Large operators
Syncrude is owned by a joint venture in which Suncor holds the majority interest, and Suncor, Canadian Natural and Imperial run the major mines.
Alberta has five bitumen upgraders: four turn mined bitumen into synthetic crude and one produces mostly diesel from thermal in-situ bitumen, all handling flammable hydrocarbons at high temperature and pressure. Hydrocarbon processing and diluent handling create Zone 1 and Zone 2 locations. This page explains what to look for in an IECEx mobile phone for Canada's oil sands, and where the IS-04Z1 stands against that list today.
Pre-launch · certification in progress · Launching Q4 2026
Short answer. The SAMS IS-04Z1 is the intrinsically safe smartphone covered here for Canada's oil sands: pre-launch, designed for Zone 1 and Zone 21 (marking target Ex ib IIC T4), with certification in progress and no certificate issued.
Where things stand: the IS-04Z1 has not launched, and none of its four certification routes has produced a certificate yet. An operator's own vendor approval is a separate step. Certification status. Place facts reviewed October 2026.
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Certificate of conformity | Number checkable on the IECEx online register | In progress; not issued |
| Standards edition | The IEC 60079 edition the certificate cites | Stated on the certificate when issued |
| Schedule of conditions | Limits of use, batteries and accessories | Published with the certificate |
| Where it applies | Canada's oil sands: Bitumen extraction and froth treatment, Upgrader process units, Diluent and naphtha handling | Classified by the site operator |

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Canada Oil Sands. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
Who operates there and which kinds of classified area a handset would meet, from the SAMS site research.
Syncrude is owned by a joint venture in which Suncor holds the majority interest, and Suncor, Canadian Natural and Imperial run the major mines.
Fort McMurray is the commercial and administrative centre of the region and has an international airport with scheduled flights to Edmonton, Calgary, Vancouver and Toronto.
Outside Alberta there are two upgraders in Saskatchewan, the Lloydminster Upgrader and the NewGrade Upgrader, both processing Saskatchewan heavy oil.
Suncor's Upgrader 1 began commercial operation in 1967 at 50,000 bbl/d and was expanded to 110,000 bbl/d in 1998; Upgrader 2 followed in 2001, and expansions in 2005 and 2008 added 240,000 bbl/d.
The Sturgeon Refinery, originally designed as an upgrader, also processes in-situ production from Cold Lake, while the CNOOC Long Lake upgrader is no longer in operation.
About 40 percent of oil sands bitumen is upgraded into synthetic crude before sale, mostly from mining operations, with a smaller share from in-situ producers.
IECEx is the international scheme for certifying equipment used in explosive atmospheres. A certificate of conformity is issued by an accredited certification body against a specific edition of the IEC 60079 standards and carries a schedule of conditions of safe use. It is not a legal requirement in most countries on its own, but many national schemes accept it as the technical basis.
The IECEx certificate for the IS-04Z1 is in progress and has not been issued. The marking target is Ex ib IIC T4, the intrinsic safety concept for Zone 1 gas with the hardest gas group (IIC) and a 135 °C temperature class.
In Canada's oil sands. Syncrude, which is operated by Suncor, and the other major mines draw on international contractors and vendors. IECEx documentation, a certificate of conformity with its schedule of conditions, gives them a common reference. The IS-04Z1 is designed for that route, with certification in progress and no certificate issued.
A short checklist for anyone writing or reviewing the specification, with the IS-04Z1 status against each point.
Not today. Until the certificates are issued the IS-04Z1 stays out of classified areas, and until launch there is nothing to purchase. You can ask for the datasheet and the certification schedule, or book a safe-area evaluation unit.
No price is published. While certification is in progress there is no list price and no committed lead time, and a supplier quoting a firm figure for an uncertified Ex handset is promising something it cannot stand behind. Indicative pre-launch pricing is issued in writing against a stated quantity and site.
No. The IECEx certificate is in progress and has not been issued. SAMS will publish the number when it exists.
Likely candidates are bitumen extraction and froth treatment, upgrader process units, diluent and naphtha handling, sagd facilities. Which areas are classified, and to what zone, is set by the site operator's own area classification drawings.
Not exactly. Explosion proof is a broad everyday term; intrinsic safety is one protection concept, which limits energy so ignition cannot occur. Flameproof (Ex d) is a different concept that contains an explosion. The IS-04Z1 is intrinsically safe by design.
Often. Delayed coking and heavy oil processing involve hot surfaces and hydrocarbon fluids, so a device's T-class matters. Ask the operator for the area's gas group and maximum surface temperature requirement, and do not assume T4 is always sufficient.
Large plants do periodic maintenance outages that bring many contractors on site. Dates are operator-specific and often announced to suppliers early, so ask your operator contact about timing and device approval requirements for turnaround staff.
Suncor, Canadian Natural Resources and Imperial Oil run the major mines, and Syncrude is owned by a joint venture in which Suncor holds the majority interest. Cenovus is also a major in situ producer. Each has its own supplier prequalification, so a buyer should approach the operator's procurement and HSE teams directly.
More on Canada Oil Sands, and on other places in Canada.
Tell us what you need to equip and where. The SAMS team answers by email with the datasheet and where each certification route stands.
Tell us the zone, gas group and operator. We will send the datasheet and the certification schedule.