Seatrium sites
Its official contact page lists Admiralty Yard, Benoi Yard, Pioneer Yard, Tuas Yard and Tuas Boulevard Yard in Singapore.
Singapore's major shipyards are run by Seatrium, with yards at Admiralty, Benoi, Pioneer, Tuas and Tuas Boulevard, and by ST Engineering. In 2002 Keppel Shipyard was combined with Keppel FELS and Keppel Singmarine to form the Keppel Offshore and Marine group, which became part of Seatrium in 2023. An intrinsically safe smartphone distributor in Singapore shipyards would carry the IS-04Z1 to these buyers once certification completes.
Pre-launch · certification in progress · Launching Q4 2026
Short answer. Singapore shipyards has no appointed SAMS distributor yet: the IS-04Z1 is pre-launch (certification in progress, no certificate issued, launch planned for Q4 2026), and distributor applications are open.
Where things stand: the IS-04Z1 has not launched, and none of its four certification routes has produced a certificate yet. Operator approval runs on its own timeline. Certification status. Place facts reviewed October 2026.
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Level of protection | ia, ib or ic matched to the zone | ib, for Zone 1 |
| Entity parameters | Uo, Io and Po within the device limits | Published with the certificate |
| Accessories | Chargers and cases certified with the device | Defined at certification |
| Where it applies | Singapore shipyards: Paint and coating shops, Offshore conversion, Vessel tank spaces | Classified by the site operator |

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Singapore Shipyard. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
The companies on site and the hazardous-area types a handset is likely to meet there.
Its official contact page lists Admiralty Yard, Benoi Yard, Pioneer Yard, Tuas Yard and Tuas Boulevard Yard in Singapore.
ST Engineering acquired the Gul yard in 2023 for ship repair, and keeps its Benoi yard mainly for shipbuilding.
Heat, humidity and frequent heavy showers affect work on open decks, quays and docks all year round.
Seatrium's repair and upgrade work covers LNG and LPG carriers, cruise ships, ferries, floating production vessels, jack-ups, tankers, container ships and heavy-lift vessels.
The Tuas Boulevard Yard has a graving dock about 350 metres long and 66 metres wide, suited to the largest tankers and floating production units.
Seatrium lists its Singapore yards at Admiralty Road West, 15 Benoi Road, 50 Gul Road, 51 Pioneer Sector 1 and 80 Tuas South Boulevard, each with its own gate and switchboard.
Intrinsic safety limits the electrical and thermal energy in a circuit so that neither a spark nor a hot surface can ignite a gas or dust atmosphere, even when a fault occurs. The ib level, used for Zone 1, tolerates one fault. It is the usual way to make a handheld device that a worker carries continuously through a hazardous area.
The IS-04Z1 is designed on this principle for Zone 1 and Zone 21 (marking target II 2 G Ex ib IIC T4). Intrinsic safety is a design basis, not a certificate: certification is in progress and none has been issued yet.
In Singapore shipyards. Tank entry follows per-vessel gas-free and permit procedures, so supervisors spend time moving between tanks, dry dock and workshops with checklists and photographs. A handheld intrinsically safe phone is intended for that routine once certified, within the yard's permit rules. Certification is still in progress.
SAMS is appointing authorised distributors ahead of the Q4 2026 launch. No territory has been granted for Singapore shipyards yet and applications are reviewed company by company. Because a certified Ex device cannot be opened by an ordinary phone workshop without invalidating its certificate, SAMS looks for partners who can provide competent technical support and after-sales service locally.
Not yet. The IS-04Z1 is pre-launch and its certification is still in progress ahead of a Q4 2026 launch. No unit goes into a classified area before the certificate covering it exists. The datasheet, the certification schedule and safe-area evaluation units are available now.
There is no list price yet. SAMS gives indicative pre-launch pricing in writing, against a stated quantity and site, and does not commit to a lead time before certification completes.
The circuits are designed to limit energy so a spark or hot surface cannot ignite a gas or dust atmosphere, even with one fault (level ib, Zone 1). Certification of that design is in progress.
Likely candidates are vessel tank spaces, dry dock and repair work, paint and coating shops, offshore conversion. Which areas are classified, and to what zone, is set by the site operator's own area classification drawings.
Apply through the distributor page with your company details and the territory you cover. SAMS reviews applications company by company and has not yet granted a territory for Singapore shipyards.
No. Zones depend on the vessel, its last cargo, gas-freeing status and the work permit in force, and they can change within a day. Always check the permit and the gas-free certificate before using a portable device in a tank or enclosed space.
Singapore's constant heat and humidity, plus frequent heavy showers, stress seals, screens and batteries. Choose devices with suitable ingress protection and keep a routine for drying, charging and storing them outside classified areas.
No. Seatrium runs most major yards, but there are also smaller yards in Jurong that have not been verified here. Each sets its own device rules. Confirm requirements with the yard safety department concerned.
More on Singapore Shipyard, and on other places in Singapore.
Send the site, zone and gas group and roughly how many handsets. We reply by email with the datasheet and the certification schedule.
Send the zone and gas group of your site and we will reply with the datasheet and schedule.