Strathcona Refinery
Imperial's Strathcona Refinery opened in 1975, employs about 450 people and is reported at roughly 187,000 barrels per day.
Refinery Row, in Strathcona County east of Edmonton, includes Imperial Oil's Strathcona Refinery and a Suncor refinery. Crude processing units, tank farms and loading areas contain classified areas where Zone 1 and Zone 2 equipment is required. An Ex-proof smartphone distributor in Edmonton refineries (Refinery Row) would carry the IS-04Z1 to these buyers once certification completes.
Pre-launch · certification in progress · Launching Q4 2026
Short answer. Edmonton refineries (Refinery Row) has no appointed SAMS distributor yet: the IS-04Z1 is pre-launch (certification in progress, no certificate issued, launch planned for Q4 2026), and distributor applications are open.
Status: pre-launch. IECEx, ATEX, UKEX and NEC 500 certification is in progress and no certificate has been issued; launch is planned for Q4 2026. A buyer's engineering review is separate from the certificate. Certification status. Place facts reviewed October 2026.
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Ex marking | Group, category, protection concept, gas group, temperature class | II 2 G Ex ib IIC T4 (target) |
| Gas group | IIA, IIB or IIC matched to the area drawing | IIC (target) |
| Temperature class | T-class below the ignition temperature of the gas | T4, 135 °C (target) |
| Where it applies | Edmonton refineries (Refinery Row): Loading racks, Wastewater treatment, Refinery process units | Classified by the site operator |

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Edmonton Refinery. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
The companies on site and the hazardous-area types a handset is likely to meet there.
Imperial's Strathcona Refinery opened in 1975, employs about 450 people and is reported at roughly 187,000 barrels per day.
The area adjoins Alberta's Industrial Heartland, a 582 square kilometre zone dedicated to hydrocarbon processing, so contractors and service firms are close by.
Imperial Oil's Strathcona Refinery, next to Edmonton in Strathcona County, was built in 1975 and is listed at 191,000 barrels a day, producing gasoline, aviation fuel, diesel, lubricating oils, waxes, heavy fuel oil and asphalts.
Of the four upgraders that process mined bitumen, Scotford is the only one not integrated with a mine bitumen plant, so it relies on feedstock supplied from elsewhere.
Sturgeon Refinery, originally designed as a bitumen upgrader, also processes in-situ production from Cold Lake, linking the Edmonton area to heavy-oil supply.
Refinery Row, a concentration of refineries in west Sherwood Park just east of Edmonton, includes the Strathcona Refinery (Imperial Oil) and the Suncor Edmonton Refinery.
“Ex-proof” is shorthand for equipment carrying an explosion-protection marking (the Ex mark) that matches the area it enters. The marking states the protection concept, gas or dust group and temperature class, and it must be backed by a certificate issued by a recognised body, so a phone described as Ex-proof should come with a certificate number you can check.
The IS-04Z1 is designed to carry the marking II 2 G Ex ib IIC T4. That is a target: certification is in progress, no certificate has been issued, and SAMS will publish the certificate numbers when they exist.
In Edmonton refineries (Refinery Row). Refinery process units and loading racks commonly involve hydrocarbon gases and vapours, so the marking check would compare gas group and temperature class with the operator's area data. The IS-04Z1 targets II 2 G Ex ib IIC T4, which covers a wide range of gases, but the operator makes the final fit decision.
SAMS is appointing authorised distributors ahead of the Q4 2026 launch. No territory has been granted for Edmonton refineries (Refinery Row) yet and applications are reviewed company by company. Because a certified Ex device cannot be opened by an ordinary phone workshop without invalidating its certificate, SAMS looks for partners who can provide competent technical support and after-sales service locally.
Not yet. The IS-04Z1 is pre-launch and its certification is still in progress ahead of a Q4 2026 launch. No unit goes into a classified area before the certificate covering it exists. The datasheet, the certification schedule and safe-area evaluation units are available now.
No price is published. While certification is in progress there is no list price and no committed lead time, and a supplier quoting a firm figure for an uncertified Ex handset is promising something it cannot stand behind. Indicative pre-launch pricing is issued in writing against a stated quantity and site.
The marking target is II 2 G Ex ib IIC T4. It becomes a marking only when the certificate is issued; until then it is a design target.
Likely candidates are refinery process units, crude and product tank farms, loading racks, wastewater treatment. Which areas are classified, and to what zone, is set by the site operator's own area classification drawings.
Apply through the distributor page with your company details and the territory you cover. SAMS reviews applications company by company and has not yet granted a territory for Edmonton refineries (Refinery Row).
Cold winters affect outdoor work, and refineries run planned turnarounds outside peak demand. Dates are operator-set, so ask the operator's contractor team about shutdown windows and which devices are approved for process areas.
Refinery Row in Sherwood Park hosts the Strathcona (Imperial) and Suncor Edmonton refineries, and the Scotford and Industrial Heartland cluster has upgrading and refining capacity. Confirm which operator and site you will visit, because device rules are set per site.
Possibly. Equipment is normally approved by the site operator's HSE or electrical authority, and each operator runs its own process. Imperial Oil and Suncor may ask for different documents or trials. A single manufacturer certificate would help, but ask each operator what it requires before moving a device between sites.
Related guides for Edmonton Refinery and for Canada.
Share the site details and quantity. You will get the datasheet and the certification schedule back by email; pricing is indicative only until launch.
Name the site and the operator and we will send what is available before launch.