Wildfire history
The May 2016 wildfire forced the evacuation of about 88,000 people and halted production at facilities north of the city.
Fort McMurray in northern Alberta is the commercial and administrative centre of the Athabasca oil sands. Since 1995 Fort McMurray has been an urban service area within the Regional Municipality of Wood Buffalo, so planning and permitting are handled at the regional level. Distribution partners for Fort McMurray are being identified ahead of the Q4 2026 launch of the IS-04Z1.
Pre-launch · certification in progress · Launching Q4 2026
Short answer. Fort McMurray has no appointed SAMS distributor yet: the IS-04Z1 is pre-launch (certification in progress, no certificate issued, launch planned for Q4 2026), and distributor applications are open.
For the record, no certificate exists for the IS-04Z1 today. The programme is under way ahead of a Q4 2026 launch. Operator approval runs on its own timeline. Certification status. Place facts reviewed October 2026.
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Level of protection | ia, ib or ic matched to the zone | ib, for Zone 1 |
| Entity parameters | Uo, Io and Po within the device limits | Published with the certificate |
| Accessories | Chargers and cases certified with the device | Defined at certification |
| Where it applies | Fort McMurray: Diluent and fuel storage, In situ processing facilities, Bitumen extraction plants | Classified by the site operator |

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Fort McMurray. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
A short profile of the site and the kinds of classified area that matter for portable equipment.
The May 2016 wildfire forced the evacuation of about 88,000 people and halted production at facilities north of the city.
Winters average about -17 degrees C in January with extreme lows below -50 degrees C, so cold-rated batteries and equipment matter.
The Great Canadian Oil Sands plant, now Suncor, opened in 1967 and the town's population grew from 6,847 in 1971 to 31,000 by 1981 as more oil sands plants followed.
Fort McMurray is 435 km northeast of Edmonton on Highway 63 and about 60 km west of the Saskatchewan border, in boreal forest at the confluence of the Athabasca, Clearwater, Hangingstone and Horse rivers, at 370 m elevation.
The Syncrude mine began operating in 1978, after the 1973 oil crisis revived investor interest, making it the second oil sands mine in the Athabasca deposit after the Great Canadian Oil Sands plant.
The climate is borderline subarctic (Koppen Dfc) with severe winters except during chinook warm spells and only three months averaging above 10 C, so cold-weather performance of devices matters.
Intrinsic safety limits the electrical and thermal energy in a circuit so that neither a spark nor a hot surface can ignite a gas or dust atmosphere, even when a fault occurs. The ib level, used for Zone 1, tolerates one fault. It is the usual way to make a handheld device that a worker carries continuously through a hazardous area.
The IS-04Z1 is designed on this principle for Zone 1 and Zone 21 (marking target II 2 G Ex ib IIC T4). Intrinsic safety is a design basis, not a certificate: certification is in progress and none has been issued yet.
In Fort McMurray. Workers around Fort McMurray cover long distances between plants and rotate through shifts. A handheld intrinsically safe phone supports checklists, photos and communications while walking process areas. It does not take the place of the site's permit and gas-testing procedures, which remain the operator's responsibility.
A distributor for Fort McMurray would carry the IS-04Z1 after certification completes; the Q4 2026 launch is the planning date and no appointment has been made. SAMS reviews applicants one by one and prefers companies with their own Ex-competent technical and service staff, since certified devices must not be repaired outside approved channels.
No. Nothing can be bought or taken into a classified area today: certification is in progress and launch is planned for Q4 2026. What is available now is the datasheet, the written certification schedule and evaluation units for safe-area use.
There is no list price yet. SAMS gives indicative pre-launch pricing in writing, against a stated quantity and site, and does not commit to a lead time before certification completes.
The circuits are designed to limit energy so a spark or hot surface cannot ignite a gas or dust atmosphere, even with one fault (level ib, Zone 1). Certification of that design is in progress.
Likely candidates are bitumen extraction plants, upgrader units, diluent and fuel storage, in situ processing facilities. Which areas are classified, and to what zone, is set by the site operator's own area classification drawings.
Apply through the distributor page with your company details and the territory you cover. SAMS reviews applications company by company and has not yet granted a territory for Fort McMurray.
Typically upgraders, froth treatment, diluent and solvent systems, fuel storage and gas handling. Mines and camps are largely non-hazardous. Confirm the operator's zone map for the exact site.
Local planning is handled by the Regional Municipality of Wood Buffalo, while oil sands operations are regulated provincially. Confirm which approvals apply to your work with the operator or the municipality.
The May 2016 fire forced about 88,000 people to evacuate and halted production north of the city, so communications and evacuation planning are part of site safety. A managed phone can support that, but it does not replace alarms or muster systems. Ask each operator how devices fit into its emergency plan.
Related guides for Fort McMurray and for Canada.
Send the site, zone and gas group and roughly how many handsets. We reply by email with the datasheet and the certification schedule.
Tell us the zone, gas group and operator. We will send the datasheet and the certification schedule.