ST Engineering
ST Engineering acquired the Gul yard in 2023 for ship repair, and keeps its Benoi yard mainly for shipbuilding.
Basic worker residential blocks at Benoi Sector and Pioneer Road house many people who work in the western yards, so shift changes concentrate traffic in that corridor. Repair, conversion and newbuild work brings Zone 1 conditions into tanks, cargo spaces and paint areas. If you are specifying an Ex-proof mobile phone for Singapore shipyards, this page covers the markings, the approvals and the current certification status of the IS-04Z1.
Pre-launch · certification in progress · Launching Q4 2026
Short answer. The SAMS IS-04Z1 is the intrinsically safe smartphone covered here for Singapore shipyards: pre-launch, designed for Zone 1 and Zone 21 (marking target Ex ib IIC T4), with certification in progress and no certificate issued.
Current position: certification in progress, nothing issued, launch targeted for Q4 2026. A buyer's engineering review is separate from the certificate. Certification status. Place facts reviewed October 2026.
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Ex marking | Group, category, protection concept, gas group, temperature class | II 2 G Ex ib IIC T4 (target) |
| Gas group | IIA, IIB or IIC matched to the area drawing | IIC (target) |
| Temperature class | T-class below the ignition temperature of the gas | T4, 135 °C (target) |
| Where it applies | Singapore shipyards: Vessel tank spaces, Dry dock and repair work, Paint and coating shops | Classified by the site operator |

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Singapore Shipyard. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
The companies on site and the hazardous-area types a handset is likely to meet there.
ST Engineering acquired the Gul yard in 2023 for ship repair, and keeps its Benoi yard mainly for shipbuilding.
Sembcorp Marine and Keppel Offshore & Marine combined as Seatrium in 2023.
Seatrium lists its Singapore yards at Admiralty Road West, 15 Benoi Road, 50 Gul Road, 51 Pioneer Sector 1 and 80 Tuas South Boulevard, each with its own gate and switchboard.
Two large FPSOs, P-80 and P-82, were christened at the Tuas Boulevard Yard, each designed to produce 225,000 barrels of oil a day.
Pioneer Yard has a 1,400 metre quay with 8 to 10 metres of depth, with a second quay of 350 metres, giving long alongside berths for repair work.
Heat, humidity and frequent heavy showers affect work on open decks, quays and docks all year round.
“Ex-proof” is shorthand for equipment carrying an explosion-protection marking (the Ex mark) that matches the area it enters. The marking states the protection concept, gas or dust group and temperature class, and it must be backed by a certificate issued by a recognised body, so a phone described as Ex-proof should come with a certificate number you can check.
The IS-04Z1 is designed to carry the marking II 2 G Ex ib IIC T4. That is a target: certification is in progress, no certificate has been issued, and SAMS will publish the certificate numbers when they exist.
In Singapore shipyards. The yards report Zone 1 conditions in tank spaces, dry dock and repair work, paint and coating shops and offshore conversion. A marking check would compare gas group and temperature class with the cargo or solvent in each space. The IS-04Z1 target marking is II 2 G Ex ib IIC T4, not yet issued.
A short checklist for anyone writing or reviewing the specification, with the IS-04Z1 status against each point.
Not today. Until the certificates are issued the IS-04Z1 stays out of classified areas, and until launch there is nothing to purchase. You can ask for the datasheet and the certification schedule, or book a safe-area evaluation unit.
There is no list price yet. SAMS gives indicative pre-launch pricing in writing, against a stated quantity and site, and does not commit to a lead time before certification completes.
The marking target is II 2 G Ex ib IIC T4. It becomes a marking only when the certificate is issued; until then it is a design target.
Likely candidates are vessel tank spaces, dry dock and repair work, paint and coating shops, offshore conversion. Which areas are classified, and to what zone, is set by the site operator's own area classification drawings.
Not exactly. Explosion proof is a broad everyday term; intrinsic safety is one protection concept, which limits energy so ignition cannot occur. Flameproof (Ex d) is a different concept that contains an explosion. The IS-04Z1 is intrinsically safe by design.
Large graving docks hold very big vessels and many contractors at once, so crowding, crane lifts and hot work overlap. Hazardous-area controls are managed per vessel by the yard's safety team and the owner's representative.
Seatrium's yards at Admiralty, Benoi, Pioneer, Tuas and Tuas Boulevard are the large repair and conversion sites, and other yards operate in the Jurong area. Zone 1 conditions arise inside tanks and pump rooms during repair and coating work.
Not automatically. Tank entry and hot work normally follow per-vessel gas-free and permit procedures set by the yard, and some yards still require certified equipment in certain spaces. The IS-04Z1 has no certificate yet. Ask the yard safety department which rule applies.
Related guides for Singapore Shipyard and for Singapore.
Share the site details and quantity. You will get the datasheet and the certification schedule back by email; pricing is indicative only until launch.
Name the site and the operator and we will send what is available before launch.