Steelworks
POSCO's Pohang plant was dedicated in 1973 and POSCO runs two integrated steelworks, at Pohang and Gwangyang.
Pohang is North Gyeongsang's largest city, with about 491,000 residents, on the East Sea coast beside Yeongil Bay. It is headquarters of POSCO, which has an integrated steelworks there, and steel plant gas systems and dust create classified areas. Distribution partners for Pohang are being identified ahead of the Q4 2026 launch of the IS-04Z1.
Pre-launch · certification in progress · Launching Q4 2026
Short answer. Pohang has no appointed SAMS distributor yet: the IS-04Z1 is pre-launch (certification in progress, no certificate issued, launch planned for Q4 2026), and distributor applications are open.
Where things stand: the IS-04Z1 has not launched, and none of its four certification routes has produced a certificate yet. An operator's own vendor approval is a separate step. Certification status. Place facts reviewed October 2026.
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Ex marking | Group, category, protection concept, gas group, temperature class | II 2 G Ex ib IIC T4 (target) |
| Gas group | IIA, IIB or IIC matched to the area drawing | IIC (target) |
| Temperature class | T-class below the ignition temperature of the gas | T4, 135 °C (target) |
| Where it applies | Pohang: Steelworks process gas systems, Coke-making and by-product gas, Steel plant dust areas | Classified by the site operator |

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Pohang. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
The companies on site and the hazardous-area types a handset is likely to meet there.
POSCO's Pohang plant was dedicated in 1973 and POSCO runs two integrated steelworks, at Pohang and Gwangyang.
Yeongil Bay supports a port that handled 54.8 million tonnes in 2006.
POSCO's Pohang works runs three remaining blast furnaces after the first was shut down in December 2021, alongside basic oxygen and electric arc furnace routes.
After four expansion phases the Pohang plant's crude steel capacity rose from 1.03 million tonnes a year at start-up to 9.1 million tonnes by 1983.
The local economy has combined iron, steel, shipbuilding and fisheries, and the city is now trying to diversify away from heavy industry towards advanced learning, environmental projects and culture.
Pohang is the largest city in North Gyeongsang Province, with 499,363 residents in 2022, on Yeongil Bay at the mouth of the Hyeongsan River facing the East Sea.
“Ex-proof” is shorthand for equipment carrying an explosion-protection marking (the Ex mark) that matches the area it enters. The marking states the protection concept, gas or dust group and temperature class, and it must be backed by a certificate issued by a recognised body, so a phone described as Ex-proof should come with a certificate number you can check.
The IS-04Z1 is designed to carry the marking II 2 G Ex ib IIC T4. That is a target: certification is in progress, no certificate has been issued, and SAMS will publish the certificate numbers when they exist.
In Pohang. A marking check at a steelworks should note that process gases from coke-making and by-product gas systems are not typical oil and gas gases. Hydrogen-rich or carbon monoxide mixtures may need specific gas groups. The IS-04Z1 target marking is II 2 G Ex ib IIC T4, not yet issued, so the operator decides.
Distribution of the IS-04Z1 is by authorised partners only, and SAMS has not yet granted a territory for Pohang. Each application is reviewed on its merits. Because opening a certified Ex handset in an ordinary workshop invalidates its certificate, the partner must be able to support and service the device locally.
Not yet. The IS-04Z1 is pre-launch and its certification is still in progress ahead of a Q4 2026 launch. No unit goes into a classified area before the certificate covering it exists. The datasheet, the certification schedule and safe-area evaluation units are available now.
No price is published. While certification is in progress there is no list price and no committed lead time, and a supplier quoting a firm figure for an uncertified Ex handset is promising something it cannot stand behind. Indicative pre-launch pricing is issued in writing against a stated quantity and site.
The marking target is II 2 G Ex ib IIC T4. It becomes a marking only when the certificate is issued; until then it is a design target.
Likely candidates are steelworks process gas systems, coke-making and by-product gas, steel plant dust areas. Which areas are classified, and to what zone, is set by the site operator's own area classification drawings.
Apply through the distributor page with your company details and the territory you cover. SAMS reviews applications company by company and has not yet granted a territory for Pohang.
Winters are mild by Korean standards, with a January mean near 2 degrees, while summers reach about 26 degrees with the heaviest rain in August. Sea air and humidity are the main concerns, so devices typically need good sealing and routine cleaning.
Pohang is on the East Sea coast with a shipping port and road links, and most equipment arrives by road from other Korean ports or airports. Allow time for customs clearance and for site gate checks on electronic devices at the steelworks.
They can. Coke-making and by-product gas systems may contain gases such as hydrogen or carbon monoxide, which affect the gas group needed, and plant dust areas need a dust classification. The IS-04Z1 has no certificate yet. Ask POSCO which gas and dust groups apply.
Other guides for Pohang, other places in South Korea, and the pages behind them.
Tell us what you need to equip and where. The SAMS team answers by email with the datasheet and where each certification route stands.
Tell us the zone, gas group and operator. We will send the datasheet and the certification schedule.