Spread across regions
Refineries sit in the south-east, south, north-east and elsewhere, so logistics differ by site.
This is a regional grouping rather than a single site. Petrobras operates about ten refineries in Brazil, including Replan at Paulinia (415,000 barrels a day), Revap at Sao Jose dos Campos and Reduc at Duque de Caxias, each with classified process, storage and loading areas. An Ex-proof mobile phone distributor in Brazilian refineries would carry the IS-04Z1 to these buyers once certification completes.
Pre-launch · certification in progress · Launching Q4 2026
Short answer. Brazilian refineries has no appointed SAMS distributor yet: the IS-04Z1 is pre-launch (certification in progress, no certificate issued, launch planned for Q4 2026), and distributor applications are open.
Where things stand: the IS-04Z1 has not launched, and none of its four certification routes has produced a certificate yet. Operator approval runs on its own timeline. Certification status. Place facts reviewed October 2026.
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Ex marking | Group, category, protection concept, gas group, temperature class | II 2 G Ex ib IIC T4 (target) |
| Gas group | IIA, IIB or IIC matched to the area drawing | IIC (target) |
| Temperature class | T-class below the ignition temperature of the gas | T4, 135 °C (target) |
| Where it applies | Brazilian refineries: Hydrotreater and hydrogen units, Flare and wastewater areas, Refinery process units | Classified by the site operator |

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Brazil Refineries. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
Who operates there and which kinds of classified area a handset would meet, from the SAMS site research.
Refineries sit in the south-east, south, north-east and elsewhere, so logistics differ by site.
Planned maintenance shutdowns bring large contractor workforces into classified areas; Reduc, for example, has shutdowns scheduled in 2026.
Revamp projects are under way at the Presidente Bernardes (RPBC), Paulinia (Replan) and Duque de Caxias (Reduc) refineries, with hydroprocessing units planned at Revap and Refap.
Under the Strategic Plan 2024-28+ Petrobras budgets 16.7 billion US dollars across refining, transport and marketing, with 9 billion dollars earmarked for refining, which implies a long pipeline of shutdown and revamp work.
Petrobras' REPLAN refinery at Paulinia, Sao Paulo, is the largest in Brazil at 434,000 barrels per day, and the 208,000 b/d REPAR refinery at Araucaria, Parana, is another major site in the 2024-28 plan.
Regap has a photovoltaic plant of 13,300 kW with about 20,000 solar panels, the first at a Petrobras refinery, and Petrobras plans 55.5 MW of solar capacity across its refining sites.
“Ex-proof” is shorthand for equipment carrying an explosion-protection marking (the Ex mark) that matches the area it enters. The marking states the protection concept, gas or dust group and temperature class, and it must be backed by a certificate issued by a recognised body, so a phone described as Ex-proof should come with a certificate number you can check.
The IS-04Z1 is designed to carry the marking II 2 G Ex ib IIC T4. That is a target: certification is in progress, no certificate has been issued, and SAMS will publish the certificate numbers when they exist.
In Brazilian refineries. A marking check at a hydrotreater or hydrogen unit differs from one at a product tank farm, since gas group and temperature class follow the product. Reviewers compare the label with the site's classification drawings. The IS-04Z1 marking target II 2 G Ex ib IIC T4 is not a certificate.
Distribution of the IS-04Z1 is by authorised partners only, and SAMS has not yet granted a territory for Brazilian refineries. Each application is reviewed on its merits. Because opening a certified Ex handset in an ordinary workshop invalidates its certificate, the partner must be able to support and service the device locally.
No. Nothing can be bought or taken into a classified area today: certification is in progress and launch is planned for Q4 2026. What is available now is the datasheet, the written certification schedule and evaluation units for safe-area use.
No price is published. While certification is in progress there is no list price and no committed lead time, and a supplier quoting a firm figure for an uncertified Ex handset is promising something it cannot stand behind. Indicative pre-launch pricing is issued in writing against a stated quantity and site.
The marking target is II 2 G Ex ib IIC T4. It becomes a marking only when the certificate is issued; until then it is a design target.
Likely candidates are refinery process units, crude and product tank farms, loading racks and jetties, hydrotreater and hydrogen units. Which areas are classified, and to what zone, is set by the site operator's own area classification drawings.
Apply through the distributor page with your company details and the territory you cover. SAMS reviews applications company by company and has not yet granted a territory for Brazilian refineries.
Process units, pump areas, tank farms, loading racks and sample points commonly contain Zone 1 or Zone 2 gas areas, often gas group IIA or IIB with hydrogen areas in IIC. The refinery's area classification drawings are the authority, so request them before specifying handheld devices.
Current plans point to Replan, Repar, Regap, Reduc, RPBC and Abreu e Lima, with revamps, hydroprocessing and sustainable fuels projects announced. Timelines can shift, so treat them as indicative and confirm scope and schedule with the operator or its main contractors.
No. Petrobras has sold some refineries, for example RLAM in Bahia and Reman in Manaus, so procurement rules differ by owner. Purchasing is usually through registered-supplier processes. Confirm equipment approval and documentation requirements with the site operator and its HSE team.
Related guides for Brazil Refineries and for Brazil.
Tell us what you need to equip and where. The SAMS team answers by email with the datasheet and where each certification route stands.
Send the zone and gas group of your site and we will reply with the datasheet and schedule.