Climate
Mild winters and warm, wet summers; about 1,192 mm of rain a year.
The city is promoting itself as a diversified centre of environmentalism, advanced learning and culture, to reduce its reliance on heavy industry such as steelmaking. It is headquarters of POSCO, which has an integrated steelworks there, and steel plant gas systems and dust create classified areas. If you are specifying an IECEx mobile phone for Pohang, this page covers the markings, the approvals and the current certification status of the IS-04Z1.
Pre-launch · certification in progress · Launching Q4 2026
Short answer. The SAMS IS-04Z1 is the intrinsically safe smartphone covered here for Pohang: pre-launch, designed for Zone 1 and Zone 21 (marking target Ex ib IIC T4), with certification in progress and no certificate issued.
For the record, no certificate exists for the IS-04Z1 today. The programme is under way ahead of a Q4 2026 launch. A buyer's engineering review is separate from the certificate. Certification status. Place facts reviewed October 2026.
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Certificate of conformity | Number checkable on the IECEx online register | In progress; not issued |
| Standards edition | The IEC 60079 edition the certificate cites | Stated on the certificate when issued |
| Schedule of conditions | Limits of use, batteries and accessories | Published with the certificate |
| Where it applies | Pohang: Steelworks process gas systems, Coke-making and by-product gas, Steel plant dust areas | Classified by the site operator |

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Pohang. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
The companies on site and the hazardous-area types a handset is likely to meet there.
Mild winters and warm, wet summers; about 1,192 mm of rain a year.
POSCO's Pohang plant was dedicated in 1973 and POSCO runs two integrated steelworks, at Pohang and Gwangyang.
The steelmaker POSCO was inaugurated in Pohang in 1968 and its local plant began production in the early 1970s, bringing heavy industry to a city that had about 50,000 people in the 1960s.
Pohang's shipping port and road arteries made it strategically significant in the mid-twentieth century, and the port remains the city's sea gateway on the East Sea coast.
POSCO's Pohang works runs three remaining blast furnaces after the first was shut down in December 2021, alongside basic oxygen and electric arc furnace routes.
After four expansion phases the Pohang plant's crude steel capacity rose from 1.03 million tonnes a year at start-up to 9.1 million tonnes by 1983.
IECEx is the international scheme for certifying equipment used in explosive atmospheres. A certificate of conformity is issued by an accredited certification body against a specific edition of the IEC 60079 standards and carries a schedule of conditions of safe use. It is not a legal requirement in most countries on its own, but many national schemes accept it as the technical basis.
The IECEx certificate for the IS-04Z1 is in progress and has not been issued. The marking target is Ex ib IIC T4, the intrinsic safety concept for Zone 1 gas with the hardest gas group (IIC) and a 135 °C temperature class.
In Pohang. POSCO is a global steel company with plant-engineering contractors and equipment suppliers from abroad. IECEx is a familiar reference for them, with a certificate of conformity and a schedule of conditions. The IS-04Z1 has neither yet, because certification is still in progress.
A short checklist for anyone writing or reviewing the specification, with the IS-04Z1 status against each point.
Not yet. The IS-04Z1 is pre-launch and its certification is still in progress ahead of a Q4 2026 launch. No unit goes into a classified area before the certificate covering it exists. The datasheet, the certification schedule and safe-area evaluation units are available now.
SAMS has not published a price. Any figure you are offered for an uncertified Ex phone should be treated with caution; written indicative pricing is available for a defined quantity and site.
No. The IECEx certificate is in progress and has not been issued. SAMS will publish the number when it exists.
Likely candidates are steelworks process gas systems, coke-making and by-product gas, steel plant dust areas. Which areas are classified, and to what zone, is set by the site operator's own area classification drawings.
Not exactly. Explosion proof is a broad everyday term; intrinsic safety is one protection concept, which limits energy so ignition cannot occur. Flameproof (Ex d) is a different concept that contains an explosion. The IS-04Z1 is intrinsically safe by design.
POSCO's plant has anchored the local economy since 1972, so much industrial contracting there is linked to it, though shipbuilding and other industries also exist. Contractors typically register through the operator's own vendor and safety processes, so confirm the current route.
Steel plants involve coke-oven, blast-furnace and converter gases that are toxic and flammable, plus oxygen enrichment, coal and iron-ore dust and fuel gas systems. The operator defines gas and dust zones, so ask for classification drawings before bringing handheld devices.
POSCO runs its own supplier registration and safety approvals, and SAMS has no role in them. A supplier or distributor would need to approach its procurement and HSE teams directly. Confirm requirements with the site operator, and note that the IS-04Z1 is still pre-launch.
Related guides for Pohang and for South Korea.
Tell us what you need to equip and where. The SAMS team answers by email with the datasheet and where each certification route stands.
Name the site and the operator and we will send what is available before launch.