Urban shipyard
The 65,000 square metre yard is within the Rio metropolitan area across the bay from downtown.
Niteroi lies across Guanabara Bay from Rio de Janeiro and is mainly a commercial city. The Brasa yard there, a partnership of SBM Offshore and Synergy operating since 2012, integrates FPSO topside modules with hulls for pre-salt service, so shipyard hazardous areas are present. If you are specifying an intrinsically safe mobile phone for Niteroi, this page covers the markings, the approvals and the current certification status of the IS-04Z1.
Pre-launch · certification in progress · Launching Q4 2026
Short answer. The SAMS IS-04Z1 is the intrinsically safe smartphone covered here for Niteroi: pre-launch, designed for Zone 1 and Zone 21 (marking target Ex ib IIC T4), with certification in progress and no certificate issued.
Where things stand: the IS-04Z1 has not launched, and none of its four certification routes has produced a certificate yet. A buyer's engineering review is separate from the certificate. Certification status. Place facts reviewed October 2026.
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Level of protection | ia, ib or ic matched to the zone | ib, for Zone 1 |
| Entity parameters | Uo, Io and Po within the device limits | Published with the certificate |
| Accessories | Chargers and cases certified with the device | Defined at certification |
| Where it applies | Niteroi: FPSO module fabrication and integration, Shipyard tank and hull work, Fuel and gas handling at quaysides | Classified by the site operator |

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Niteroi. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
The companies on site and the hazardous-area types a handset is likely to meet there.
The 65,000 square metre yard is within the Rio metropolitan area across the bay from downtown.
FPSO hulls berth at the yard for integration, for example Cidade de Marica in 2015.
The two power-generation modules for the P-56 platform were built by Rolls-Royce with UTC Engenharia at UTC's site in Niteroi, an example of offshore topside fabrication done in the city.
A 2011 Getulio Vargas Foundation study classed Niteroi as Brazil's richest city by share of high-income households, and it is the second-largest formal employer in Rio de Janeiro state.
The Mauá shipyard grew from a Niterói foundry and shipyard bought in 1846 by Baron of Mauá, and its 2000 joint venture with Jurong Shipyard added construction of oil and gas platforms.
The municipality contains part of the 2,400 hectare Serra da Tiririca State Park, created in 1991, which affects where new industrial or construction projects can be sited.
Intrinsic safety limits the electrical and thermal energy in a circuit so that neither a spark nor a hot surface can ignite a gas or dust atmosphere, even when a fault occurs. The ib level, used for Zone 1, tolerates one fault. It is the usual way to make a handheld device that a worker carries continuously through a hazardous area.
The IS-04Z1 is designed on this principle for Zone 1 and Zone 21 (marking target II 2 G Ex ib IIC T4). Intrinsic safety is a design basis, not a certificate: certification is in progress and none has been issued yet.
In Niteroi. Inspectors and commissioning teams moving across hull, topside modules and the quay can use an intrinsically safe handheld for punch lists, photographs and permits. The IS-04Z1 is designed for such yard rounds, once certification is complete. Tank work needs particular care with any electronic device.
A short checklist for anyone writing or reviewing the specification, with the IS-04Z1 status against each point.
Not today. Until the certificates are issued the IS-04Z1 stays out of classified areas, and until launch there is nothing to purchase. You can ask for the datasheet and the certification schedule, or book a safe-area evaluation unit.
There is no list price yet. SAMS gives indicative pre-launch pricing in writing, against a stated quantity and site, and does not commit to a lead time before certification completes.
The circuits are designed to limit energy so a spark or hot surface cannot ignite a gas or dust atmosphere, even with one fault (level ib, Zone 1). Certification of that design is in progress.
Likely candidates are fpso module fabrication and integration, shipyard tank and hull work, fuel and gas handling at quaysides. Which areas are classified, and to what zone, is set by the site operator's own area classification drawings.
Not exactly. Explosion proof is a broad everyday term; intrinsic safety is one protection concept, which limits energy so ignition cannot occur. Flameproof (Ex d) is a different concept that contains an explosion. The IS-04Z1 is intrinsically safe by design.
Mainly shipyard and fabrication work: platform modules, power packages and vessel outfitting for the Campos and Santos basins. Hazardous areas arise on tanks, engine spaces and process modules, so zone definitions come from the yard's classification plan.
Niteroi faces Rio across Guanabara Bay and is connected by road bridge and ferry, so commuting between yards and Rio offices is common. Ask local logistics staff about peak traffic when scheduling deliveries of equipment.
The sheet notes that the latest sourced integrations are 2014-2015, so current workload is not confirmed. A buyer should ask the yard directly. Confirm approvals and documentation requirements with the site operator before planning a fleet.
More on Niteroi, and on other places in Brazil.
Share the site details and quantity. You will get the datasheet and the certification schedule back by email; pricing is indicative only until launch.
Send the zone and gas group of your site and we will reply with the datasheet and schedule.