Expansion
A 431 kilotonne per year linear low density polyethylene unit expanded the site's polyethylene capacity by about 40 per cent.
Red Deer is a central Alberta city, and NOVA Chemicals' Joffre complex lies nearby. Nearly 70 percent of Joffre's ethylene is used on site to make over 3.4 billion pounds of polyethylene a year, and the site is 21 km east of Red Deer on Highway 11. Distribution partners for Red Deer and Joffre industrial area are being identified ahead of the Q4 2026 launch of the IS-04Z1.
Pre-launch · certification in progress · Launching Q4 2026
Short answer. Red Deer and Joffre industrial area has no appointed SAMS distributor yet: the IS-04Z1 is pre-launch (certification in progress, no certificate issued, launch planned for Q4 2026), and distributor applications are open.
Status: pre-launch. IECEx, ATEX, UKEX and NEC 500 certification is in progress and no certificate has been issued; launch is planned for Q4 2026. A buyer's engineering review is separate from the certificate. Certification status. Place facts reviewed October 2026.
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Marking | II 2 G Ex ib IIC T4 on the rating plate | Design target; not yet marked |
| EU-type examination certificate | Notified body number and certificate ID | In progress with TÜV; not issued |
| IECEx certificate of conformity | Number listed on the IECEx online register | In progress; not issued |
| Where it applies | Red Deer and Joffre industrial area: Ethane feedstock handling, Hydrocarbon storage, Ethylene plants | Classified by the site operator |

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Red Deer Industrial. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
Who operates there and which kinds of classified area a handset would meet, from the SAMS site research.
A 431 kilotonne per year linear low density polyethylene unit expanded the site's polyethylene capacity by about 40 per cent.
Joffre lies between Edmonton and Calgary, so contractors can be drawn from either city.
NOVA Chemicals operates more than 385 km of pipelines across Alberta, carrying feedstocks and products between sites and customers.
NOVA Chemicals' Joffre site covers 900 acres, with three ethylene and two polyethylene plants, and employs over 800 permanent staff, about 350 resident contractors and up to 1,200 contractors during turnarounds.
NOVA Chemicals has combined with Borouge and Borealis to form Borouge International, so supplier and contractor registration may follow the new group structure; confirm with the company.
Red Deer expanded rapidly after major oil discoveries in Alberta in the late 1940s and became a centre for oil and gas and related industries, including the Joffre Cogeneration Plant.
ATEX is the European legal framework for equipment used in explosive atmospheres (Directive 2014/34/EU). IECEx is the international certification scheme built on the IEC 60079 standards. Buyers outside Europe often ask for both: an IECEx certificate is the technical evidence most national regimes build on, while ATEX is the legal route into the European market.
For the IS-04Z1 both routes are in progress with TÜV in Germany and neither certificate has been issued. The marking target is II 2 G Ex ib IIC T4: equipment Group II (surface industry), Category 2 (Zone 1 gas), protection concept ib (intrinsic safety), gas group IIC and temperature class T4.
In Red Deer and Joffre industrial area. A reviewer at NOVA Chemicals' Joffre complex near Red Deer would expect certificate evidence matched to ethylene and polyethylene plants and ethane handling. A dual ATEX and IECEx route helps contractors who also serve international petrochemical sites. The IS-04Z1 holds no certificate yet and certification is in progress.
SAMS is appointing authorised distributors ahead of the Q4 2026 launch. No territory has been granted for Red Deer and Joffre industrial area yet and applications are reviewed company by company. Because a certified Ex device cannot be opened by an ordinary phone workshop without invalidating its certificate, SAMS looks for partners who can provide competent technical support and after-sales service locally.
No. Nothing can be bought or taken into a classified area today: certification is in progress and launch is planned for Q4 2026. What is available now is the datasheet, the written certification schedule and evaluation units for safe-area use.
No price is published. While certification is in progress there is no list price and no committed lead time, and a supplier quoting a firm figure for an uncertified Ex handset is promising something it cannot stand behind. Indicative pre-launch pricing is issued in writing against a stated quantity and site.
Not yet. Both routes are in progress with TÜV in Germany and no certificate has been issued. Any listing that says otherwise is wrong.
Likely candidates are ethylene plants, polyethylene plants, ethane feedstock handling, hydrocarbon storage. Which areas are classified, and to what zone, is set by the site operator's own area classification drawings.
Apply through the distributor page with your company details and the territory you cover. SAMS reviews applications company by company and has not yet granted a territory for Red Deer and Joffre industrial area.
Yes, about 21 km east on Highway 11, so Red Deer offers hotels, shops and service companies nearby. Confirm freight and customs paths if importing equipment, and check site gate rules.
Central Alberta winters are cold, so batteries and displays suffer at low temperature. Choose low-temperature-rated devices and confirm the operator's winter guidance and temperature class for outdoor areas.
Not without approval. Joffre lies between the two cities, so contractors can come from either, but the operator decides which devices may enter classified areas. A device would need suitable marking and often registration in the plant's system. Ask NOVA's HSE team for its contractor equipment rules.
Other guides for Red Deer Industrial, other places in Canada, and the pages behind them.
Tell us what you need to equip and where. The SAMS team answers by email with the datasheet and where each certification route stands.
Tell us the zone, gas group and operator. We will send the datasheet and the certification schedule.