Industrial Heartland
The area adjoins Alberta's Industrial Heartland, a 582 square kilometre zone dedicated to hydrocarbon processing, so contractors and service firms are close by.
Refinery Row, in Strathcona County east of Edmonton, includes Imperial Oil's Strathcona Refinery and a Suncor refinery. Refinery Row, a concentration of refineries in west Sherwood Park just east of Edmonton, includes the Strathcona Refinery (Imperial Oil) and the Suncor Edmonton Refinery. Distribution partners for Edmonton refineries (Refinery Row) are being identified ahead of the Q4 2026 launch of the IS-04Z1.
Pre-launch · certification in progress · Launching Q4 2026
Short answer. Edmonton refineries (Refinery Row) has no appointed SAMS distributor yet: the IS-04Z1 is pre-launch (certification in progress, no certificate issued, launch planned for Q4 2026), and distributor applications are open.
Where things stand: the IS-04Z1 has not launched, and none of its four certification routes has produced a certificate yet. An operator's own vendor approval is a separate step. Certification status. Place facts reviewed October 2026.
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Level of protection | ia, ib or ic matched to the zone | ib, for Zone 1 |
| Entity parameters | Uo, Io and Po within the device limits | Published with the certificate |
| Accessories | Chargers and cases certified with the device | Defined at certification |
| Where it applies | Edmonton refineries (Refinery Row): Loading racks, Wastewater treatment, Refinery process units | Classified by the site operator |

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Edmonton Refinery. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
A short profile of the site and the kinds of classified area that matter for portable equipment.
The area adjoins Alberta's Industrial Heartland, a 582 square kilometre zone dedicated to hydrocarbon processing, so contractors and service firms are close by.
Edmonton winters are cold enough that battery performance and glove use are practical considerations for outdoor work.
Alberta's Industrial Heartland covers 533 km2 across Fort Saskatchewan, Lamont, Strathcona and Sturgeon counties, plus the 49 km2 Edmonton Energy and Technology Park, for a total of 582 km2 east of Edmonton.
A second concentration of refineries and upgraders lies around Scotford in Strathcona County, separate from Refinery Row, so the Edmonton area has more than one distinct industrial cluster.
Air quality across the Industrial Heartland is monitored by the not-for-profit Fort Air Partnership, formed in 1997, an indication of the continuous monitoring regime that operates around the plants.
Alberta's Industrial Heartland Association was founded in 1998 by Fort Saskatchewan, Lamont County, Strathcona County and Sturgeon County, and Edmonton joined in 2010.
Intrinsic safety limits the electrical and thermal energy in a circuit so that neither a spark nor a hot surface can ignite a gas or dust atmosphere, even when a fault occurs. The ib level, used for Zone 1, tolerates one fault. It is the usual way to make a handheld device that a worker carries continuously through a hazardous area.
The IS-04Z1 is designed on this principle for Zone 1 and Zone 21 (marking target II 2 G Ex ib IIC T4). Intrinsic safety is a design basis, not a certificate: certification is in progress and none has been issued yet.
In Edmonton refineries (Refinery Row). Inspectors and operators on refinery rounds walk between process units, crude and product tank farms, loading racks and wastewater treatment. A handheld intrinsically safe device means records and photos can be taken at the point of inspection. Turnaround planning would use the same device, subject to the operator's permit system.
SAMS is appointing authorised distributors ahead of the Q4 2026 launch. No territory has been granted for Edmonton refineries (Refinery Row) yet and applications are reviewed company by company. Because a certified Ex device cannot be opened by an ordinary phone workshop without invalidating its certificate, SAMS looks for partners who can provide competent technical support and after-sales service locally.
Not today. Until the certificates are issued the IS-04Z1 stays out of classified areas, and until launch there is nothing to purchase. You can ask for the datasheet and the certification schedule, or book a safe-area evaluation unit.
No price is published. While certification is in progress there is no list price and no committed lead time, and a supplier quoting a firm figure for an uncertified Ex handset is promising something it cannot stand behind. Indicative pre-launch pricing is issued in writing against a stated quantity and site.
The circuits are designed to limit energy so a spark or hot surface cannot ignite a gas or dust atmosphere, even with one fault (level ib, Zone 1). Certification of that design is in progress.
Likely candidates are refinery process units, crude and product tank farms, loading racks, wastewater treatment. Which areas are classified, and to what zone, is set by the site operator's own area classification drawings.
Apply through the distributor page with your company details and the territory you cover. SAMS reviews applications company by company and has not yet granted a territory for Edmonton refineries (Refinery Row).
Cold winters affect outdoor work, and refineries run planned turnarounds outside peak demand. Dates are operator-set, so ask the operator's contractor team about shutdown windows and which devices are approved for process areas.
Refinery Row in Sherwood Park hosts the Strathcona (Imperial) and Suncor Edmonton refineries, and the Scotford and Industrial Heartland cluster has upgrading and refining capacity. Confirm which operator and site you will visit, because device rules are set per site.
Possibly. Equipment is normally approved by the site operator's HSE or electrical authority, and each operator runs its own process. Imperial Oil and Suncor may ask for different documents or trials. A single manufacturer certificate would help, but ask each operator what it requires before moving a device between sites.
Related guides for Edmonton Refinery and for Canada.
Share the site details and quantity. You will get the datasheet and the certification schedule back by email; pricing is indicative only until launch.
Tell us the zone, gas group and operator. We will send the datasheet and the certification schedule.