Strathcona Refinery
Imperial's Strathcona Refinery opened in 1975, employs about 450 people and is reported at roughly 187,000 barrels per day.
Refinery Row, in Strathcona County east of Edmonton, includes Imperial Oil's Strathcona Refinery and a Suncor refinery. Crude processing units, tank farms and loading areas contain classified areas where Zone 1 and Zone 2 equipment is required. If you are specifying an industrial mobile phone for Edmonton refineries (Refinery Row), this page covers the markings, the approvals and the current certification status of the IS-04Z1.
Pre-launch · certification in progress · Launching Q4 2026
Short answer. The SAMS IS-04Z1 is the intrinsically safe smartphone covered here for Edmonton refineries (Refinery Row): pre-launch, designed for Zone 1 and Zone 21 (marking target Ex ib IIC T4), with certification in progress and no certificate issued.
Where things stand: the IS-04Z1 has not launched, and none of its four certification routes has produced a certificate yet. A buyer's engineering review is separate from the certificate. Certification status. Place facts reviewed October 2026.
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Ingress protection | IP rating for dust and water | IP68 design |
| Fleet management | EMM and MDM support | Android 16 with EMM and MDM |
| Explosion protection | A separate certificate and marking | In progress; not issued |
| Where it applies | Edmonton refineries (Refinery Row): Refinery process units, Crude and product tank farms, Loading racks | Classified by the site operator |

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Edmonton Refinery. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
The companies on site and the hazardous-area types a handset is likely to meet there.
Imperial's Strathcona Refinery opened in 1975, employs about 450 people and is reported at roughly 187,000 barrels per day.
The area adjoins Alberta's Industrial Heartland, a 582 square kilometre zone dedicated to hydrocarbon processing, so contractors and service firms are close by.
Alberta's Industrial Heartland covers 533 km2 across Fort Saskatchewan, Lamont, Strathcona and Sturgeon counties, plus the 49 km2 Edmonton Energy and Technology Park, for a total of 582 km2 east of Edmonton.
A second concentration of refineries and upgraders lies around Scotford in Strathcona County, separate from Refinery Row, so the Edmonton area has more than one distinct industrial cluster.
Air quality across the Industrial Heartland is monitored by the not-for-profit Fort Air Partnership, formed in 1997, an indication of the continuous monitoring regime that operates around the plants.
Alberta's Industrial Heartland Association was founded in 1998 by Fort Saskatchewan, Lamont County, Strathcona County and Sturgeon County, and Edmonton joined in 2010.
“Industrial” describes a phone built for plant conditions: sealed, drop-resistant and manageable at fleet scale through Android Enterprise. It does not by itself mean the phone may enter a classified area. Only a device with a valid explosion-protection certificate and marking may do that.
The IS-04Z1 is designed to be both an industrial Android phone (IP68, 4,000 mAh battery, 50 MP camera, Android 16 with EMM and MDM support) and an intrinsically safe one. Its explosion-protection certificates are in progress and have not been issued.
In Edmonton refineries (Refinery Row). A compact industrial cluster means contractors and service firms are close by and often move between sites. That favours central EMM or MDM enrolment, with clear device ownership and return procedures. The IS-04Z1 is designed for Android 16 management, and charging would be organised in safe areas away from process units.
A short checklist for anyone writing or reviewing the specification, with the IS-04Z1 status against each point.
Not yet. The IS-04Z1 is pre-launch and its certification is still in progress ahead of a Q4 2026 launch. No unit goes into a classified area before the certificate covering it exists. The datasheet, the certification schedule and safe-area evaluation units are available now.
No price is published. While certification is in progress there is no list price and no committed lead time, and a supplier quoting a firm figure for an uncertified Ex handset is promising something it cannot stand behind. Indicative pre-launch pricing is issued in writing against a stated quantity and site.
Yes by design: IP68 sealing, a 4,000 mAh battery, a 50 MP camera and Android 16 with EMM and MDM support. The explosion-protection certificates are separate and still in progress.
Likely candidates are refinery process units, crude and product tank farms, loading racks, wastewater treatment. Which areas are classified, and to what zone, is set by the site operator's own area classification drawings.
Not exactly. Explosion proof is a broad everyday term; intrinsic safety is one protection concept, which limits energy so ignition cannot occur. Flameproof (Ex d) is a different concept that contains an explosion. The IS-04Z1 is intrinsically safe by design.
It is a 582 km2 cluster of refineries, upgraders and chemical plants east of Edmonton across several counties. Because many operators share the area, contractor induction and device rules differ by plant. Confirm site requirements before mobilising.
Typically the operator checks Ex certification marking, gas group and temperature class against the area classification, and may require Canadian recognition of the certificate. Confirm accepted schemes and approvals with the site's electrical authority.
It can be planned for, but turnaround work is run under the operator's permit system, which still controls hot work and entry. An intrinsically safe handheld may support inspection records and photos in classified areas once certified. Confirm with the operator which areas, zones and gas groups apply to each task.
Other guides for Edmonton Refinery, other places in Canada, and the pages behind them.
Share the site details and quantity. You will get the datasheet and the certification schedule back by email; pricing is indicative only until launch.
Send the zone and gas group of your site and we will reply with the datasheet and schedule.