Nickel hubs
The Indonesia Morowali Industrial Park, begun in 2013 in Central Sulawesi, is reported to be the largest nickel-based industrial area, with 11 smelters.
Indonesia Mining · intrinsically safe
Intrinsically Safe Smartphone Distributor in Indonesia Mining
Indonesian mining includes coal in Kalimantan, nickel in Sulawesi and the Grasberg copper-gold complex in Papua. Nickel laterite is processed in Indonesia by methods including high-pressure acid leaching, which brings pressurised acid and chemical handling areas into mine-site processing plants. An intrinsically safe smartphone distributor in Indonesian mining regions would carry the IS-04Z1 to these buyers once certification completes.
Pre-launch · certification in progress · Launching Q4 2026
Marking targetEx ib IIC T4Intrinsic safety, Zone 1 / 21 design target · certification in progress
AvailabilityQ4 2026via authorised distributors
Search topicintrinsically safe
DeviceSmartphone
RouteDistribution
WhereIndonesia Mining
Short answer. Indonesian mining regions has no appointed SAMS distributor yet: the IS-04Z1 is pre-launch (certification in progress, no certificate issued, launch planned for Q4 2026), and distributor applications are open.
Status: pre-launch. IECEx, ATEX, UKEX and NEC 500 certification is in progress and no certificate has been issued; launch is planned for Q4 2026. A buyer's engineering review is separate from the certificate. Certification status. Place facts reviewed October 2026.
At a glance · intrinsically safe
Checklist: intrinsically safe smartphone for Indonesian mining regions
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Level of protection | ia, ib or ic matched to the zone | ib, for Zone 1 |
| Entity parameters | Uo, Io and Po within the device limits | Published with the certificate |
| Accessories | Chargers and cases certified with the device | Defined at certification |
| Where it applies | Indonesian mining regions: Underground mine areas, Smelter and process plant areas, Coal handling and preparation plants (dust, Zone 21) | Classified by the site operator |
Product · Indonesia Mining
The product behind this search: the SAMS IS-04Z1.
SAMS IS-04Z1
An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Indonesia Mining. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
- IP68 sealed
- 4,000 mAh battery
- 50 MP camera
- Android 16
- Zone 1 / Zone 21 design target
The site · Indonesian mining regions
Indonesian mining regions at a glance: who is there, what is classified
A short profile of the site and the kinds of classified area that matter for portable equipment.
Operators and companies on site
- PT Freeport Indonesia (Grasberg)
- Kaltim Prima Coal (Sangatta)
- Adaro Indonesia (Tutupan)
- Vale Indonesia (Sorowako)
Classified areas to expect
- Coal handling and preparation plants (dust, Zone 21)
- Fuel and lubricant storage
- Underground mine areas
- Smelter and process plant areas
Local conditions · Indonesian mining regions
Site conditions at Indonesian mining regions: what wears and what limits equipment
Climate
Hot, wet tropical conditions at lowland sites; cooler and very wet in the Papua highlands.
Field notes · Indonesian mining regions
More about Indonesian mining regions that matters for portable equipment
Indonesian mining regions: projects and investment
PT Borneo Alumina Indonesia finished an alumina refinery in West Kalimantan with a capacity of 1 million tonnes a year, starting operations in December 2024, and Freeport built a 0.6 million tonne copper smelter at Manyar in East Java.
Indonesian mining regions: infrastructure
Nickel output reached about 2.2 million tonnes in 2023 and relies heavily on coal-fired power, accounting for around 22 percent of national energy and industrial emissions, so captive coal power plants sit beside many smelters.
Indonesian mining regions: infrastructure
The Indonesia Morowali Industrial Park in Central Sulawesi, the country's largest nickel processing site, covers 2,000 hectares and is served by its own seaport, an airport and a 2 GW coal power plant.
Indonesian mining regions: industry on the ground
In 2024 Indonesia was estimated to be the world's leading producer of mined nickel at 62 percent of global output, and second for tin at 19 percent and cobalt at 12 percent.
The term · intrinsically safe
What “intrinsically safe” means for a smartphone
Intrinsic safety limits the electrical and thermal energy in a circuit so that neither a spark nor a hot surface can ignite a gas or dust atmosphere, even when a fault occurs. The ib level, used for Zone 1, tolerates one fault. It is the usual way to make a handheld device that a worker carries continuously through a hazardous area.
The IS-04Z1 is designed on this principle for Zone 1 and Zone 21 (marking target II 2 G Ex ib IIC T4). Intrinsic safety is a design basis, not a certificate: certification is in progress and none has been issued yet.
In Indonesian mining regions. Mine inspections, fuel storage checks and plant rounds are spread over large, remote sites. A handheld designed for intrinsically safe use could keep checklists and photos on one device, but only where its gas marking suits the area. Underground and dust areas need separate assessment.
The route · distribution
Distributing the IS-04Z1 in Indonesia Mining
SAMS is appointing authorised distributors ahead of the Q4 2026 launch. No territory has been granted for Indonesian mining regions yet and applications are reviewed company by company. Because a certified Ex device cannot be opened by an ordinary phone workshop without invalidating its certificate, SAMS looks for partners who can provide competent technical support and after-sales service locally.
What SAMS looks for in a partner
- Operator relationships
- Existing supplier registrations or a clear route to them with the main operators and contractors in Indonesian mining regions.
- Ex-competent staff
- People who understand zone classification, markings and the conditions of a certificate.
And equally important
- Local-language support
- Documentation, training and helpdesk in the languages the workforce uses.
- Service capability
- Spares, battery replacement and repair routed through SAMS-approved channels.
Questions · Indonesia Mining
Frequently asked questions
Can we buy an intrinsically safe smartphone in Indonesia Mining today?
Not today. Until the certificates are issued the IS-04Z1 stays out of classified areas, and until launch there is nothing to purchase. You can ask for the datasheet and the certification schedule, or book a safe-area evaluation unit.
What does an intrinsically safe smartphone in Indonesia Mining cost?
SAMS has not published a price. Any figure you are offered for an uncertified Ex phone should be treated with caution; written indicative pricing is available for a defined quantity and site.
What does ‘intrinsically safe’ mean for the IS-04Z1?
The circuits are designed to limit energy so a spark or hot surface cannot ignite a gas or dust atmosphere, even with one fault (level ib, Zone 1). Certification of that design is in progress.
Which areas at Indonesian mining regions would use it?
Likely candidates are coal handling and preparation plants (dust, zone 21), fuel and lubricant storage, underground mine areas, smelter and process plant areas. Which areas are classified, and to what zone, is set by the site operator's own area classification drawings.
How do I become a SAMS distributor for Indonesian mining regions?
Apply through the distributor page with your company details and the territory you cover. SAMS reviews applications company by company and has not yet granted a territory for Indonesian mining regions.
Who regulates mining safety and equipment in Indonesia?
Mining activity falls under the Energy and Mineral Resources Ministry, with the Directorate General of Mineral and Coal setting policy under the mining law. Equipment and radio requirements may involve other agencies, so confirm approvals with the operator and your adviser.
How remote are mining sites in Indonesia for supporting equipment?
Many sites are in Kalimantan, Sulawesi or Papua and need sea or air freight plus long road legs. Typically contractors stock spare batteries and chargers on site, and allow longer lead times for repairs and import clearance.
Does the IS-04Z1 target marking cover coal dust areas?
The target marking, II 2 G Ex ib IIC T4, is for gas atmospheres. Coal preparation plants are dust areas, which need a dust marking and separate assessment. Do not assume coverage. Confirm requirements for each area with the mine operator's safety department.
Related guides
Keep exploring
Other guides for Indonesia Mining, other places in Indonesia, and the pages behind them.
Hazardous Area Mobile Phone Distributor in Indonesia MiningSame place, different guide
IECEx Mobile Phone Distributor in Indonesia MiningSame place, different guide
ATEX and IECEx Mobile Phone in Indonesia MiningSame place, different guide
Rugged Mobile Phone in Indonesia MiningSame place, different guide
Ex-Proof Mobile Phone in Indonesia MiningSame place, different guide
Explosion-Proof Mobile Phone in Indonesia MiningSame place, different guide
ATEX and IECEx Mobile Phone Distributor in Pekanbaru Oil FieldElsewhere in Indonesia
ATEX and IECEx Mobile Phone Distributor in BalikpapanElsewhere in Indonesia
ATEX and IECEx Mobile Phone Distributor in Kalimantan MiningElsewhere in Indonesia
ATEX and IECEx Mobile Phone Distributor in Batam ShipyardElsewhere in Indonesia
Indonesia market guideCertification route and regulators
All guides for IndonesiaEvery route we cover
Certification statusWhat is in progress
Enquiry · Indonesian mining regions
Ask about the IS-04Z1 for Indonesian mining regions, Indonesia
Tell us what you need to equip and where. The SAMS team answers by email with the datasheet and where each certification route stands.
Enquiry · Indonesian mining regions
Launching Q4 2026
Planning for Indonesia Mining?
Name the site and the operator and we will send what is available before launch.