Provincial regulation
Mine safety is regulated province by province; in Ontario, for example, Regulation 854 (Mines and Mining Plants) under the Occupational Health and Safety Act includes a part on electrical equipment.
Canada Mining Operations · Ex-proof
Ex-Proof Smartphone Distributor in Canada Mining Operations
A regional grouping rather than one site: Canada is a major producer of nickel, copper, potash and uranium, and the Sudbury Basin in Ontario is one of the world's largest nickel and copper ore suppliers. Underground workings, processing plants and fuel and explosives stores are the typical classified or controlled areas. Distribution partners for Canadian mining regions are being identified ahead of the Q4 2026 launch of the IS-04Z1.
Pre-launch · certification in progress · Launching Q4 2026
Marking targetEx ib IIC T4Intrinsic safety, Zone 1 / 21 design target · certification in progress
AvailabilityQ4 2026via authorised distributors
Search topicEx-proof
DeviceSmartphone
RouteDistribution
WhereCanada Mining Operations
Short answer. Canadian mining regions has no appointed SAMS distributor yet: the IS-04Z1 is pre-launch (certification in progress, no certificate issued, launch planned for Q4 2026), and distributor applications are open.
Status: pre-launch. IECEx, ATEX, UKEX and NEC 500 certification is in progress and no certificate has been issued; launch is planned for Q4 2026. An operator's own vendor approval is a separate step. Certification status. Place facts reviewed October 2026.
At a glance · Ex-proof
Checklist: Ex-proof smartphone for Canadian mining regions
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Ex marking | Group, category, protection concept, gas group, temperature class | II 2 G Ex ib IIC T4 (target) |
| Gas group | IIA, IIB or IIC matched to the area drawing | IIC (target) |
| Temperature class | T-class below the ignition temperature of the gas | T4, 135 °C (target) |
| Where it applies | Canadian mining regions: Fuel storage, Explosives storage, Underground mine workings | Classified by the site operator |
Product · Canada Mining Operations
The product behind this search: the SAMS IS-04Z1.
SAMS IS-04Z1
An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Canada Mining Operations. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
- IP68 sealed
- 4,000 mAh battery
- 50 MP camera
- Android 16
- Zone 1 / Zone 21 design target
The site · Canadian mining regions
Canadian mining regions: where the IS-04Z1 would work
Who operates there and which kinds of classified area a handset would meet, from the SAMS site research.
Operators and companies on site
- Vale (Sudbury Basin)
Classified areas to expect
- Underground mine workings
- Ore processing plants
- Fuel storage
- Explosives storage
Local conditions · Canadian mining regions
What Canadian mining regions means for portable equipment
Underground access
Equipment taken underground generally has to suit the mine's hazard classification and may need approval by the mine's own electrical or safety department.
Field notes · Canadian mining regions
More about Canadian mining regions that matters for portable equipment
Canadian mining regions: background
Industrial-scale mining began in the 18th century, with an iron mine at Forges du Saint-Maurice (1738 to 1883) and copper at Bruce Mines, Ontario from 1848, so many sites are old and complex.
Canadian mining regions: industry on the ground
Canada was the world's largest potash producer in 2019 and a top-ten producer of gold, nickel, platinum, iron ore, titanium, niobium, sulphur, molybdenum and cobalt.
Canadian mining regions: rules and approvals
Federal coal mining regulations (SOR/90-97) require a qualified person to measure air quantity, flammable gas and carbon monoxide on any roadway where a diesel engine runs, at least once every seven days.
Canadian mining regions: rules and approvals
Where flammable gas exceeds 0.8 percent near electrical equipment or diesel engines the area must be tested at least every eight hours, and a methanometer alarm is required at longwall faces where gas may reach 1.25 percent.
The term · Ex-proof
What “Ex-proof” means for a smartphone
“Ex-proof” is shorthand for equipment carrying an explosion-protection marking (the Ex mark) that matches the area it enters. The marking states the protection concept, gas or dust group and temperature class, and it must be backed by a certificate issued by a recognised body, so a phone described as Ex-proof should come with a certificate number you can check.
The IS-04Z1 is designed to carry the marking II 2 G Ex ib IIC T4. That is a target: certification is in progress, no certificate has been issued, and SAMS will publish the certificate numbers when they exist.
In Canadian mining regions. A marking check underground would compare the equipment marking with the hazard the mine has classified, and surface fuel storage may call for a gas-group check. The IS-04Z1 targets II 2 G Ex ib IIC T4, which is a surface gas marking. Underground mining may need separate evaluation, so ask the mine before assuming suitability.
The route · distribution
Distributing the IS-04Z1 in Canada Mining Operations
A distributor for Canadian mining regions would carry the IS-04Z1 after certification completes; the Q4 2026 launch is the planning date and no appointment has been made. SAMS reviews applicants one by one and prefers companies with their own Ex-competent technical and service staff, since certified devices must not be repaired outside approved channels.
What SAMS looks for in a partner
- Operator relationships
- Existing supplier registrations or a clear route to them with the main operators and contractors in Canadian mining regions.
- Ex-competent staff
- People who understand zone classification, markings and the conditions of a certificate.
And equally important
- Local-language support
- Documentation, training and helpdesk in the languages the workforce uses.
- Service capability
- Spares, battery replacement and repair routed through SAMS-approved channels.
Questions · Canada Mining Operations
Frequently asked questions
Can we buy an Ex-proof smartphone in Canada Mining Operations today?
No. Nothing can be bought or taken into a classified area today: certification is in progress and launch is planned for Q4 2026. What is available now is the datasheet, the written certification schedule and evaluation units for safe-area use.
What does an Ex-proof smartphone in Canada Mining Operations cost?
No price is published. While certification is in progress there is no list price and no committed lead time, and a supplier quoting a firm figure for an uncertified Ex handset is promising something it cannot stand behind. Indicative pre-launch pricing is issued in writing against a stated quantity and site.
What Ex marking will the IS-04Z1 carry?
The marking target is II 2 G Ex ib IIC T4. It becomes a marking only when the certificate is issued; until then it is a design target.
Which areas at Canadian mining regions would use it?
Likely candidates are underground mine workings, ore processing plants, fuel storage, explosives storage. Which areas are classified, and to what zone, is set by the site operator's own area classification drawings.
How do I become a SAMS distributor for Canadian mining regions?
Apply through the distributor page with your company details and the territory you cover. SAMS reviews applications company by company and has not yet granted a territory for Canadian mining regions.
Are handheld phones allowed underground in coal mines?
Only if certified for the relevant area and permitted by the mine's rules; the federal regulations focus on gas detection, electrical equipment and ventilation, and each mine adds its own policy. Confirm with the mine manager and ask for the approved device list.
What conditions affect equipment at northern mines?
Cold winters, remote locations and long supply routes are typical, so batteries, spares and servicing need planning. Ask the mine about winter handling guidance and the temperature class they require for classified areas.
Does a surface Ex marking cover underground mines in Canada?
Not automatically. The IS-04Z1 target marking, II 2 G Ex ib IIC T4, is a gas-atmosphere marking. Underground equipment generally has to suit the mine's hazard classification and may need approval by the mine's own electrical or safety department. Ask the individual operator what it accepts before assuming suitability.
Related guides
Keep exploring
Other guides for Canada Mining Operations, other places in Canada, and the pages behind them.
Explosion-Proof Mobile Phone Distributor in Canada Mining OperationsSame place, different guide
Industrial Mobile Phone Distributor in Canada Mining OperationsSame place, different guide
Hazardous Area Mobile Phone Distributor in Canada Mining OperationsSame place, different guide
ATEX and IECEx Mobile Phone in Canada Mining OperationsSame place, different guide
Intrinsically Safe Mobile Phone in Canada Mining OperationsSame place, different guide
IECEx Mobile Phone Distributor in Canada Mining OperationsSame place, different guide
ATEX and IECEx Mobile Phone Distributor in Montney Gas FieldElsewhere in Canada
ATEX and IECEx Mobile Phone Distributor in Kitimat LNGElsewhere in Canada
ATEX and IECEx Mobile Phone Distributor in Sarnia RefineryElsewhere in Canada
ATEX and IECEx Mobile Phone Distributor in Red Deer IndustrialElsewhere in Canada
Canada market guideCertification route and regulators
All guides for CanadaEvery route we cover
Certification statusWhat is in progress
Enquiry · Canadian mining regions
Ask about the IS-04Z1 for Canadian mining regions, Canada
Tell us what you need to equip and where. The SAMS team answers by email with the datasheet and where each certification route stands.
Enquiry · Canadian mining regions
Launching Q4 2026
Planning for Canada Mining Operations?
Tell us the zone, gas group and operator. We will send the datasheet and the certification schedule.