Port
Yeongil Bay supports a port that handled 54.8 million tonnes in 2006.
Pohang is North Gyeongsang's largest city, with about 491,000 residents, on the East Sea coast beside Yeongil Bay. The steelmaker POSCO was inaugurated in Pohang in 1968 and its local plant began production in the early 1970s, bringing heavy industry to a city that had about 50,000 people in the 1960s. Distribution partners for Pohang are being identified ahead of the Q4 2026 launch of the IS-04Z1.
Pre-launch · certification in progress · Launching Q4 2026
Short answer. Pohang has no appointed SAMS distributor yet: the IS-04Z1 is pre-launch (certification in progress, no certificate issued, launch planned for Q4 2026), and distributor applications are open.
Current position: certification in progress, nothing issued, launch targeted for Q4 2026. A buyer's engineering review is separate from the certificate. Certification status. Place facts reviewed October 2026.
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Marking | II 2 G Ex ib IIC T4 on the rating plate | Design target; not yet marked |
| EU-type examination certificate | Notified body number and certificate ID | In progress with TÜV; not issued |
| IECEx certificate of conformity | Number listed on the IECEx online register | In progress; not issued |
| Where it applies | Pohang: Steelworks process gas systems, Coke-making and by-product gas, Steel plant dust areas | Classified by the site operator |

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Pohang. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
Who operates there and which kinds of classified area a handset would meet, from the SAMS site research.
Yeongil Bay supports a port that handled 54.8 million tonnes in 2006.
Mild winters and warm, wet summers; about 1,192 mm of rain a year.
After four expansion phases the Pohang plant's crude steel capacity rose from 1.03 million tonnes a year at start-up to 9.1 million tonnes by 1983.
The local economy has combined iron, steel, shipbuilding and fisheries, and the city is now trying to diversify away from heavy industry towards advanced learning, environmental projects and culture.
Pohang is the largest city in North Gyeongsang Province, with 499,363 residents in 2022, on Yeongil Bay at the mouth of the Hyeongsan River facing the East Sea.
Pohang has a humid subtropical climate, with a January mean of 2.2 degrees Celsius, an August mean of 26.0 degrees and about 1,152 mm of rain a year, peaking in August at around 227 mm.
ATEX is the European legal framework for equipment used in explosive atmospheres (Directive 2014/34/EU). IECEx is the international certification scheme built on the IEC 60079 standards. Buyers outside Europe often ask for both: an IECEx certificate is the technical evidence most national regimes build on, while ATEX is the legal route into the European market.
For the IS-04Z1 both routes are in progress with TÜV in Germany and neither certificate has been issued. The marking target is II 2 G Ex ib IIC T4: equipment Group II (surface industry), Category 2 (Zone 1 gas), protection concept ib (intrinsic safety), gas group IIC and temperature class T4.
In Pohang. A reviewer at a steelworks would expect clear evidence for any handheld used near process gas systems, and international suppliers and plant-engineering contractors often bring ATEX or IECEx documents. The IS-04Z1 certification is in progress, so only a datasheet is available. POSCO decides which evidence it accepts.
A distributor for Pohang would carry the IS-04Z1 after certification completes; the Q4 2026 launch is the planning date and no appointment has been made. SAMS reviews applicants one by one and prefers companies with their own Ex-competent technical and service staff, since certified devices must not be repaired outside approved channels.
Not yet. The IS-04Z1 is pre-launch and its certification is still in progress ahead of a Q4 2026 launch. No unit goes into a classified area before the certificate covering it exists. The datasheet, the certification schedule and safe-area evaluation units are available now.
No price is published. While certification is in progress there is no list price and no committed lead time, and a supplier quoting a firm figure for an uncertified Ex handset is promising something it cannot stand behind. Indicative pre-launch pricing is issued in writing against a stated quantity and site.
Not yet. Both routes are in progress with TÜV in Germany and no certificate has been issued. Any listing that says otherwise is wrong.
Likely candidates are steelworks process gas systems, coke-making and by-product gas, steel plant dust areas. Which areas are classified, and to what zone, is set by the site operator's own area classification drawings.
Apply through the distributor page with your company details and the territory you cover. SAMS reviews applications company by company and has not yet granted a territory for Pohang.
Winters are mild by Korean standards, with a January mean near 2 degrees, while summers reach about 26 degrees with the heaviest rain in August. Sea air and humidity are the main concerns, so devices typically need good sealing and routine cleaning.
Pohang is on the East Sea coast with a shipping port and road links, and most equipment arrives by road from other Korean ports or airports. Allow time for customs clearance and for site gate checks on electronic devices at the steelworks.
They can. Coke-making and by-product gas systems may contain gases such as hydrogen or carbon monoxide, which affect the gas group needed, and plant dust areas need a dust classification. The IS-04Z1 has no certificate yet. Ask POSCO which gas and dust groups apply.
Related guides for Pohang and for South Korea.
Send the site, zone and gas group and roughly how many handsets. We reply by email with the datasheet and the certification schedule.
Tell us the zone, gas group and operator. We will send the datasheet and the certification schedule.