Borouge: people and language
Borouge was reported to have a workforce of more than 3,100 people, so the Ruwais plants run as a staffed industrial site with its own induction and permit practice.
Borouge is a polyolefins producer making polyethylene and polypropylene at Ruwais, founded in 1998 through a partnership between ADNOC and Borealis. Upon expansion Borouge was expected to be the largest single-site polyolefin complex in the world, supplying feedstock to the nearby TA'ZIZ Industrial Chemicals Zone. This page sets out how an intrinsically safe smartphone supply route to Borouge will work for the IS-04Z1, and what is and is not available before launch.
Pre-launch · certification in progress · Launching Q4 2026
Short answer. An intrinsically safe smartphone for Borouge cannot be bought yet: the SAMS IS-04Z1 is pre-launch (certification in progress, no certificate issued), and the datasheet, certification schedule and safe-area evaluation units are available now.
Current position: certification in progress, nothing issued, launch targeted for Q4 2026. An operator's own vendor approval is a separate step. Certification status. Place facts reviewed October 2026.
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Level of protection | ia, ib or ic matched to the zone | ib, for Zone 1 |
| Entity parameters | Uo, Io and Po within the device limits | Published with the certificate |
| Accessories | Chargers and cases certified with the device | Defined at certification |
| Where it applies | Borouge: Polyethylene and polypropylene plants, Cross-linked polyethylene (XLPE) plant, Polymer powder and pellet handling | Classified by the site operator |

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in United Arab Emirates. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
A short profile of its operations and the kinds of classified area that matter for portable equipment.
Borouge's e-procurement page directs suppliers to register on the ADNOC Commercial Directory (not applicable in Asia Pacific, where the local Borouge office is the contact); confirm current requirements with its procurement and HSE teams. The Ex certificate and an organisation's own vendor or engineering approval are two separate timelines; SAMS is working towards both and holds neither today.
Borouge was reported to have a workforce of more than 3,100 people, so the Ruwais plants run as a staffed industrial site with its own induction and permit practice.
In September 2026 the new XLPE plant at Ruwais delivered its first customer batch after performance testing, adding 100,000 tonnes a year and doubling the group's XLPE output in the region.
Borouge 4 includes a 1.5 million tonne ethane cracker, two Borstar polyethylene plants and a cross-linked polyethylene plant, so ethane and ethylene handling is central to the new units.
The business has two parts: Abu Dhabi Polymers Company, the production company in Abu Dhabi, and Borouge Pte Ltd, which is based in Singapore.
Intrinsic safety limits the electrical and thermal energy in a circuit so that neither a spark nor a hot surface can ignite a gas or dust atmosphere, even when a fault occurs. The ib level, used for Zone 1, tolerates one fault. It is the usual way to make a handheld device that a worker carries continuously through a hazardous area.
The IS-04Z1 is designed on this principle for Zone 1 and Zone 21 (marking target II 2 G Ex ib IIC T4). Intrinsic safety is a design basis, not a certificate: certification is in progress and none has been issued yet.
In Borouge. Rounds across an ethane cracker, polymer plants and chemical storage and loading involve gauge readings, checks and loading-area inspections. A handheld designed for intrinsic safety could capture readings, photos and calls in classified spots if its certificate allows. Permit rules at Ruwais belong to Borouge.
Supply of the IS-04Z1 to Borouge starts only after certification, through authorised distributors. Until then a buyer can request the datasheet and the written certification schedule, and arrange a safe-area evaluation unit, which puts the site on the list for the right local channel at launch.
The technical specification, marking target and conditions of use, sent by email.
Which certificates are in progress, in what order, and what is still to be confirmed.
Evaluation units can be used for connectivity, MDM enrolment and workflow testing outside classified areas.
Tell us the site, zone, gas group and quantity so the right authorised distributor can contact you.
Not yet. The IS-04Z1 is pre-launch and its certification is still in progress ahead of a Q4 2026 launch. No unit goes into a classified area before the certificate covering it exists. The datasheet, the certification schedule and safe-area evaluation units are available now.
No price is published. While certification is in progress there is no list price and no committed lead time, and a supplier quoting a firm figure for an uncertified Ex handset is promising something it cannot stand behind. Indicative pre-launch pricing is issued in writing against a stated quantity and site.
The circuits are designed to limit energy so a spark or hot surface cannot ignite a gas or dust atmosphere, even with one fault (level ib, Zone 1). Certification of that design is in progress.
Borouge's e-procurement page directs suppliers to register on the ADNOC Commercial Directory (not applicable in Asia Pacific, where the local Borouge office is the contact); confirm current requirements with its procurement and HSE teams.
Through authorised distributors once certificates exist. Until then SAMS can send the datasheet and certification schedule and arrange safe-area evaluation units.
Ethane cracker and polyethylene and polypropylene units typically have flammable gas zones around reactors, compressors and storage, and powder and pellet handling brings combustible dust zones. Borouge classifies each unit, so ask for the area drawing, gas and dust group and temperature class.
Since 31 March 2026 Borouge Plc has been part of Borouge Group International AG, formed from Borouge, Borealis and NOVA Chemicals. Supplier registration may now follow group processes, so confirm current requirements with Borouge procurement and HSE before assuming older procedures still apply.
The sheet's start-up status for Borouge 4 comes only from a search snippet, so it should not be assumed. It describes the Ruwais complex as being expanded with a new ethane cracker and polyethylene plants. Confirm current status with Borouge. The IS-04Z1 is pre-launch with no certificate.
More on Borouge, and on other places in United Arab Emirates.
Tell us what you need to equip and where. The SAMS team answers by email with the datasheet and where each certification route stands.
Tell us the zone, gas group and operator. We will send the datasheet and the certification schedule.