Skip to content
Certification In Progress · Launching Q4 2026 Become a Distributor
Certification In Progress · Launching Q4 2026 Product Certifications Industries Blog About Contact Become a Distributor
Borouge · explosion proof

Explosion-Proof Mobile Phone for Borouge

Borouge is a polyolefins producer making polyethylene and polypropylene at Ruwais, founded in 1998 through a partnership between ADNOC and Borealis. The business has two parts: Abu Dhabi Polymers Company, the production company in Abu Dhabi, and Borouge Pte Ltd, which is based in Singapore. If you are specifying an explosion proof mobile phone for Borouge, this page covers the markings, the approvals and the current certification status of the IS-04Z1.

Pre-launch · certification in progress · Launching Q4 2026

SAMS IS-04Z1 intrinsically safe smartphone for Borouge, front view
Marking targetEx ib IIC T4Intrinsic safety, Zone 1 / 21 design target · certification in progress
AvailabilityQ4 2026via authorised distributors
Search topicexplosion proof
DeviceMobile Phone
RouteSpecification
WhereBorouge

Short answer. The SAMS IS-04Z1 is the intrinsically safe smartphone covered here for Borouge: pre-launch, designed for Zone 1 and Zone 21 (marking target Ex ib IIC T4), with certification in progress and no certificate issued.

Where things stand: the IS-04Z1 has not launched, and none of its four certification routes has produced a certificate yet. Operator approval runs on its own timeline. Certification status. Place facts reviewed October 2026.

At a glance · explosion proof

Checklist: explosion proof mobile phone for Borouge

What to check, and where the IS-04Z1 stands today
CheckWhat to look forIS-04Z1 today
Protection conceptFlameproof (Ex d) or intrinsic safety (Ex i)Intrinsic safety, level ib
Zone suitabilityZone 1 gas and Zone 21 dustDesign target for Zone 1 and 21
CertificateNumber, issuing body and schedule of conditionsIn progress; not issued
Where it appliesBorouge: Polyethylene and polypropylene plants, Cross-linked polyethylene (XLPE) plant, Polymer powder and pellet handlingClassified by the site operator
Product · United Arab Emirates

The product behind this search: the SAMS IS-04Z1.

SAMS IS-04Z1 explosion proof mobile phone, front view

SAMS IS-04Z1

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in United Arab Emirates. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.

  • IP68 sealed
  • 4,000 mAh battery
  • 50 MP camera
  • Android 16
  • Zone 1 / Zone 21 design target
The organisation · Borouge

Borouge Plc (part of Borouge Group International AG): operations and where an Ex phone fits

A short profile of its operations and the kinds of classified area that matter for portable equipment.

Sites and areas

  • Ruwais

Classified areas

  • Polyethylene and polypropylene plants
  • Cross-linked polyethylene (XLPE) plant
  • Polymer powder and pellet handling
Supplier approval · Borouge

Becoming an approved supplier to Borouge

Borouge's e-procurement page directs suppliers to register on the ADNOC Commercial Directory (not applicable in Asia Pacific, where the local Borouge office is the contact); confirm current requirements with its procurement and HSE teams. The Ex certificate and an organisation's own vendor or engineering approval are two separate timelines; SAMS is working towards both and holds neither today.

Field notes · Borouge

More about Borouge that matters for portable equipment

Borouge: infrastructure

Borouge 4 includes a 1.5 million tonne ethane cracker, two Borstar polyethylene plants and a cross-linked polyethylene plant, so ethane and ethylene handling is central to the new units.

Borouge: industry on the ground

Upon expansion Borouge was expected to be the largest single-site polyolefin complex in the world, supplying feedstock to the nearby TA'ZIZ Industrial Chemicals Zone.

Borouge: projects and investment

The Borouge 4 expansion at Ruwais, agreed in 2021 for about 6.2 billion US dollars, was designed to add 1.4 million tonnes a year of polyethylene.

Borouge: who works there

In March 2025 ADNOC and OMV announced the merger of Borouge with Borealis and the acquisition of NOVA Chemicals, creating a polyolefins group ranked fourth in the world by capacity.

The term · explosion proof

What “explosion proof” means for a smartphone

“Explosion proof” is the phrase most buyers use for equipment that may be taken into a classified hazardous area. Strictly, it covers several protection concepts: a flameproof enclosure (Ex d) contains an internal explosion, while intrinsic safety (Ex i) limits electrical energy so that an ignition cannot start. Phones are normally intrinsically safe, because a flameproof handset would be too heavy to carry all shift.

The IS-04Z1 uses intrinsic safety, with a marking target of Ex ib IIC T4, and is designed for Zone 1 and Zone 21. It is pre-launch, certification is in progress and no certificate has been issued.

In Borouge. An ethane cracker and polyethylene and polypropylene plants show how explosion-proof covers different concepts. Flameproof Ex d protects fixed equipment, while intrinsic safety suits handheld devices. A phone relies on the second, and the target marking is II 2 G Ex ib IIC T4, subject to certification.

The route · specification

Specifying an explosion proof mobile phone for Borouge

A short checklist for anyone writing or reviewing the specification, with the IS-04Z1 status against each point.

Check on the paper

Marking
Equipment group, category, protection concept, gas group and temperature class, matched to the area drawing.
Certificate and schedule
A certificate number, issuing body and the schedule of conditions, not a brochure claim.
Standards edition
The IEC 60079 or national standard edition the certificate was issued against.

Check for the IS-04Z1

Marking target
II 2 G Ex ib IIC T4: a target, not yet a certificate.
Certificate status
IECEx, ATEX, UKEX and NEC 500 in progress; none issued.
Operator approval
Separate from the certificate and handled with the site operator.
Questions · Borouge

Frequently asked questions

Can Borouge buy the IS-04Z1 today?

No. Nothing can be bought or taken into a classified area today: certification is in progress and launch is planned for Q4 2026. What is available now is the datasheet, the written certification schedule and evaluation units for safe-area use.

What does an explosion proof mobile phone for Borouge cost?

No price is published. While certification is in progress there is no list price and no committed lead time, and a supplier quoting a firm figure for an uncertified Ex handset is promising something it cannot stand behind. Indicative pre-launch pricing is issued in writing against a stated quantity and site.

Is the IS-04Z1 explosion proof or intrinsically safe?

It is intrinsically safe (marking target Ex ib IIC T4), which is the usual way to make a phone for hazardous areas. It is not a flameproof (Ex d) design, and certification is still in progress.

How does Borouge approve suppliers?

Borouge's e-procurement page directs suppliers to register on the ADNOC Commercial Directory (not applicable in Asia Pacific, where the local Borouge office is the contact); confirm current requirements with its procurement and HSE teams.

Is intrinsically safe the same as explosion proof?

Not exactly. Explosion proof is a broad everyday term; intrinsic safety is one protection concept, which limits energy so ignition cannot occur. Flameproof (Ex d) is a different concept that contains an explosion. The IS-04Z1 is intrinsically safe by design.

What should be considered for devices at Ruwais in summer?

Ruwais is a coastal desert location with high heat, humidity and salt, plus dust from pellet and powder handling. Check the operating temperature range, ingress protection and corrosion resistance of the enclosure, and confirm any area-specific limits with the operator before deploying equipment.

Do contractors at Ruwais follow Borouge rules or ADNOC rules?

Ruwais is a shared industrial complex with several operators, and each company controls access and equipment rules inside its own plants. Check which entity operates the unit, because induction, hot-work permits and device approvals are set by that operator and not by the neighbouring facilities.

Where should suppliers register to work with Borouge?

The sheet says Borouge points suppliers to the ADNOC Commercial Directory e-procurement page for registration. Requirements may change, and corporate structure changes were noted in 2026, so confirm with Borouge's procurement and HSE teams. The IS-04Z1 has no certificate yet.

Enquiry · Borouge

Ask about the IS-04Z1 for Borouge, United Arab Emirates

Share the site details and quantity. You will get the datasheet and the certification schedule back by email; pricing is indicative only until launch.

Enquiry · Borouge

Please enter your name.
Please enter your company name.
Enter a valid email address.
Please enter your target market.
Please select one.

Launching Q4 2026

Planning for Borouge?

Send the zone and gas group of your site and we will reply with the datasheet and schedule.