Bay logistics
FPSO hulls berth at the yard for integration, for example Cidade de Marica in 2015.
Niteroi lies across Guanabara Bay from Rio de Janeiro and is mainly a commercial city. Industry reports in 2025 said Hanwha Ocean was considering a shipyard in Niteroi to meet local-content requirements tied to Petrobras projects such as the FPSO P-86 tender. If you are specifying an explosion proof smartphone for Niteroi, this page covers the markings, the approvals and the current certification status of the IS-04Z1.
Pre-launch · certification in progress · Launching Q4 2026
Short answer. The SAMS IS-04Z1 is the intrinsically safe smartphone covered here for Niteroi: pre-launch, designed for Zone 1 and Zone 21 (marking target Ex ib IIC T4), with certification in progress and no certificate issued.
Current position: certification in progress, nothing issued, launch targeted for Q4 2026. Operator approval runs on its own timeline. Certification status. Place facts reviewed October 2026.
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Protection concept | Flameproof (Ex d) or intrinsic safety (Ex i) | Intrinsic safety, level ib |
| Zone suitability | Zone 1 gas and Zone 21 dust | Design target for Zone 1 and 21 |
| Certificate | Number, issuing body and schedule of conditions | In progress; not issued |
| Where it applies | Niteroi: FPSO module fabrication and integration, Shipyard tank and hull work, Fuel and gas handling at quaysides | Classified by the site operator |

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Niteroi. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
The companies on site and the hazardous-area types a handset is likely to meet there.
FPSO hulls berth at the yard for integration, for example Cidade de Marica in 2015.
Niteroi has a tropical monsoon climate with warm temperatures year-round and frequent rain.
The Mauá shipyard grew from a Niterói foundry and shipyard bought in 1846 by Baron of Mauá, and its 2000 joint venture with Jurong Shipyard added construction of oil and gas platforms.
The municipality contains part of the 2,400 hectare Serra da Tiririca State Park, created in 1991, which affects where new industrial or construction projects can be sited.
Niteroi has a tropical monsoon climate with warm to hot temperatures all year and relatively frequent rainfall, so humidity is a constant factor for equipment stored or used outdoors.
The Rio-Niterói Bridge, completed in 1974, is 13.29 km long and has a 72 m high central span so that ships can pass into Guanabara Bay, linking Niterói to Rio de Janeiro by road.
“Explosion proof” is the phrase most buyers use for equipment that may be taken into a classified hazardous area. Strictly, it covers several protection concepts: a flameproof enclosure (Ex d) contains an internal explosion, while intrinsic safety (Ex i) limits electrical energy so that an ignition cannot start. Phones are normally intrinsically safe, because a flameproof handset would be too heavy to carry all shift.
The IS-04Z1 uses intrinsic safety, with a marking target of Ex ib IIC T4, and is designed for Zone 1 and Zone 21. It is pre-launch, certification is in progress and no certificate has been issued.
In Niteroi. At the yard, explosion-proof loosely covers FPSO module fabrication and integration, tank and hull work and fuel and gas handling at quaysides. Fixed equipment may be Ex d, while a handheld relies on intrinsic safety. The IS-04Z1 is designed for that approach, pending certification.
A short checklist for anyone writing or reviewing the specification, with the IS-04Z1 status against each point.
Not today. Until the certificates are issued the IS-04Z1 stays out of classified areas, and until launch there is nothing to purchase. You can ask for the datasheet and the certification schedule, or book a safe-area evaluation unit.
No price is published. While certification is in progress there is no list price and no committed lead time, and a supplier quoting a firm figure for an uncertified Ex handset is promising something it cannot stand behind. Indicative pre-launch pricing is issued in writing against a stated quantity and site.
It is intrinsically safe (marking target Ex ib IIC T4), which is the usual way to make a phone for hazardous areas. It is not a flameproof (Ex d) design, and certification is still in progress.
Likely candidates are fpso module fabrication and integration, shipyard tank and hull work, fuel and gas handling at quaysides. Which areas are classified, and to what zone, is set by the site operator's own area classification drawings.
Not exactly. Explosion proof is a broad everyday term; intrinsic safety is one protection concept, which limits energy so ignition cannot occur. Flameproof (Ex d) is a different concept that contains an explosion. The IS-04Z1 is intrinsically safe by design.
Mainly shipyard and fabrication work: platform modules, power packages and vessel outfitting for the Campos and Santos basins. Hazardous areas arise on tanks, engine spaces and process modules, so zone definitions come from the yard's classification plan.
Niteroi faces Rio across Guanabara Bay and is connected by road bridge and ferry, so commuting between yards and Rio offices is common. Ask local logistics staff about peak traffic when scheduling deliveries of equipment.
The sheet notes that the latest sourced integrations are 2014-2015, so current workload is not confirmed. A buyer should ask the yard directly. Confirm approvals and documentation requirements with the site operator before planning a fleet.
Other guides for Niteroi, other places in Brazil, and the pages behind them.
Tell us what you need to equip and where. The SAMS team answers by email with the datasheet and where each certification route stands.
Name the site and the operator and we will send what is available before launch.