Hub at Fort McMurray
Fort McMurray is the commercial and administrative centre of the region and has an international airport with scheduled flights to Edmonton, Calgary, Vancouver and Toronto.
Canada's oil sands, mainly the Athabasca deposit in northern Alberta, are produced by open-pit mining with on-site upgrading and by in situ methods. Hydrocarbon processing and diluent handling create Zone 1 and Zone 2 locations. An IECEx smartphone distributor in Canada's oil sands would carry the IS-04Z1 to these buyers once certification completes.
Pre-launch · certification in progress · Launching Q4 2026
Short answer. Canada's oil sands has no appointed SAMS distributor yet: the IS-04Z1 is pre-launch (certification in progress, no certificate issued, launch planned for Q4 2026), and distributor applications are open.
Status: pre-launch. IECEx, ATEX, UKEX and NEC 500 certification is in progress and no certificate has been issued; launch is planned for Q4 2026. Operator approval runs on its own timeline. Certification status. Place facts reviewed October 2026.
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Certificate of conformity | Number checkable on the IECEx online register | In progress; not issued |
| Standards edition | The IEC 60079 edition the certificate cites | Stated on the certificate when issued |
| Schedule of conditions | Limits of use, batteries and accessories | Published with the certificate |
| Where it applies | Canada's oil sands: Diluent and naphtha handling, SAGD facilities, Bitumen extraction and froth treatment | Classified by the site operator |

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Canada Oil Sands. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
The companies on site and the hazardous-area types a handset is likely to meet there.
Fort McMurray is the commercial and administrative centre of the region and has an international airport with scheduled flights to Edmonton, Calgary, Vancouver and Toronto.
Fort McMurray's January average is about -17 degrees C, so batteries, touchscreens and seals are tested by winter conditions.
The Sturgeon Refinery, originally designed as an upgrader, also processes in-situ production from Cold Lake, while the CNOOC Long Lake upgrader is no longer in operation.
About 40 percent of oil sands bitumen is upgraded into synthetic crude before sale, mostly from mining operations, with a smaller share from in-situ producers.
The Athabasca, Peace River and Cold Lake oil sands deposits together lie under about 141,000 square kilometres of boreal forest and muskeg in northern Alberta, according to figures attributed to the provincial energy ministry and regulator.
Apart from Scotford, the upgraders are integrated with the mine's bitumen plant, and waste heat from product cooling heats process water for the adjacent mine, reducing natural gas use.
IECEx is the international scheme for certifying equipment used in explosive atmospheres. A certificate of conformity is issued by an accredited certification body against a specific edition of the IEC 60079 standards and carries a schedule of conditions of safe use. It is not a legal requirement in most countries on its own, but many national schemes accept it as the technical basis.
The IECEx certificate for the IS-04Z1 is in progress and has not been issued. The marking target is Ex ib IIC T4, the intrinsic safety concept for Zone 1 gas with the hardest gas group (IIC) and a 135 °C temperature class.
In Canada's oil sands. Syncrude, which is operated by Suncor, and the other major mines draw on international contractors and vendors. IECEx documentation, a certificate of conformity with its schedule of conditions, gives them a common reference. The IS-04Z1 is designed for that route, with certification in progress and no certificate issued.
A distributor for Canada's oil sands would carry the IS-04Z1 after certification completes; the Q4 2026 launch is the planning date and no appointment has been made. SAMS reviews applicants one by one and prefers companies with their own Ex-competent technical and service staff, since certified devices must not be repaired outside approved channels.
Not yet. The IS-04Z1 is pre-launch and its certification is still in progress ahead of a Q4 2026 launch. No unit goes into a classified area before the certificate covering it exists. The datasheet, the certification schedule and safe-area evaluation units are available now.
SAMS has not published a price. Any figure you are offered for an uncertified Ex phone should be treated with caution; written indicative pricing is available for a defined quantity and site.
No. The IECEx certificate is in progress and has not been issued. SAMS will publish the number when it exists.
Likely candidates are bitumen extraction and froth treatment, upgrader process units, diluent and naphtha handling, sagd facilities. Which areas are classified, and to what zone, is set by the site operator's own area classification drawings.
Apply through the distributor page with your company details and the territory you cover. SAMS reviews applications company by company and has not yet granted a territory for Canada's oil sands.
Mines mainly have fuel, diluent and froth treatment areas classified, while in-situ sites add steam plants, wellpads and produced gas handling. Upgraders have the widest classified zones. Confirm with each operator which areas need certified devices.
At integrated mines, upgrader and mine plants sit together and share heat, which can make the classified footprint larger and more complex to map. Confirm with the operator the zone drawings for the exact area you will work in.
Normally yes. Equipment is usually approved by the site operator's HSE or electrical authority and bought through its contractor channels. A manufacturer certificate would be one input, not the whole decision. Ask the operator what documents, zone ratings and trial steps it requires before deployment.
More on Canada Oil Sands, and on other places in Canada.
Send the site, zone and gas group and roughly how many handsets. We reply by email with the datasheet and the certification schedule.
Send the zone and gas group of your site and we will reply with the datasheet and schedule.