Sinopec: background
Sinopec Limited was established in February 2000 and listed in Hong Kong, New York and London in October 2000, raising 3.5 billion dollars, and a Shanghai listing followed in 2001.
Sinopec is a Beijing-headquartered state-controlled energy and chemicals group and the world's largest oil refining conglomerate. It operates refineries, petrochemical complexes and upstream units such as Shengli Oilfield in Shandong, and the Zhenhai base in Ningbo, upgraded to 40 million tonnes a year. If you are specifying an intrinsically safe mobile phone for Sinopec, this page covers the markings, the approvals and the current certification status of the IS-04Z1.
Pre-launch · certification in progress · Launching Q4 2026
Short answer. The SAMS IS-04Z1 is the intrinsically safe smartphone covered here for Sinopec: pre-launch, designed for Zone 1 and Zone 21 (marking target Ex ib IIC T4), with certification in progress and no certificate issued.
Status: pre-launch. IECEx, ATEX, UKEX and NEC 500 certification is in progress and no certificate has been issued; launch is planned for Q4 2026. Operator approval runs on its own timeline. Certification status. Place facts reviewed October 2026.
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Level of protection | ia, ib or ic matched to the zone | ib, for Zone 1 |
| Entity parameters | Uo, Io and Po within the device limits | Published with the certificate |
| Accessories | Chargers and cases certified with the device | Defined at certification |
| Where it applies | Sinopec: Refinery process units, Petrochemical plants, Oil and gas production facilities | Classified by the site operator |

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in China. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
Where it operates and the kinds of classified area a handset would meet there.
Sinopec buys largely through its own EPEC.com procurement portal, and only suppliers certified by Sinopec can sell on it; confirm current certification steps with Sinopec. The Ex certificate and an organisation's own vendor or engineering approval are two separate timelines; SAMS is working towards both and holds neither today.
Sinopec Limited was established in February 2000 and listed in Hong Kong, New York and London in October 2000, raising 3.5 billion dollars, and a Shanghai listing followed in 2001.
Sinopec Group is based in Chaoyang District, Beijing, and is administered by SASAC on behalf of the State Council, with listed subsidiary Sinopec Limited traded in Hong Kong and Shanghai.
Sinopec Group is a Beijing-based state-owned enterprise, administered by SASAC for the State Council.
The Jiujiang Petrochemical Complex was first built in 1975, has been upgraded repeatedly and processes about 8 million tonnes of crude oil a year, so old and modern plant sit together on one site.
Intrinsic safety limits the electrical and thermal energy in a circuit so that neither a spark nor a hot surface can ignite a gas or dust atmosphere, even when a fault occurs. The ib level, used for Zone 1, tolerates one fault. It is the usual way to make a handheld device that a worker carries continuously through a hazardous area.
The IS-04Z1 is designed on this principle for Zone 1 and Zone 21 (marking target II 2 G Ex ib IIC T4). Intrinsic safety is a design basis, not a certificate: certification is in progress and none has been issued yet.
In Sinopec. Large refinery and petrochemical sites such as Zhenhai in Ningbo involve long inspection routes and turnaround campaigns with photographing, tag reading and permits. A handheld designed as intrinsically safe could carry that on one device. The IS-04Z1 is designed for this use, though certification is still in progress.
A short checklist for anyone writing or reviewing the specification, with the IS-04Z1 status against each point.
No. Nothing can be bought or taken into a classified area today: certification is in progress and launch is planned for Q4 2026. What is available now is the datasheet, the written certification schedule and evaluation units for safe-area use.
No price is published. While certification is in progress there is no list price and no committed lead time, and a supplier quoting a firm figure for an uncertified Ex handset is promising something it cannot stand behind. Indicative pre-launch pricing is issued in writing against a stated quantity and site.
The circuits are designed to limit energy so a spark or hot surface cannot ignite a gas or dust atmosphere, even with one fault (level ib, Zone 1). Certification of that design is in progress.
Sinopec buys largely through its own EPEC.com procurement portal, and only suppliers certified by Sinopec can sell on it; confirm current certification steps with Sinopec.
Not exactly. Explosion proof is a broad everyday term; intrinsic safety is one protection concept, which limits energy so ignition cannot occur. Flameproof (Ex d) is a different concept that contains an explosion. The IS-04Z1 is intrinsically safe by design.
Typical Zone 1 and Zone 2 areas are found at refineries, ethylene and petrochemical plants, tank farms, loading terminals and fuel stations. Classification is site-specific, so request the area classification drawings from the plant's safety department before choosing handheld devices.
Chinese plants commonly expect equipment for explosive atmospheres to hold the national explosion-protection certificate and marking, sometimes alongside international certificates. Confirm with the specific plant which approvals are accepted, and whether an inspection or registration step applies.
Zhenhai is a coastal refinery and petrochemical base with humid salty air, while Shengli is an upstream oilfield in Shandong with colder winters. Their area classifications also differ. Compare the device marking with each site's documents. The IS-04Z1 is not yet certified. Confirm with Sinopec's HSE team.
More on Sinopec, and on other places in China.
Send the site, zone and gas group and roughly how many handsets. We reply by email with the datasheet and the certification schedule.
Send the zone and gas group of your site and we will reply with the datasheet and schedule.