Germany: logistics and access
Germany imported 96% of its petroleum and 89% of its natural gas in 2025, and imports covered 65.6% of its total energy needs, so ports, pipelines and storage terminals are central.
The IS-04Z1 is an eigensicheres Smartphone designed to ATEX 2014/34/EU for Zone 1 and Zone 21, built for the chemical parks, refineries and pharmaceutical plants where most German Ex-Schutz work happens. This page sets out how an intrinsically safe cell phone supply route to Germany will work for the IS-04Z1, and what is and is not available before launch.
Pre-launch · certification in progress · Launching Q4 2026
Short answer. An intrinsically safe cell phone for Germany cannot be bought yet: the SAMS IS-04Z1 is pre-launch (certification in progress, no certificate issued), and the datasheet, certification schedule and safe-area evaluation units are available now.
Current position: certification in progress, nothing issued, launch targeted for Q4 2026. Operator approval runs on its own timeline. Certification status. Place facts reviewed October 2026.
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Level of protection | ia, ib or ic matched to the zone | ib, for Zone 1 |
| Entity parameters | Uo, Io and Po within the device limits | Published with the certificate |
| Accessories | Chargers and cases certified with the device | Defined at certification |
| Where it applies | Germany: Burghausen, Karlsruhe, Ludwigshafen | Classified by the site operator |

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Germany. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
Operators and classified areas drawn from the SAMS Germany market guide.
Germany imported 96% of its petroleum and 89% of its natural gas in 2025, and imports covered 65.6% of its total energy needs, so ports, pipelines and storage terminals are central.
Domestic hard coal production ended in 2018, so all hard coal is imported, adding port coal-handling and rail-transfer sites to Germany's dust-hazard areas.
Lignite is mined in the extreme west and east, mainly in North Rhine-Westphalia, Saxony and Brandenburg, and burned in plants near the mines, so dust and fuel-handling hazards cluster in those regions.
In 2025 transport accounted for about 31% of energy consumption, households 28% and industry 26%, so fuel distribution and storage form a large part of the infrastructure.
Intrinsic safety limits the electrical and thermal energy in a circuit so that neither a spark nor a hot surface can ignite a gas or dust atmosphere, even when a fault occurs. The ib level, used for Zone 1, tolerates one fault. It is the usual way to make a handheld device that a worker carries continuously through a hazardous area.
The IS-04Z1 is designed on this principle for Zone 1 and Zone 21 (marking target II 2 G Ex ib IIC T4). Intrinsic safety is a design basis, not a certificate: certification is in progress and none has been issued yet.
In Germany. At sites such as Ludwigshafen or Leverkusen, contractor teams turn over every few weeks and cross Zone 1 and Zone 21 boundaries often. An intrinsically safe handheld allows photographs, forms and checks at the plant without leaving the area. That is the design intent, pending certification and operator approval.
Supply of the IS-04Z1 to Germany starts only after certification, through authorised distributors. Until then a buyer can request the datasheet and the written certification schedule, and arrange a safe-area evaluation unit, which puts the site on the list for the right local channel at launch.
The technical specification, marking target and conditions of use, sent by email.
Which certificates are in progress, in what order, and what is still to be confirmed.
Evaluation units can be used for connectivity, MDM enrolment and workflow testing outside classified areas.
Tell us the site, zone, gas group and quantity so the right authorised distributor can contact you.
Not today. Until the certificates are issued the IS-04Z1 stays out of classified areas, and until launch there is nothing to purchase. You can ask for the datasheet and the certification schedule, or book a safe-area evaluation unit.
There is no list price yet. SAMS gives indicative pre-launch pricing in writing, against a stated quantity and site, and does not commit to a lead time before certification completes.
The circuits are designed to limit energy so a spark or hot surface cannot ignite a gas or dust atmosphere, even with one fault (level ib, Zone 1). Certification of that design is in progress.
The market guide for Germany covers Ludwigshafen, Leverkusen, Marl, Frankfurt Höchst, among others. Site-level pages are linked below.
Through authorised distributors once certificates exist. Until then SAMS can send the datasheet and certification schedule and arrange safe-area evaluation units.
Germany applies ATEX Directive 2014/34/EU for equipment and the employer-side Directive 1999/92/EC through national workplace law. Devices for Zone 1 and Zone 2 should carry CE and Ex markings with German-language instructions. Individual plants usually add their own device approval rules.
Typically the EU declaration of conformity, the ATEX or IECEx certificate, the Ex marking details and instructions in German. The operator's explosion protection document defines the zones. Provide a clear device marking photo so the site's inspector can match it to the zone.
Chemical park operators generally set contractor rules, including which devices are permitted in each zone. Requirements differ between parks. Ask the site operator about device approval, permits and registration, and about any managed-device policy, before bringing a handset to site.
Related guides for Germany and for Germany.
Send the site, zone and gas group and roughly how many handsets. We reply by email with the datasheet and the certification schedule.
Send the zone and gas group of your site and we will reply with the datasheet and schedule.