Underground access
Equipment taken underground generally has to suit the mine's hazard classification and may need approval by the mine's own electrical or safety department.
Canada Mining Operations · industrial
Industrial Mobile Phone Distributor in Canada Mining Operations
A regional grouping rather than one site: Canada is a major producer of nickel, copper, potash and uranium, and the Sudbury Basin in Ontario is one of the world's largest nickel and copper ore suppliers. Canada was the world's largest potash producer in 2019 and a top-ten producer of gold, nickel, platinum, iron ore, titanium, niobium, sulphur, molybdenum and cobalt. Distribution partners for Canadian mining regions are being identified ahead of the Q4 2026 launch of the IS-04Z1.
Pre-launch · certification in progress · Launching Q4 2026
Marking targetEx ib IIC T4Intrinsic safety, Zone 1 / 21 design target · certification in progress
AvailabilityQ4 2026via authorised distributors
Search topicindustrial
DeviceMobile Phone
RouteDistribution
WhereCanada Mining Operations
Short answer. Canadian mining regions has no appointed SAMS distributor yet: the IS-04Z1 is pre-launch (certification in progress, no certificate issued, launch planned for Q4 2026), and distributor applications are open.
Current position: certification in progress, nothing issued, launch targeted for Q4 2026. An operator's own vendor approval is a separate step. Certification status. Place facts reviewed October 2026.
At a glance · industrial
Checklist: industrial mobile phone for Canadian mining regions
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Ingress protection | IP rating for dust and water | IP68 design |
| Fleet management | EMM and MDM support | Android 16 with EMM and MDM |
| Explosion protection | A separate certificate and marking | In progress; not issued |
| Where it applies | Canadian mining regions: Fuel storage, Explosives storage, Underground mine workings | Classified by the site operator |
Product · Canada Mining Operations
The product behind this search: the SAMS IS-04Z1.
SAMS IS-04Z1
An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Canada Mining Operations. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
- IP68 sealed
- 4,000 mAh battery
- 50 MP camera
- Android 16
- Zone 1 / Zone 21 design target
The site · Canadian mining regions
Canadian mining regions at a glance: who is there, what is classified
A short profile of the site and the kinds of classified area that matter for portable equipment.
Operators and companies on site
- Vale (Sudbury Basin)
Classified areas to expect
- Underground mine workings
- Ore processing plants
- Fuel storage
- Explosives storage
Local conditions · Canadian mining regions
Site conditions at Canadian mining regions: what wears and what limits equipment
Cold-climate working
Winters in much of mining Canada are cold enough that battery performance, glove use on touchscreens and condensation are practical concerns.
Field notes · Canadian mining regions
More about Canadian mining regions that matters for portable equipment
Canadian mining regions: projects and investment
Mining contributed about 7.9 percent of Canada's GDP in 2021, roughly 156.5 billion Canadian dollars, split across extraction, services and manufacturing.
Canadian mining regions: background
Industrial-scale mining began in the 18th century, with an iron mine at Forges du Saint-Maurice (1738 to 1883) and copper at Bruce Mines, Ontario from 1848, so many sites are old and complex.
Canadian mining regions: rules and approvals
Federal coal mining regulations (SOR/90-97) require a qualified person to measure air quantity, flammable gas and carbon monoxide on any roadway where a diesel engine runs, at least once every seven days.
Canadian mining regions: rules and approvals
Where flammable gas exceeds 0.8 percent near electrical equipment or diesel engines the area must be tested at least every eight hours, and a methanometer alarm is required at longwall faces where gas may reach 1.25 percent.
The term · industrial
What “industrial” means for a smartphone
“Industrial” describes a phone built for plant conditions: sealed, drop-resistant and manageable at fleet scale through Android Enterprise. It does not by itself mean the phone may enter a classified area. Only a device with a valid explosion-protection certificate and marking may do that.
The IS-04Z1 is designed to be both an industrial Android phone (IP68, 4,000 mAh battery, 50 MP camera, Android 16 with EMM and MDM support) and an intrinsically safe one. Its explosion-protection certificates are in progress and have not been issued.
In Canadian mining regions. Mine fleets include contractors, maintenance crews and visiting specialists, so MDM or EMM enrolment helps keep devices consistent. The IS-04Z1 is designed for Android 16 management. Connectivity underground differs from surface plants, and charging would take place in safe surface areas, not in the workings.
The route · distribution
Distributing the IS-04Z1 in Canada Mining Operations
SAMS is appointing authorised distributors ahead of the Q4 2026 launch. No territory has been granted for Canadian mining regions yet and applications are reviewed company by company. Because a certified Ex device cannot be opened by an ordinary phone workshop without invalidating its certificate, SAMS looks for partners who can provide competent technical support and after-sales service locally.
What SAMS looks for in a partner
- Operator relationships
- Existing supplier registrations or a clear route to them with the main operators and contractors in Canadian mining regions.
- Ex-competent staff
- People who understand zone classification, markings and the conditions of a certificate.
And equally important
- Local-language support
- Documentation, training and helpdesk in the languages the workforce uses.
- Service capability
- Spares, battery replacement and repair routed through SAMS-approved channels.
Questions · Canada Mining Operations
Frequently asked questions
Can we buy an industrial mobile phone in Canada Mining Operations today?
Not today. Until the certificates are issued the IS-04Z1 stays out of classified areas, and until launch there is nothing to purchase. You can ask for the datasheet and the certification schedule, or book a safe-area evaluation unit.
What does an industrial mobile phone in Canada Mining Operations cost?
SAMS has not published a price. Any figure you are offered for an uncertified Ex phone should be treated with caution; written indicative pricing is available for a defined quantity and site.
Is the IS-04Z1 an industrial phone as well as an Ex phone?
Yes by design: IP68 sealing, a 4,000 mAh battery, a 50 MP camera and Android 16 with EMM and MDM support. The explosion-protection certificates are separate and still in progress.
Which areas at Canadian mining regions would use it?
Likely candidates are underground mine workings, ore processing plants, fuel storage, explosives storage. Which areas are classified, and to what zone, is set by the site operator's own area classification drawings.
How do I become a SAMS distributor for Canadian mining regions?
Apply through the distributor page with your company details and the territory you cover. SAMS reviews applications company by company and has not yet granted a territory for Canadian mining regions.
Are handheld phones allowed underground in coal mines?
Only if certified for the relevant area and permitted by the mine's rules; the federal regulations focus on gas detection, electrical equipment and ventilation, and each mine adds its own policy. Confirm with the mine manager and ask for the approved device list.
What conditions affect equipment at northern mines?
Cold winters, remote locations and long supply routes are typical, so batteries, spares and servicing need planning. Ask the mine about winter handling guidance and the temperature class they require for classified areas.
Does a surface Ex marking cover underground mines in Canada?
Not automatically. The IS-04Z1 target marking, II 2 G Ex ib IIC T4, is a gas-atmosphere marking. Underground equipment generally has to suit the mine's hazard classification and may need approval by the mine's own electrical or safety department. Ask the individual operator what it accepts before assuming suitability.
Related guides
Keep exploring
More on Canada Mining Operations, and on other places in Canada.
Intrinsically Safe Mobile Phone Distributor in Canada Mining OperationsSame place, different guide
IECEx Mobile Phone in Canada Mining OperationsSame place, different guide
Explosion-Proof Mobile Phone in Canada Mining OperationsSame place, different guide
Hazardous Area Mobile Phone Distributor in Canada Mining OperationsSame place, different guide
Rugged Mobile Phone Distributor in Canada Mining OperationsSame place, different guide
Ex-Proof Mobile Phone Distributor in Canada Mining OperationsSame place, different guide
ATEX and IECEx Mobile Phone Distributor in Edmonton RefineryElsewhere in Canada
ATEX and IECEx Mobile Phone Distributor in Alberta Oil SandsElsewhere in Canada
ATEX and IECEx Mobile Phone Distributor in Grande PrairieElsewhere in Canada
ATEX and IECEx Mobile Phone Distributor in Saint John RefineryElsewhere in Canada
Canada market guideCertification route and regulators
All guides for CanadaEvery route we cover
Certification statusWhat is in progress
Enquiry · Canadian mining regions
Ask about the IS-04Z1 for Canadian mining regions, Canada
Share the site details and quantity. You will get the datasheet and the certification schedule back by email; pricing is indicative only until launch.
Enquiry · Canadian mining regions
Launching Q4 2026
Planning for Canada Mining Operations?
Name the site and the operator and we will send what is available before launch.