Provincial regulation
Mine safety is regulated province by province; in Ontario, for example, Regulation 854 (Mines and Mining Plants) under the Occupational Health and Safety Act includes a part on electrical equipment.
Canada Mining Operations · ATEX and IECEx
ATEX and IECEx Mobile Phone in Canada Mining Operations
A regional grouping rather than one site: Canada is a major producer of nickel, copper, potash and uranium, and the Sudbury Basin in Ontario is one of the world's largest nickel and copper ore suppliers. Underground workings, processing plants and fuel and explosives stores are the typical classified or controlled areas. If you are specifying an ATEX and IECEx mobile phone for Canadian mining regions, this page covers the markings, the approvals and the current certification status of the IS-04Z1.
Pre-launch · certification in progress · Launching Q4 2026
Marking targetEx ib IIC T4Intrinsic safety, Zone 1 / 21 design target · certification in progress
AvailabilityQ4 2026via authorised distributors
Search topicATEX and IECEx
DeviceMobile Phone
RouteSpecification
WhereCanada Mining Operations
Short answer. The SAMS IS-04Z1 is the intrinsically safe smartphone covered here for Canadian mining regions: pre-launch, designed for Zone 1 and Zone 21 (marking target Ex ib IIC T4), with certification in progress and no certificate issued.
Where things stand: the IS-04Z1 has not launched, and none of its four certification routes has produced a certificate yet. A buyer's engineering review is separate from the certificate. Certification status. Place facts reviewed October 2026.
At a glance · ATEX and IECEx
Checklist: ATEX and IECEx mobile phone for Canadian mining regions
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Marking | II 2 G Ex ib IIC T4 on the rating plate | Design target; not yet marked |
| EU-type examination certificate | Notified body number and certificate ID | In progress with TÜV; not issued |
| IECEx certificate of conformity | Number listed on the IECEx online register | In progress; not issued |
| Where it applies | Canadian mining regions: Underground mine workings, Ore processing plants, Fuel storage | Classified by the site operator |
Product · Canada Mining Operations
The product behind this search: the SAMS IS-04Z1.
SAMS IS-04Z1
An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Canada Mining Operations. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
- IP68 sealed
- 4,000 mAh battery
- 50 MP camera
- Android 16
- Zone 1 / Zone 21 design target
The site · Canadian mining regions
Working in Canadian mining regions: operators and classified areas
The companies on site and the hazardous-area types a handset is likely to meet there.
Operators and companies on site
- Vale (Sudbury Basin)
Classified areas to expect
- Underground mine workings
- Ore processing plants
- Fuel storage
- Explosives storage
Local conditions · Canadian mining regions
Site conditions at Canadian mining regions: what wears and what limits equipment
Underground access
Equipment taken underground generally has to suit the mine's hazard classification and may need approval by the mine's own electrical or safety department.
Field notes · Canadian mining regions
More about Canadian mining regions that matters for portable equipment
Canadian mining regions: industry on the ground
Saskatchewan alone produces about 15 percent of the world's uranium, and hard-rock underground mining has long driven development in northern Canada.
Canadian mining regions: who works there
Over half of the world's publicly listed exploration and mining companies were headquartered in Canada in 2013, and Toronto handles about 80 percent of global mining equity trades.
Canadian mining regions: rules and approvals
Underground diesel engines must have exhaust sampled at least monthly, and an engine is removed from service if exhaust carbon monoxide exceeds 2,000 ppm, a reminder of how closely air quality is controlled in coal mines.
Canadian mining regions: projects and investment
Mining contributed about 7.9 percent of Canada's GDP in 2021, roughly 156.5 billion Canadian dollars, split across extraction, services and manufacturing.
The term · ATEX and IECEx
What “ATEX and IECEx” means for a smartphone
ATEX is the European legal framework for equipment used in explosive atmospheres (Directive 2014/34/EU). IECEx is the international certification scheme built on the IEC 60079 standards. Buyers outside Europe often ask for both: an IECEx certificate is the technical evidence most national regimes build on, while ATEX is the legal route into the European market.
For the IS-04Z1 both routes are in progress with TÜV in Germany and neither certificate has been issued. The marking target is II 2 G Ex ib IIC T4: equipment Group II (surface industry), Category 2 (Zone 1 gas), protection concept ib (intrinsic safety), gas group IIC and temperature class T4.
In Canadian mining regions. A mine safety reviewer would expect to see certificate evidence that suits the underground hazard classification, together with the mine's own approval. A dual ATEX and IECEx route, once issued, may help contractors and equipment suppliers who work across several mining regions. The IS-04Z1 has no certificate yet, so certification is a target, not a claim.
The route · specification
Specifying an ATEX and IECEx mobile phone for Canada Mining Operations
A short checklist for anyone writing or reviewing the specification, with the IS-04Z1 status against each point.
Check on the paper
- Marking
- Equipment group, category, protection concept, gas group and temperature class, matched to the area drawing.
- Certificate and schedule
- A certificate number, issuing body and the schedule of conditions, not a brochure claim.
- Standards edition
- The IEC 60079 or national standard edition the certificate was issued against.
Check for the IS-04Z1
- Marking target
- II 2 G Ex ib IIC T4: a target, not yet a certificate.
- Certificate status
- IECEx, ATEX, UKEX and NEC 500 in progress; none issued.
- Operator approval
- Separate from the certificate and handled with the site operator.
Questions · Canada Mining Operations
Frequently asked questions
Can we buy an ATEX and IECEx mobile phone in Canada Mining Operations today?
Not today. Until the certificates are issued the IS-04Z1 stays out of classified areas, and until launch there is nothing to purchase. You can ask for the datasheet and the certification schedule, or book a safe-area evaluation unit.
What does an ATEX and IECEx mobile phone in Canada Mining Operations cost?
No price is published. While certification is in progress there is no list price and no committed lead time, and a supplier quoting a firm figure for an uncertified Ex handset is promising something it cannot stand behind. Indicative pre-launch pricing is issued in writing against a stated quantity and site.
Is the IS-04Z1 ATEX and IECEx certified?
Not yet. Both routes are in progress with TÜV in Germany and no certificate has been issued. Any listing that says otherwise is wrong.
Which areas at Canadian mining regions would use it?
Likely candidates are underground mine workings, ore processing plants, fuel storage, explosives storage. Which areas are classified, and to what zone, is set by the site operator's own area classification drawings.
Is intrinsically safe the same as explosion proof?
Not exactly. Explosion proof is a broad everyday term; intrinsic safety is one protection concept, which limits energy so ignition cannot occur. Flameproof (Ex d) is a different concept that contains an explosion. The IS-04Z1 is intrinsically safe by design.
Who regulates mine safety in Canada?
Mining is mostly provincial, so each province enforces its own occupational health and safety rules; federal regulations such as the coal mining ones apply to federal jurisdictions. Confirm which authority and which Ex marking scheme the mine accepts.
Which Canadian mines have gas hazards requiring Ex equipment?
Underground coal mines are the clearest case because methane is a flammable gas. Some hard-rock operations have fuel stores, explosives areas or battery charging bays that are classified, so confirm with the mine's hazard assessment which areas need certified devices.
Who regulates equipment in a Canadian mine?
Mine safety is regulated province by province. Ontario, for example, has Regulation 854 (Mines and Mining Plants) under the Occupational Health and Safety Act, with a part on electrical equipment. Other provinces have their own rules, and each mine may add requirements. Check the applicable provincial regulation and the operator's procedure.
Related guides
Keep exploring
Other guides for Canada Mining Operations, other places in Canada, and the pages behind them.
Industrial Mobile Phone in Canada Mining OperationsSame place, different guide
Rugged Mobile Phone Distributor in Canada Mining OperationsSame place, different guide
Intrinsically Safe Mobile Phone in Canada Mining OperationsSame place, different guide
IECEx Mobile Phone in Canada Mining OperationsSame place, different guide
Explosion-Proof Mobile Phone in Canada Mining OperationsSame place, different guide
Ex-Proof Mobile Phone in Canada Mining OperationsSame place, different guide
ATEX and IECEx Mobile Phone Distributor in Canada Oil SandsElsewhere in Canada
ATEX and IECEx Mobile Phone Distributor in Saint John RefineryElsewhere in Canada
ATEX and IECEx Mobile Phone Distributor in LloydminsterElsewhere in Canada
ATEX and IECEx Mobile Phone Distributor in Fort McMurrayElsewhere in Canada
Canada market guideCertification route and regulators
All guides for CanadaEvery route we cover
Certification statusWhat is in progress
Enquiry · Canadian mining regions
Ask about the IS-04Z1 for Canadian mining regions, Canada
Send the site, zone and gas group and roughly how many handsets. We reply by email with the datasheet and the certification schedule.
Enquiry · Canadian mining regions
Launching Q4 2026
Planning for Canada Mining Operations?
Name the site and the operator and we will send what is available before launch.