Pertamina: projects and investment
PT Donggi Senoro LNG in Banggai Regency, Central Sulawesi, has one train with 2 million tonnes a year capacity, giving another LNG site where Pertamina has an investment.
Pertamina is Indonesia's state-owned energy company, headquartered in Jakarta and founded in 1968. PT Badak LNG operates a plant at Bontang in East Kalimantan with 8 trains and a total capacity of 22.5 million tonnes a year, in which Pertamina has invested through an operating company. This page sets out how an intrinsically safe smartphone supply route to Pertamina will work for the IS-04Z1, and what is and is not available before launch.
Pre-launch · certification in progress · Launching Q4 2026
Short answer. An intrinsically safe smartphone for Pertamina cannot be bought yet: the SAMS IS-04Z1 is pre-launch (certification in progress, no certificate issued), and the datasheet, certification schedule and safe-area evaluation units are available now.
Current position: certification in progress, nothing issued, launch targeted for Q4 2026. An operator's own vendor approval is a separate step. Certification status. Place facts reviewed October 2026.
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Level of protection | ia, ib or ic matched to the zone | ib, for Zone 1 |
| Entity parameters | Uo, Io and Po within the device limits | Published with the certificate |
| Accessories | Chargers and cases certified with the device | Defined at certification |
| Where it applies | Pertamina: Refinery process units, Oil and gas production facilities, Fuel terminals | Classified by the site operator |

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Indonesia. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
Where it operates and the kinds of classified area a handset would meet there.
Pertamina lists a general procurement programme and an e-procurement system (GEPSMART) on its website; confirm current vendor requirements with Pertamina. The Ex certificate and an organisation's own vendor or engineering approval are two separate timelines; SAMS is working towards both and holds neither today.
PT Donggi Senoro LNG in Banggai Regency, Central Sulawesi, has one train with 2 million tonnes a year capacity, giving another LNG site where Pertamina has an investment.
Pertamina was created in August 1968 by merging Pertamin and Permina, and in 2003 it became a limited company, PT Pertamina (Persero), under the 2001 Oil and Natural Gas Act.
Like other contractors, Pertamina holds a cooperation contract with the Oil and Gas Regulatory Body, and it falls under the coordination of the Ministry of State-Owned Enterprises.
The company is headquartered in Jakarta, while its major refineries and LNG plants are in West Java, East Kalimantan, Central Sulawesi and Aceh, so travel between sites often involves flights.
Intrinsic safety limits the electrical and thermal energy in a circuit so that neither a spark nor a hot surface can ignite a gas or dust atmosphere, even when a fault occurs. The ib level, used for Zone 1, tolerates one fault. It is the usual way to make a handheld device that a worker carries continuously through a hazardous area.
The IS-04Z1 is designed on this principle for Zone 1 and Zone 21 (marking target II 2 G Ex ib IIC T4). Intrinsic safety is a design basis, not a certificate: certification is in progress and none has been issued yet.
In Pertamina. Operators at Pertamina refineries and fuel terminals walk long routes between units, tank areas and loading points. A handheld intrinsically safe phone allows tag scanning, photographs and shift reports without leaving the classified area to find a safe desk. That is especially useful during turnarounds, when many contractors work close to live equipment.
There is no stock to order for Pertamina yet. The IS-04Z1 is pre-launch, certification is in progress, and supply will run through authorised distributors after the certificates are issued. Procurement teams can prepare now with the datasheet, the certification schedule and a safe-area evaluation.
The technical specification, marking target and conditions of use, sent by email.
Which certificates are in progress, in what order, and what is still to be confirmed.
Evaluation units can be used for connectivity, MDM enrolment and workflow testing outside classified areas.
Tell us the site, zone, gas group and quantity so the right authorised distributor can contact you.
No. Nothing can be bought or taken into a classified area today: certification is in progress and launch is planned for Q4 2026. What is available now is the datasheet, the written certification schedule and evaluation units for safe-area use.
There is no list price yet. SAMS gives indicative pre-launch pricing in writing, against a stated quantity and site, and does not commit to a lead time before certification completes.
The circuits are designed to limit energy so a spark or hot surface cannot ignite a gas or dust atmosphere, even with one fault (level ib, Zone 1). Certification of that design is in progress.
Pertamina lists a general procurement programme and an e-procurement system (GEPSMART) on its website; confirm current vendor requirements with Pertamina.
Through authorised distributors once certificates exist. Until then SAMS can send the datasheet and certification schedule and arrange safe-area evaluation units.
Most Pertamina sites are hot and humid with heavy rain and coastal salt air, which stresses seals, connectors and batteries. For handheld devices look for strong ingress protection, corrosion resistance and thermal management, and ask the site about its own environmental limits.
Indonesia uses its own national standard conformity system alongside recognised international explosive-atmosphere certificates, and oil and gas operators apply their own specifications. Confirm with Pertamina and the site which certificates and local registration are accepted before offering handheld devices.
Typical uses would be the refinery process units at sites such as Dumai, Cilacap and Balongan, plus fuel terminals and production facilities. Which areas count as classified is Pertamina's call. Ask each site's HSE team for its area drawings before checking the IS-04Z1's target marking against them.
Related guides for Pertamina and for Indonesia.
Share the site details and quantity. You will get the datasheet and the certification schedule back by email; pricing is indicative only until launch.
Send the zone and gas group of your site and we will reply with the datasheet and schedule.