Climate
Mild winters and warm, wet summers; about 1,192 mm of rain a year.
Pohang's shipping port and road arteries made it strategically significant in the mid-twentieth century, and the port remains the city's sea gateway on the East Sea coast. It is headquarters of POSCO, which has an integrated steelworks there, and steel plant gas systems and dust create classified areas. This page explains what to look for in a rugged smartphone for Pohang, and where the IS-04Z1 stands against that list today.
Pre-launch · certification in progress · Launching Q4 2026
Short answer. The SAMS IS-04Z1 is the intrinsically safe smartphone covered here for Pohang: pre-launch, designed for Zone 1 and Zone 21 (marking target Ex ib IIC T4), with certification in progress and no certificate issued.
Where things stand: the IS-04Z1 has not launched, and none of its four certification routes has produced a certificate yet. An operator's own vendor approval is a separate step. Certification status. Place facts reviewed October 2026.
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Ingress protection | IP65 to IP68 sealing | IP68 design |
| Drop and shock | A stated drop height onto concrete | Specification on request |
| Explosion protection | A separate certificate and marking | In progress; not issued |
| Where it applies | Pohang: Steelworks process gas systems, Coke-making and by-product gas, Steel plant dust areas | Classified by the site operator |

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Pohang. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
A short profile of the site and the kinds of classified area that matter for portable equipment.
Mild winters and warm, wet summers; about 1,192 mm of rain a year.
POSCO's Pohang plant was dedicated in 1973 and POSCO runs two integrated steelworks, at Pohang and Gwangyang.
Pohang has a humid subtropical climate, with a January mean of 2.2 degrees Celsius, an August mean of 26.0 degrees and about 1,152 mm of rain a year, peaking in August at around 227 mm.
The steelmaker POSCO was inaugurated in Pohang in 1968 and its local plant began production in the early 1970s, bringing heavy industry to a city that had about 50,000 people in the 1960s.
The city is promoting itself as a diversified centre of environmentalism, advanced learning and culture, to reduce its reliance on heavy industry such as steelmaking.
POSCO's Pohang works runs three remaining blast furnaces after the first was shut down in December 2021, alongside basic oxygen and electric arc furnace routes.
A rugged phone is built to survive water, dust, drops and rough handling, usually rated by an IP code and a drop specification. Ruggedness is an environmental property: it says nothing about whether a phone may be used where flammable gas or dust is present. That is decided by explosion-protection certification and marking.
The IS-04Z1 combines both: an IP68 sealed rugged build and a design for Zone 1 and Zone 21 (marking target Ex ib IIC T4). The explosion-protection certificates are in progress and none has been issued.
In Pohang. Pohang has mild winters and warm, wet summers, with heavy rain across the year, and steel plants add dust and heat. IP68 sealing is designed in for the IS-04Z1 and suits that wear. It is a dust and water rating, not explosion protection, which depends on certification in progress.
A short checklist for anyone writing or reviewing the specification, with the IS-04Z1 status against each point.
No. Nothing can be bought or taken into a classified area today: certification is in progress and launch is planned for Q4 2026. What is available now is the datasheet, the written certification schedule and evaluation units for safe-area use.
SAMS has not published a price. Any figure you are offered for an uncertified Ex phone should be treated with caution; written indicative pricing is available for a defined quantity and site.
It is designed to IP68 sealing, with glove-friendly controls. Ruggedness is not explosion protection: that depends on the certificates, which are in progress.
Likely candidates are steelworks process gas systems, coke-making and by-product gas, steel plant dust areas. Which areas are classified, and to what zone, is set by the site operator's own area classification drawings.
Not exactly. Explosion proof is a broad everyday term; intrinsic safety is one protection concept, which limits energy so ignition cannot occur. Flameproof (Ex d) is a different concept that contains an explosion. The IS-04Z1 is intrinsically safe by design.
POSCO's plant has anchored the local economy since 1972, so much industrial contracting there is linked to it, though shipbuilding and other industries also exist. Contractors typically register through the operator's own vendor and safety processes, so confirm the current route.
Steel plants involve coke-oven, blast-furnace and converter gases that are toxic and flammable, plus oxygen enrichment, coal and iron-ore dust and fuel gas systems. The operator defines gas and dust zones, so ask for classification drawings before bringing handheld devices.
POSCO runs its own supplier registration and safety approvals, and SAMS has no role in them. A supplier or distributor would need to approach its procurement and HSE teams directly. Confirm requirements with the site operator, and note that the IS-04Z1 is still pre-launch.
Other guides for Pohang, other places in South Korea, and the pages behind them.
Send the site, zone and gas group and roughly how many handsets. We reply by email with the datasheet and the certification schedule.
Send the zone and gas group of your site and we will reply with the datasheet and schedule.