Yards
Seatrium offers construction, repair, upgrading and conversion of rigs, floaters and offshore platforms from its Singapore yards.
Singapore supports offshore oil and gas through rig and floating-unit work at Seatrium yards and through the Loyang Offshore Supply Base run by Toll Offshore Petroleum Services. Alongside the main Singapore yards, Seatrium operates offshore-specific yards at Crescent and Pandan, so rigs and floating units are fitted out at several locations. This page explains what to look for in a hazardous area smartphone for Singapore offshore support sector, and where the IS-04Z1 stands against that list today.
Pre-launch · certification in progress · Launching Q4 2026
Short answer. The SAMS IS-04Z1 is the intrinsically safe smartphone covered here for Singapore offshore support sector: pre-launch, designed for Zone 1 and Zone 21 (marking target Ex ib IIC T4), with certification in progress and no certificate issued.
Status: pre-launch. IECEx, ATEX, UKEX and NEC 500 certification is in progress and no certificate has been issued; launch is planned for Q4 2026. Operator approval runs on its own timeline. Certification status. Place facts reviewed October 2026.
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Zone | 0, 1 or 2 for gas; 20, 21 or 22 for dust | Designed for Zone 1 and Zone 21 |
| Gas group | IIA, IIB or IIC | IIC (target) |
| Area drawing | The operator's own classification drawing | Decided by the site operator |
| Where it applies | Singapore offshore support sector: Rig and floating-unit conversion, Offshore equipment repair workshops, Vessel mobilisation quays | Classified by the site operator |

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Singapore Offshore Operations. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
Who operates there and which kinds of classified area a handset would meet, from the SAMS site research.
Seatrium offers construction, repair, upgrading and conversion of rigs, floaters and offshore platforms from its Singapore yards.
TOPS lists a 970-metre wharf, workshops and storage for hazardous materials at Loyang, with hot works and afloat repairs among its services.
Seatrium was formed in 2023 when Sembcorp Marine took over Keppel Offshore & Marine and was renamed, and it runs shipyards in Singapore, Indonesia, the United Kingdom and Brazil.
The Loyang base covers 32 hectares and its wharf area can serve more than 11 vessels at once, with 24-hour manned security and video surveillance.
Toll Offshore Petroleum Services redeveloped its Loyang base in 2008 with an investment of about 325 million dollars, creating a dedicated offshore supply facility in eastern Singapore.
Equatorial heat and heavy showers affect open decks and yards throughout the year, so offshore equipment is prepared and tested in hot, humid conditions.
A hazardous area is a place where flammable gas, vapour or combustible dust may be present. Standards divide these into zones: Zones 0, 1 and 2 for gas and vapour, and Zones 20, 21 and 22 for dust. Zone 1 and Zone 21 are the tier where an explosive atmosphere is likely to occur in normal operation, which is where the IS-04Z1 is designed to work. Anything carried in must be marked for the zone, gas group and temperature class of the area.
No certificate has been issued for the IS-04Z1 yet, so it must not be taken into a classified area until the certificate covering it exists and the site operator has accepted it.
In Singapore offshore support sector. Hazardous areas here arise at FPSO and rig conversion, offshore equipment repair workshops, vessel mobilisation quays and supply base storage. Operators and yards classify them, and the picture changes as projects start and finish. SAMS does not classify areas, so a specifier should ask each project's safety team.
A short checklist for anyone writing or reviewing the specification, with the IS-04Z1 status against each point.
No. Nothing can be bought or taken into a classified area today: certification is in progress and launch is planned for Q4 2026. What is available now is the datasheet, the written certification schedule and evaluation units for safe-area use.
SAMS has not published a price. Any figure you are offered for an uncertified Ex phone should be treated with caution; written indicative pricing is available for a defined quantity and site.
Zone 1 and Zone 21 (gas and dust) with gas group IIC and temperature class T4, subject to certification. It must not be used in a classified area before its certificate is issued and the site has accepted it.
Likely candidates are rig and floating-unit conversion, offshore equipment repair workshops, vessel mobilisation quays, hazardous materials storage. Which areas are classified, and to what zone, is set by the site operator's own area classification drawings.
Not exactly. Explosion proof is a broad everyday term; intrinsic safety is one protection concept, which limits energy so ignition cannot occur. Flameproof (Ex d) is a different concept that contains an explosion. The IS-04Z1 is intrinsically safe by design.
As process systems, tanks and flare or vent systems are installed and commissioned, parts of the hull become classified areas, with zones growing as hydrocarbons are introduced. Before commissioning, rules are mostly about hot work and gas freeing. Ask the project HSE team where zones apply.
Common locations are the Loyang Offshore Supply Base in the east, where equipment is stored and shipped, and Seatrium's yards in the west, where rigs and FPSOs are built or converted. Each site sets its own access and permit rules.
Activity depends on the timing of rig and FPSO projects, so fleet size can change quickly. A managed device pool helps, but SAMS has no stock or lead times to quote because the IS-04Z1 is pre-launch. Plan any pilot well ahead of a project's peak.
More on Singapore Offshore Operations, and on other places in Singapore.
Send the site, zone and gas group and roughly how many handsets. We reply by email with the datasheet and the certification schedule.
Send the zone and gas group of your site and we will reply with the datasheet and schedule.