Skip to content
Certification In Progress · Launching Q4 2026 Become a Distributor
Certification In Progress · Launching Q4 2026 Product Certifications Industries Blog About Contact Become a Distributor
Sweden · Mining, Steel and Hydrogen

Explosion proof mobile phone for Mining, Steel and Hydrogen in Sweden

Sweden's iron ore comes from Norrbotten, its steel from Luleå, Oxelösund and Borlänge, and a growing share of new investment is going into hydrogen. This page is for engineers and HSE staff across that chain who need an explosion proof mobile phone in Sweden for Zone 1 gas and Zone 21 dust areas. The IS-04Z1 is designed for both and is still pre-launch, with ATEX certification in progress. The IS-04Z1 is designed around intrinsic safety rather than a flameproof enclosure.

Launching Q4 2026 · certification programme in progress

SAMS IS-04Z1 explosion proof mobile phone, front view
Local approvalATEXATEX 2014/34/EU · ELSÄK-FS 2016:2 and AFS 2023:7 · in progress
AvailabilityQ4 2026via authorised distributors
The sector · Norrbotten to the Baltic

Mining, steel and hydrogen: where Sweden classifies areas

This sector is hard to classify as a whole because the risk is not spread evenly. A mine is mostly a mining-safety problem with a few classified spots. A steelworks is a large gas network with dust. A hydrogen project is a small, new area with the most demanding gas group. The common thread is that each of them is changing: LKAB is moving from pellets towards hydrogen-reduced sponge iron, SSAB is replacing blast furnaces with electric arc furnaces, and new projects at Boden and Luleå are bringing hydrogen to sites that never had it. A handset bought for today's classification drawings should still be correct when those drawings are redrawn. See the operator pages for an explosion proof phone for LKAB and an explosion proof phone for SSAB.

Operators and projects

LKAB
Iron ore mining and pelletising at Kiruna, Malmberget and Svappavaara.
SSAB
Steelmaking at Luleå and Oxelösund, and finishing at Borlänge.
Boliden
Metal mining and smelting, including Aitik at Gällivare and the Rönnskär smelter at Skellefteå.
HYBRIT
Joint development by SSAB, LKAB and Vattenfall, with a pilot at Luleå.
Stegra at Boden
A hydrogen-based steel project in Norrbotten, announced as under development.
Specialty steel
Smaller steelworks in central Sweden, with their own gas and furnace areas.

Classified conditions by site type

Underground mines
Governed by the mining rules; sulphide ore dust is a hazard at some metal mines.
Pellet and sintering plants
Fuel gas, oil and bio-oil systems in the furnaces.
Blast furnaces and coke ovens
Toxic and flammable process gas with hydrogen content.
Smelters
Reducing atmospheres, sulphur compounds and fuel systems.
Electrolysers and storage
Hydrogen at pressure, group IIC, in new installations.
Built for local conditions

What this sector asks of a single handset

Contractors and rotating crews move between sites in this sector, and the same person may work at an ore concentrator in the morning and a gas main in the afternoon.

IP ratingIP68
Battery4,000 mAh
Camera50 MP
OSAndroid 16

Gas and dust in one footprint

Zone 1 sits beside Zone 21 in a steelworks and a pellet plant. One handset designed for both avoids issuing a second device for the dust area.

Group IIC for the transition

Hydrogen is group IIC. Specifying IIC at the outset avoids replacement when an electrolyser or hydrogen line is added to a site classified for lower groups.

Cold, remote and spread out

Norrbotten sites have long winters and long distances. rugged build covers low temperature, and the 4,000 mAh battery is sized for a shift away from a charger.

Portable credentials, managed centrally

Android Enterprise and the existing MDM console let a contractor pool be enrolled and wiped by operator, so a handset can travel between sites without carrying one operator's data into another.

Use cases · Mining, steel and hydrogen

Where the IS-04Z1 explosion proof mobile phone goes to work.

Mining01

Surface plant and fuel handling

Pellet plant outages, fuel stores and crusher areas bring contractors into zones where the phone is the only way to report or sign off.

Steel02

Gas networks and furnace outages

Outage work on a gas main or furnace is documented with photographs and permits on an enrolled device, rather than a paper pack carried into the area.

Hydrogen03

Commissioning of new plants

Commissioning teams from several contractors work on the same unit. A managed Zone 1 handset keeps the record in one place and can be reissued when the shift changes.

Work and approval

Contractors, project sites and the approval step

Work in this sector comes in waves: construction of new capacity, then commissioning, then long periods of operation with periodic outages. Contractors move between operators during each wave. For a safety manager the useful question is whether the same device and the same enrolment route work at every site, not whether each site buys its own.

Operators set their own requirements for equipment suppliers and this page does not claim any relationship with any of them. Ask each operator's procurement and HSE teams what a supplier file needs. The IS-04Z1 certificates have not been issued yet.

Questions · Mining, steel and hydrogen

Frequently asked questions

Which Swedish rules govern equipment in mines and steelworks?

ATEX 2014/34/EU covers the equipment through ELSÄK-FS 2016:2 for electrical products. Underground work adds the mining inspectorate. See the Sweden page for the regulatory route.

Can one handset cover both a mine surface plant and a hydrogen plant?

That is the design aim. The target of Zone 1 and Zone 21 with group IIC covers both, but the classification drawing for each location decides, so send us the zone, group and temperature class.

How is a contractor pool managed across operators?

Through the MDM console. The handset is enrolled, restricted to approved applications and wiped at the end of the contract, so one pool of devices serves several sites.

Enquiry · Mining, Steel and Hydrogen

Ask about the IS-04Z1 for Mining, Steel and Hydrogen, Sweden

Tell us the site, the zone and gas group, and roughly how many handsets. The SAMS team replies by email with the datasheet and the certification schedule for Sweden. The IS-04Z1 is pre-launch and certification is in progress, so there is no list price yet; indicative pricing is issued in writing against a stated quantity and site.

Enquiry · Mining, Steel and Hydrogen

Please enter your name.
Please enter your company name.
Enter a valid email address.
Please enter a valid phone number.
Please enter your target market.
Please select one.

Launching Q4 2026

Evaluating the IS-04Z1 for this site?

Tell us the zone, gas group and operator. We will send the datasheet and the certification schedule for your market.