Skip to content
Certification In Progress · Launching Q4 2026 Become a Distributor
Certification In Progress · Launching Q4 2026 Product Certifications Industries Blog About Contact Become a Distributor
Indonesia Mining · intrinsically safe

Intrinsically Safe Smartphone in Indonesia Mining

Indonesian mining includes coal in Kalimantan, nickel in Sulawesi and the Grasberg copper-gold complex in Papua. Fuel storage, coal handling, process plants and smelters create hazardous areas, with dust areas at coal preparation and underground work at Grasberg. If you are specifying an intrinsically safe smartphone for Indonesian mining regions, this page covers the markings, the approvals and the current certification status of the IS-04Z1.

Pre-launch · certification in progress · Launching Q4 2026

SAMS IS-04Z1 intrinsically safe smartphone for Indonesia Mining, front view
Marking targetEx ib IIC T4Intrinsic safety, Zone 1 / 21 design target · certification in progress
AvailabilityQ4 2026via authorised distributors
Search topicintrinsically safe
DeviceSmartphone
RouteSpecification
WhereIndonesia Mining

Short answer. The SAMS IS-04Z1 is the intrinsically safe smartphone covered here for Indonesian mining regions: pre-launch, designed for Zone 1 and Zone 21 (marking target Ex ib IIC T4), with certification in progress and no certificate issued.

Status: pre-launch. IECEx, ATEX, UKEX and NEC 500 certification is in progress and no certificate has been issued; launch is planned for Q4 2026. Operator approval runs on its own timeline. Certification status. Place facts reviewed October 2026.

At a glance · intrinsically safe

Checklist: intrinsically safe smartphone for Indonesian mining regions

Specification checklist against the IS-04Z1 today
CheckWhat to look forIS-04Z1 today
Level of protectionia, ib or ic matched to the zoneib, for Zone 1
Entity parametersUo, Io and Po within the device limitsPublished with the certificate
AccessoriesChargers and cases certified with the deviceDefined at certification
Where it appliesIndonesian mining regions: Coal handling and preparation plants (dust, Zone 21), Fuel and lubricant storage, Underground mine areasClassified by the site operator
Product · Indonesia Mining

The product behind this search: the SAMS IS-04Z1.

SAMS IS-04Z1 explosion proof mobile phone, front view

SAMS IS-04Z1

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Indonesia Mining. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.

  • IP68 sealed
  • 4,000 mAh battery
  • 50 MP camera
  • Android 16
  • Zone 1 / Zone 21 design target
The site · Indonesian mining regions

Indonesian mining regions at a glance: who is there, what is classified

A short profile of the site and the kinds of classified area that matter for portable equipment.

Operators and companies on site

  • PT Freeport Indonesia (Grasberg)
  • Kaltim Prima Coal (Sangatta)
  • Adaro Indonesia (Tutupan)
  • Vale Indonesia (Sorowako)

Classified areas to expect

  • Coal handling and preparation plants (dust, Zone 21)
  • Fuel and lubricant storage
  • Underground mine areas
  • Smelter and process plant areas
Local conditions · Indonesian mining regions

Conditions in Indonesian mining regions that affect handheld equipment

Remote sites

Large operations such as Grasberg, at about 4,100 metres elevation, rely on long supply chains by air, road and sea.

Nickel hubs

The Indonesia Morowali Industrial Park, begun in 2013 in Central Sulawesi, is reported to be the largest nickel-based industrial area, with 11 smelters.

Field notes · Indonesian mining regions

More about Indonesian mining regions that matters for portable equipment

Indonesian mining regions: projects and investment

PT Borneo Alumina Indonesia finished an alumina refinery in West Kalimantan with a capacity of 1 million tonnes a year, starting operations in December 2024, and Freeport built a 0.6 million tonne copper smelter at Manyar in East Java.

Indonesian mining regions: infrastructure

Nickel output reached about 2.2 million tonnes in 2023 and relies heavily on coal-fired power, accounting for around 22 percent of national energy and industrial emissions, so captive coal power plants sit beside many smelters.

Indonesian mining regions: infrastructure

The Indonesia Morowali Industrial Park in Central Sulawesi, the country's largest nickel processing site, covers 2,000 hectares and is served by its own seaport, an airport and a 2 GW coal power plant.

Indonesian mining regions: industry on the ground

In 2024 Indonesia was estimated to be the world's leading producer of mined nickel at 62 percent of global output, and second for tin at 19 percent and cobalt at 12 percent.

The term · intrinsically safe

What “intrinsically safe” means for a smartphone

Intrinsic safety limits the electrical and thermal energy in a circuit so that neither a spark nor a hot surface can ignite a gas or dust atmosphere, even when a fault occurs. The ib level, used for Zone 1, tolerates one fault. It is the usual way to make a handheld device that a worker carries continuously through a hazardous area.

The IS-04Z1 is designed on this principle for Zone 1 and Zone 21 (marking target II 2 G Ex ib IIC T4). Intrinsic safety is a design basis, not a certificate: certification is in progress and none has been issued yet.

In Indonesian mining regions. Mine inspections, fuel storage checks and plant rounds are spread over large, remote sites. A handheld designed for intrinsically safe use could keep checklists and photos on one device, but only where its gas marking suits the area. Underground and dust areas need separate assessment.

The route · specification

Specifying an intrinsically safe smartphone for Indonesia Mining

A short checklist for anyone writing or reviewing the specification, with the IS-04Z1 status against each point.

Check on the paper

Marking
Equipment group, category, protection concept, gas group and temperature class, matched to the area drawing.
Certificate and schedule
A certificate number, issuing body and the schedule of conditions, not a brochure claim.
Standards edition
The IEC 60079 or national standard edition the certificate was issued against.

Check for the IS-04Z1

Marking target
II 2 G Ex ib IIC T4: a target, not yet a certificate.
Certificate status
IECEx, ATEX, UKEX and NEC 500 in progress; none issued.
Operator approval
Separate from the certificate and handled with the site operator.
Questions · Indonesia Mining

Frequently asked questions

Can we buy an intrinsically safe smartphone in Indonesia Mining today?

Not today. Until the certificates are issued the IS-04Z1 stays out of classified areas, and until launch there is nothing to purchase. You can ask for the datasheet and the certification schedule, or book a safe-area evaluation unit.

What does an intrinsically safe smartphone in Indonesia Mining cost?

No price is published. While certification is in progress there is no list price and no committed lead time, and a supplier quoting a firm figure for an uncertified Ex handset is promising something it cannot stand behind. Indicative pre-launch pricing is issued in writing against a stated quantity and site.

What does ‘intrinsically safe’ mean for the IS-04Z1?

The circuits are designed to limit energy so a spark or hot surface cannot ignite a gas or dust atmosphere, even with one fault (level ib, Zone 1). Certification of that design is in progress.

Which areas at Indonesian mining regions would use it?

Likely candidates are coal handling and preparation plants (dust, zone 21), fuel and lubricant storage, underground mine areas, smelter and process plant areas. Which areas are classified, and to what zone, is set by the site operator's own area classification drawings.

Is intrinsically safe the same as explosion proof?

Not exactly. Explosion proof is a broad everyday term; intrinsic safety is one protection concept, which limits energy so ignition cannot occur. Flameproof (Ex d) is a different concept that contains an explosion. The IS-04Z1 is intrinsically safe by design.

Which parts of a mining operation in Indonesia need hazardous-area equipment?

Typical examples are underground methane or coal-dust zones, fuel storage and workshops, explosives magazines, smelter and processing areas with gases or dust, and captive power plants. Each operator classifies its own site, so confirm the zones with the mine's safety department.

Are nickel smelter sites different from coal mines for phone and radio use?

Yes. Smelters and acid-leach plants emphasise process gases, chemicals and high temperatures, while coal mines emphasise methane and combustible dust. The device choice and the area type differ, so ask each site for its classification and permit rules.

How should remote mine sites affect a buying decision?

Remote operations rely on long supply chains, so a failed device may take time to replace. Plan spares, local service access and offline-capable apps. Check heat, wet and altitude conditions at each site. Confirm site rules with the operator.

Enquiry · Indonesian mining regions

Ask about the IS-04Z1 for Indonesian mining regions, Indonesia

Tell us what you need to equip and where. The SAMS team answers by email with the datasheet and where each certification route stands.

Enquiry · Indonesian mining regions

Please enter your name.
Please enter your company name.
Enter a valid email address.
Please enter your target market.
Please select one.

Launching Q4 2026

Planning for Indonesia Mining?

Name the site and the operator and we will send what is available before launch.