Skip to content
Certification In Progress · Launching Q4 2026 Become a Distributor
Certification In Progress · Launching Q4 2026 Product Certifications Industries Blog About Contact Become a Distributor
Singapore Shipyard · hazardous area

Hazardous Area Mobile Phone in Singapore Shipyard

Singapore's major shipyards are run by Seatrium, with yards at Admiralty, Benoi, Pioneer, Tuas and Tuas Boulevard, and by ST Engineering. Pioneer Yard has a 1,400 metre quay with 8 to 10 metres of depth, with a second quay of 350 metres, giving long alongside berths for repair work. This page explains what to look for in a hazardous area mobile phone for Singapore shipyards, and where the IS-04Z1 stands against that list today.

Pre-launch · certification in progress · Launching Q4 2026

SAMS IS-04Z1 intrinsically safe smartphone for Singapore Shipyard, front view
Marking targetEx ib IIC T4Intrinsic safety, Zone 1 / 21 design target · certification in progress
AvailabilityQ4 2026via authorised distributors
Search topichazardous area
DeviceMobile Phone
RouteSpecification
WhereSingapore Shipyard

Short answer. The SAMS IS-04Z1 is the intrinsically safe smartphone covered here for Singapore shipyards: pre-launch, designed for Zone 1 and Zone 21 (marking target Ex ib IIC T4), with certification in progress and no certificate issued.

Status: pre-launch. IECEx, ATEX, UKEX and NEC 500 certification is in progress and no certificate has been issued; launch is planned for Q4 2026. A buyer's engineering review is separate from the certificate. Certification status. Place facts reviewed October 2026.

At a glance · hazardous area

Checklist: hazardous area mobile phone for Singapore shipyards

Specification checklist against the IS-04Z1 today
CheckWhat to look forIS-04Z1 today
Zone0, 1 or 2 for gas; 20, 21 or 22 for dustDesigned for Zone 1 and Zone 21
Gas groupIIA, IIB or IICIIC (target)
Area drawingThe operator's own classification drawingDecided by the site operator
Where it appliesSingapore shipyards: Vessel tank spaces, Dry dock and repair work, Paint and coating shopsClassified by the site operator
Product · Singapore Shipyard

The product behind this search: the SAMS IS-04Z1.

SAMS IS-04Z1 explosion proof mobile phone, front view

SAMS IS-04Z1

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Singapore Shipyard. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.

  • IP68 sealed
  • 4,000 mAh battery
  • 50 MP camera
  • Android 16
  • Zone 1 / Zone 21 design target
The site · Singapore shipyards

Singapore shipyards: where the IS-04Z1 would work

Who operates there and which kinds of classified area a handset would meet, from the SAMS site research.

Operators and companies on site

  • Seatrium
  • ST Engineering

Classified areas to expect

  • Vessel tank spaces
  • Dry dock and repair work
  • Paint and coating shops
  • Offshore conversion
Local conditions · Singapore shipyards

Conditions in Singapore shipyards that affect handheld equipment

Seatrium sites

Its official contact page lists Admiralty Yard, Benoi Yard, Pioneer Yard, Tuas Yard and Tuas Boulevard Yard in Singapore.

ST Engineering

ST Engineering acquired the Gul yard in 2023 for ship repair, and keeps its Benoi yard mainly for shipbuilding.

Field notes · Singapore shipyards

More about Singapore shipyards that matters for portable equipment

Singapore shipyards: projects and investment

Two large FPSOs, P-80 and P-82, were christened at the Tuas Boulevard Yard, each designed to produce 225,000 barrels of oil a day.

Singapore shipyards: people and language

Basic worker residential blocks at Benoi Sector and Pioneer Road house many people who work in the western yards, so shift changes concentrate traffic in that corridor.

Singapore shipyards: climate and equipment wear

Heat, humidity and frequent heavy showers affect work on open decks, quays and docks all year round.

Singapore shipyards: projects and investment

Seatrium's repair and upgrade work covers LNG and LPG carriers, cruise ships, ferries, floating production vessels, jack-ups, tankers, container ships and heavy-lift vessels.

The term · hazardous area

What “hazardous area” means for a smartphone

A hazardous area is a place where flammable gas, vapour or combustible dust may be present. Standards divide these into zones: Zones 0, 1 and 2 for gas and vapour, and Zones 20, 21 and 22 for dust. Zone 1 and Zone 21 are the tier where an explosive atmosphere is likely to occur in normal operation, which is where the IS-04Z1 is designed to work. Anything carried in must be marked for the zone, gas group and temperature class of the area.

No certificate has been issued for the IS-04Z1 yet, so it must not be taken into a classified area until the certificate covering it exists and the site operator has accepted it.

In Singapore shipyards. The hazardous areas are vessel tank spaces, dry dock and repair work, paint and coating shops and offshore conversion. These change with each vessel, and the yard classifies them, not SAMS. Smaller independent yards were not checked here, so a specifier should confirm what applies to the yard concerned.

The route · specification

Specifying a hazardous area mobile phone for Singapore Shipyard

A short checklist for anyone writing or reviewing the specification, with the IS-04Z1 status against each point.

Check on the paper

Marking
Equipment group, category, protection concept, gas group and temperature class, matched to the area drawing.
Certificate and schedule
A certificate number, issuing body and the schedule of conditions, not a brochure claim.
Standards edition
The IEC 60079 or national standard edition the certificate was issued against.

Check for the IS-04Z1

Marking target
II 2 G Ex ib IIC T4: a target, not yet a certificate.
Certificate status
IECEx, ATEX, UKEX and NEC 500 in progress; none issued.
Operator approval
Separate from the certificate and handled with the site operator.
Questions · Singapore Shipyard

Frequently asked questions

Can we buy a hazardous area mobile phone in Singapore Shipyard today?

No. Nothing can be bought or taken into a classified area today: certification is in progress and launch is planned for Q4 2026. What is available now is the datasheet, the written certification schedule and evaluation units for safe-area use.

What does a hazardous area mobile phone in Singapore Shipyard cost?

There is no list price yet. SAMS gives indicative pre-launch pricing in writing, against a stated quantity and site, and does not commit to a lead time before certification completes.

Which hazardous areas is the IS-04Z1 designed for?

Zone 1 and Zone 21 (gas and dust) with gas group IIC and temperature class T4, subject to certification. It must not be used in a classified area before its certificate is issued and the site has accepted it.

Which areas at Singapore shipyards would use it?

Likely candidates are vessel tank spaces, dry dock and repair work, paint and coating shops, offshore conversion. Which areas are classified, and to what zone, is set by the site operator's own area classification drawings.

Is intrinsically safe the same as explosion proof?

Not exactly. Explosion proof is a broad everyday term; intrinsic safety is one protection concept, which limits energy so ignition cannot occur. Flameproof (Ex d) is a different concept that contains an explosion. The IS-04Z1 is intrinsically safe by design.

Do large docks create special conditions?

Large graving docks hold very big vessels and many contractors at once, so crowding, crane lifts and hot work overlap. Hazardous-area controls are managed per vessel by the yard's safety team and the owner's representative.

Which Singapore shipyards are major sites for Zone 1 work?

Seatrium's yards at Admiralty, Benoi, Pioneer, Tuas and Tuas Boulevard are the large repair and conversion sites, and other yards operate in the Jurong area. Zone 1 conditions arise inside tanks and pump rooms during repair and coating work.

Do gas-free procedures replace the need for certified equipment?

Not automatically. Tank entry and hot work normally follow per-vessel gas-free and permit procedures set by the yard, and some yards still require certified equipment in certain spaces. The IS-04Z1 has no certificate yet. Ask the yard safety department which rule applies.

Enquiry · Singapore shipyards

Ask about the IS-04Z1 for Singapore shipyards, Singapore

Send the site, zone and gas group and roughly how many handsets. We reply by email with the datasheet and the certification schedule.

Enquiry · Singapore shipyards

Please enter your name.
Please enter your company name.
Enter a valid email address.
Please enter your target market.
Please select one.

Launching Q4 2026

Planning for Singapore Shipyard?

Tell us the zone, gas group and operator. We will send the datasheet and the certification schedule.