Port
Yeongil Bay supports a port that handled 54.8 million tonnes in 2006.
Pohang is North Gyeongsang's largest city, with about 491,000 residents, on the East Sea coast beside Yeongil Bay. The city is promoting itself as a diversified centre of environmentalism, advanced learning and culture, to reduce its reliance on heavy industry such as steelmaking. This page explains what to look for in a hazardous area mobile phone for Pohang, and where the IS-04Z1 stands against that list today.
Pre-launch · certification in progress · Launching Q4 2026
Short answer. The SAMS IS-04Z1 is the intrinsically safe smartphone covered here for Pohang: pre-launch, designed for Zone 1 and Zone 21 (marking target Ex ib IIC T4), with certification in progress and no certificate issued.
Where things stand: the IS-04Z1 has not launched, and none of its four certification routes has produced a certificate yet. A buyer's engineering review is separate from the certificate. Certification status. Place facts reviewed October 2026.
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Zone | 0, 1 or 2 for gas; 20, 21 or 22 for dust | Designed for Zone 1 and Zone 21 |
| Gas group | IIA, IIB or IIC | IIC (target) |
| Area drawing | The operator's own classification drawing | Decided by the site operator |
| Where it applies | Pohang: Steelworks process gas systems, Coke-making and by-product gas, Steel plant dust areas | Classified by the site operator |

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Pohang. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
A short profile of the site and the kinds of classified area that matter for portable equipment.
Yeongil Bay supports a port that handled 54.8 million tonnes in 2006.
Mild winters and warm, wet summers; about 1,192 mm of rain a year.
The local economy has combined iron, steel, shipbuilding and fisheries, and the city is now trying to diversify away from heavy industry towards advanced learning, environmental projects and culture.
Pohang is the largest city in North Gyeongsang Province, with 499,363 residents in 2022, on Yeongil Bay at the mouth of the Hyeongsan River facing the East Sea.
Pohang has a humid subtropical climate, with a January mean of 2.2 degrees Celsius, an August mean of 26.0 degrees and about 1,152 mm of rain a year, peaking in August at around 227 mm.
The steelmaker POSCO was inaugurated in Pohang in 1968 and its local plant began production in the early 1970s, bringing heavy industry to a city that had about 50,000 people in the 1960s.
A hazardous area is a place where flammable gas, vapour or combustible dust may be present. Standards divide these into zones: Zones 0, 1 and 2 for gas and vapour, and Zones 20, 21 and 22 for dust. Zone 1 and Zone 21 are the tier where an explosive atmosphere is likely to occur in normal operation, which is where the IS-04Z1 is designed to work. Anything carried in must be marked for the zone, gas group and temperature class of the area.
No certificate has been issued for the IS-04Z1 yet, so it must not be taken into a classified area until the certificate covering it exists and the site operator has accepted it.
In Pohang. Classified areas at the works include process gas systems, coke-making and by-product gas, and steel plant dust areas. POSCO classifies them, not SAMS. No POSCO document was read for this page, so a specifier should ask for the actual classification rather than rely on general steelworks practice.
A short checklist for anyone writing or reviewing the specification, with the IS-04Z1 status against each point.
Not today. Until the certificates are issued the IS-04Z1 stays out of classified areas, and until launch there is nothing to purchase. You can ask for the datasheet and the certification schedule, or book a safe-area evaluation unit.
No price is published. While certification is in progress there is no list price and no committed lead time, and a supplier quoting a firm figure for an uncertified Ex handset is promising something it cannot stand behind. Indicative pre-launch pricing is issued in writing against a stated quantity and site.
Zone 1 and Zone 21 (gas and dust) with gas group IIC and temperature class T4, subject to certification. It must not be used in a classified area before its certificate is issued and the site has accepted it.
Likely candidates are steelworks process gas systems, coke-making and by-product gas, steel plant dust areas. Which areas are classified, and to what zone, is set by the site operator's own area classification drawings.
Not exactly. Explosion proof is a broad everyday term; intrinsic safety is one protection concept, which limits energy so ignition cannot occur. Flameproof (Ex d) is a different concept that contains an explosion. The IS-04Z1 is intrinsically safe by design.
POSCO's plant has anchored the local economy since 1972, so much industrial contracting there is linked to it, though shipbuilding and other industries also exist. Contractors typically register through the operator's own vendor and safety processes, so confirm the current route.
Steel plants involve coke-oven, blast-furnace and converter gases that are toxic and flammable, plus oxygen enrichment, coal and iron-ore dust and fuel gas systems. The operator defines gas and dust zones, so ask for classification drawings before bringing handheld devices.
POSCO runs its own supplier registration and safety approvals, and SAMS has no role in them. A supplier or distributor would need to approach its procurement and HSE teams directly. Confirm requirements with the site operator, and note that the IS-04Z1 is still pre-launch.
Related guides for Pohang and for South Korea.
Tell us what you need to equip and where. The SAMS team answers by email with the datasheet and where each certification route stands.
Send the zone and gas group of your site and we will reply with the datasheet and schedule.