Dispersed sites
The play extends through areas around Fort St. John and Dawson Creek in British Columbia and into Alberta, so facilities are spread over a wide area.
The Montney Formation covers about 130,000 square kilometres of British Columbia and Alberta and is a major shale gas and tight oil resource. Wellpads, compressor stations and gas plants across it contain classified areas. Distribution partners for Montney gas play are being identified ahead of the Q4 2026 launch of the IS-04Z1.
Pre-launch · certification in progress · Launching Q4 2026
Short answer. Montney gas play has no appointed SAMS distributor yet: the IS-04Z1 is pre-launch (certification in progress, no certificate issued, launch planned for Q4 2026), and distributor applications are open.
Status: pre-launch. IECEx, ATEX, UKEX and NEC 500 certification is in progress and no certificate has been issued; launch is planned for Q4 2026. A buyer's engineering review is separate from the certificate. Certification status. Place facts reviewed October 2026.
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Ingress protection | IP65 to IP68 sealing | IP68 design |
| Drop and shock | A stated drop height onto concrete | Specification on request |
| Explosion protection | A separate certificate and marking | In progress; not issued |
| Where it applies | Montney gas play: Compressor stations, Condensate handling, Wellpads and wellheads | Classified by the site operator |

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Montney Gas Field. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
Who operates there and which kinds of classified area a handset would meet, from the SAMS site research.
The play extends through areas around Fort St. John and Dawson Creek in British Columbia and into Alberta, so facilities are spread over a wide area.
ARC Resources has described Attachie near Fort St. John producing more than 30,000 barrels of oil equivalent per day, including condensate.
Most of the gas lies in about 35,000 km2 on the Montney's west side, of which roughly 25,000 km2 of core areas are developed first because of better reservoir quality.
Average Montney wells ramp up over the first one to three months, peak and then decline steeply, so operators keep drilling and completing new wells to hold output, which sustains demand for field services.
The Montney Formation covers about 130,000 km2 in western Canada and could produce about 449 trillion cubic feet of natural gas with modern technology, making it one of North America's largest gas resources.
Grande Prairie, a regional service hub, reports Montney output has doubled since 2012 and is a third of Western Canada's gas, projected to exceed half of national output by 2040.
A rugged phone is built to survive water, dust, drops and rough handling, usually rated by an IP code and a drop specification. Ruggedness is an environmental property: it says nothing about whether a phone may be used where flammable gas or dust is present. That is decided by explosion-protection certification and marking.
The IS-04Z1 combines both: an IP68 sealed rugged build and a design for Zone 1 and Zone 21 (marking target Ex ib IIC T4). The explosion-protection certificates are in progress and none has been issued.
In Montney gas play. The formation covers about 130,000 square kilometres across British Columbia and Alberta, so conditions vary with location, and northern winters are cold. IP68 helps against dust and water but is not explosion protection. Check the datasheet's temperature range, and plan for remote travel and sheltered charging.
A distributor for Montney gas play would carry the IS-04Z1 after certification completes; the Q4 2026 launch is the planning date and no appointment has been made. SAMS reviews applicants one by one and prefers companies with their own Ex-competent technical and service staff, since certified devices must not be repaired outside approved channels.
No. Nothing can be bought or taken into a classified area today: certification is in progress and launch is planned for Q4 2026. What is available now is the datasheet, the written certification schedule and evaluation units for safe-area use.
There is no list price yet. SAMS gives indicative pre-launch pricing in writing, against a stated quantity and site, and does not commit to a lead time before certification completes.
It is designed to IP68 sealing, with glove-friendly controls. Ruggedness is not explosion protection: that depends on the certificates, which are in progress.
Likely candidates are wellpads and wellheads, gas processing plants, compressor stations, condensate handling. Which areas are classified, and to what zone, is set by the site operator's own area classification drawings.
Apply through the distributor page with your company details and the territory you cover. SAMS reviews applications company by company and has not yet granted a territory for Montney gas play.
Northern Alberta and northeastern British Columbia have cold winters, so devices need low-temperature ratings and warm storage. Confirm the operator's winter equipment guidance and temperature class.
Mostly by field road from service hubs such as Grande Prairie, with winter and spring access depending on road conditions. Confirm access arrangements and vehicle rules for powered devices with the operator.
Not necessarily. The play spans two provinces and several operators, each with its own HSE approval. A manufacturer certificate would help, but operators decide what they accept. Confirm the jurisdiction and equipment approval requirements for each site, and ask each operator what documents it needs.
More on Montney Gas Field, and on other places in Canada.
Share the site details and quantity. You will get the datasheet and the certification schedule back by email; pricing is indicative only until launch.
Send the zone and gas group of your site and we will reply with the datasheet and schedule.