Power station
Senoko Power Station is a combined cycle plant with a licensed capacity of 2,644 MW and supplies about 20 per cent of Singapore's electricity needs, according to its operator.
Senoko is an industrial subzone of Sembawang on Singapore's northern coast, best known for Senoko Power Station. Classified areas centre on the power station's gas systems and on fuel storage tank leasing and terminal services, not on the whole estate. An Ex-proof smartphone distributor in Senoko would carry the IS-04Z1 to these buyers once certification completes.
Pre-launch · certification in progress · Launching Q4 2026
Short answer. Senoko has no appointed SAMS distributor yet: the IS-04Z1 is pre-launch (certification in progress, no certificate issued, launch planned for Q4 2026), and distributor applications are open.
Status: pre-launch. IECEx, ATEX, UKEX and NEC 500 certification is in progress and no certificate has been issued; launch is planned for Q4 2026. Operator approval runs on its own timeline. Certification status. Place facts reviewed October 2026.
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Ex marking | Group, category, protection concept, gas group, temperature class | II 2 G Ex ib IIC T4 (target) |
| Gas group | IIA, IIB or IIC matched to the area drawing | IIC (target) |
| Temperature class | T-class below the ignition temperature of the gas | T4, 135 °C (target) |
| Where it applies | Senoko: Power plant gas and fuel systems, Fuel storage tanks and terminal services | Classified by the site operator |

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Senoko Industrial Zone. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
Who operates there and which kinds of classified area a handset would meet, from the SAMS site research.
Senoko Power Station is a combined cycle plant with a licensed capacity of 2,644 MW and supplies about 20 per cent of Singapore's electricity needs, according to its operator.
Senoko Energy lists Marubeni Corporation and Sembcorp Industries as its shareholders.
The station stands on the site of a former British naval base in Sembawang on Singapore's northern coast, so the shoreline is a mixture of old naval and new industrial land.
Natural gas has replaced crude oil as the main fuel since 1992, with fuel oil kept as a back-up, and stage III boilers were modified with gas burners to burn either fuel.
Senoko is best known for two uses, its power station and a fishery port, so large power plant and wholesale seafood handling share the same stretch of Sembawang's northern coastline.
Equatorial heat and humidity, with frequent heavy showers, are constant on this northern coast and affect outdoor switchyards, fuel tanks and gas metering stations.
“Ex-proof” is shorthand for equipment carrying an explosion-protection marking (the Ex mark) that matches the area it enters. The marking states the protection concept, gas or dust group and temperature class, and it must be backed by a certificate issued by a recognised body, so a phone described as Ex-proof should come with a certificate number you can check.
The IS-04Z1 is designed to carry the marking II 2 G Ex ib IIC T4. That is a target: certification is in progress, no certificate has been issued, and SAMS will publish the certificate numbers when they exist.
In Senoko. A marking check at the power station would focus on the gas fuel systems and fuel tanks, where natural gas is typically IIA and diesel vapour is a flammable liquid hazard. The IS-04Z1 target marking is II 2 G Ex ib IIC T4, not yet issued. The operator's classification drawings say which gas group and temperature class apply.
Distribution of the IS-04Z1 is by authorised partners only, and SAMS has not yet granted a territory for Senoko. Each application is reviewed on its merits. Because opening a certified Ex handset in an ordinary workshop invalidates its certificate, the partner must be able to support and service the device locally.
Not today. Until the certificates are issued the IS-04Z1 stays out of classified areas, and until launch there is nothing to purchase. You can ask for the datasheet and the certification schedule, or book a safe-area evaluation unit.
There is no list price yet. SAMS gives indicative pre-launch pricing in writing, against a stated quantity and site, and does not commit to a lead time before certification completes.
The marking target is II 2 G Ex ib IIC T4. It becomes a marking only when the certificate is issued; until then it is a design target.
Likely candidates are power plant gas and fuel systems, fuel storage tanks and terminal services. Which areas are classified, and to what zone, is set by the site operator's own area classification drawings.
Apply through the distributor page with your company details and the territory you cover. SAMS reviews applications company by company and has not yet granted a territory for Senoko.
No. Classified areas are concentrated at the power station's gas systems and at fuel storage, not across the whole industrial zone. Other tenants may have none at all. Ask the specific site for its area classification drawing before choosing equipment.
Typical examples are gas pressure-reduction and metering stations, gas turbine enclosures, fuel oil storage and pump areas, and battery or hydrogen-related rooms. Most are Zone 2 in normal operation, but Zone 1 can occur around specific equipment, so confirm with the plant.
The plant operator runs its own contractor and equipment approvals, and SAMS has no role in them. Send its procurement and HSE teams the IS-04Z1 datasheet and target marking, noting that certification is in progress and no certificate has been issued.
Other guides for Senoko Industrial Zone, other places in Singapore, and the pages behind them.
Share the site details and quantity. You will get the datasheet and the certification schedule back by email; pricing is indicative only until launch.
Tell us the zone, gas group and operator. We will send the datasheet and the certification schedule.