Steelworks
POSCO's Pohang plant was dedicated in 1973 and POSCO runs two integrated steelworks, at Pohang and Gwangyang.
Pohang is North Gyeongsang's largest city, with about 491,000 residents, on the East Sea coast beside Yeongil Bay. It is headquarters of POSCO, which has an integrated steelworks there, and steel plant gas systems and dust create classified areas. An IECEx mobile phone distributor in Pohang would carry the IS-04Z1 to these buyers once certification completes.
Pre-launch · certification in progress · Launching Q4 2026
Short answer. Pohang has no appointed SAMS distributor yet: the IS-04Z1 is pre-launch (certification in progress, no certificate issued, launch planned for Q4 2026), and distributor applications are open.
Current position: certification in progress, nothing issued, launch targeted for Q4 2026. A buyer's engineering review is separate from the certificate. Certification status. Place facts reviewed October 2026.
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Certificate of conformity | Number checkable on the IECEx online register | In progress; not issued |
| Standards edition | The IEC 60079 edition the certificate cites | Stated on the certificate when issued |
| Schedule of conditions | Limits of use, batteries and accessories | Published with the certificate |
| Where it applies | Pohang: Steelworks process gas systems, Coke-making and by-product gas, Steel plant dust areas | Classified by the site operator |

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Pohang. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
A short profile of the site and the kinds of classified area that matter for portable equipment.
POSCO's Pohang plant was dedicated in 1973 and POSCO runs two integrated steelworks, at Pohang and Gwangyang.
Yeongil Bay supports a port that handled 54.8 million tonnes in 2006.
POSCO's Pohang works runs three remaining blast furnaces after the first was shut down in December 2021, alongside basic oxygen and electric arc furnace routes.
After four expansion phases the Pohang plant's crude steel capacity rose from 1.03 million tonnes a year at start-up to 9.1 million tonnes by 1983.
The local economy has combined iron, steel, shipbuilding and fisheries, and the city is now trying to diversify away from heavy industry towards advanced learning, environmental projects and culture.
Pohang is the largest city in North Gyeongsang Province, with 499,363 residents in 2022, on Yeongil Bay at the mouth of the Hyeongsan River facing the East Sea.
IECEx is the international scheme for certifying equipment used in explosive atmospheres. A certificate of conformity is issued by an accredited certification body against a specific edition of the IEC 60079 standards and carries a schedule of conditions of safe use. It is not a legal requirement in most countries on its own, but many national schemes accept it as the technical basis.
The IECEx certificate for the IS-04Z1 is in progress and has not been issued. The marking target is Ex ib IIC T4, the intrinsic safety concept for Zone 1 gas with the hardest gas group (IIC) and a 135 °C temperature class.
In Pohang. POSCO is a global steel company with plant-engineering contractors and equipment suppliers from abroad. IECEx is a familiar reference for them, with a certificate of conformity and a schedule of conditions. The IS-04Z1 has neither yet, because certification is still in progress.
Distribution of the IS-04Z1 is by authorised partners only, and SAMS has not yet granted a territory for Pohang. Each application is reviewed on its merits. Because opening a certified Ex handset in an ordinary workshop invalidates its certificate, the partner must be able to support and service the device locally.
Not yet. The IS-04Z1 is pre-launch and its certification is still in progress ahead of a Q4 2026 launch. No unit goes into a classified area before the certificate covering it exists. The datasheet, the certification schedule and safe-area evaluation units are available now.
There is no list price yet. SAMS gives indicative pre-launch pricing in writing, against a stated quantity and site, and does not commit to a lead time before certification completes.
No. The IECEx certificate is in progress and has not been issued. SAMS will publish the number when it exists.
Likely candidates are steelworks process gas systems, coke-making and by-product gas, steel plant dust areas. Which areas are classified, and to what zone, is set by the site operator's own area classification drawings.
Apply through the distributor page with your company details and the territory you cover. SAMS reviews applications company by company and has not yet granted a territory for Pohang.
Winters are mild by Korean standards, with a January mean near 2 degrees, while summers reach about 26 degrees with the heaviest rain in August. Sea air and humidity are the main concerns, so devices typically need good sealing and routine cleaning.
Pohang is on the East Sea coast with a shipping port and road links, and most equipment arrives by road from other Korean ports or airports. Allow time for customs clearance and for site gate checks on electronic devices at the steelworks.
They can. Coke-making and by-product gas systems may contain gases such as hydrogen or carbon monoxide, which affect the gas group needed, and plant dust areas need a dust classification. The IS-04Z1 has no certificate yet. Ask POSCO which gas and dust groups apply.
Other guides for Pohang, other places in South Korea, and the pages behind them.
Tell us what you need to equip and where. The SAMS team answers by email with the datasheet and where each certification route stands.
Name the site and the operator and we will send what is available before launch.