Borouge: who works there
The business has two parts: Abu Dhabi Polymers Company, the production company in Abu Dhabi, and Borouge Pte Ltd, which is based in Singapore.
Borouge is a polyolefins producer making polyethylene and polypropylene at Ruwais, founded in 1998 through a partnership between ADNOC and Borealis. The Borouge 4 expansion at Ruwais, agreed in 2021 for about 6.2 billion US dollars, was designed to add 1.4 million tonnes a year of polyethylene. Buyers searching for an ATEX and IECEx smartphone supplier for Borouge can take the datasheet and the certification schedule for the IS-04Z1 now; supply follows certification.
Pre-launch · certification in progress · Launching Q4 2026
Short answer. An ATEX and IECEx smartphone for Borouge cannot be bought yet: the SAMS IS-04Z1 is pre-launch (certification in progress, no certificate issued), and the datasheet, certification schedule and safe-area evaluation units are available now.
Where things stand: the IS-04Z1 has not launched, and none of its four certification routes has produced a certificate yet. Operator approval runs on its own timeline. Certification status. Place facts reviewed October 2026.
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Marking | II 2 G Ex ib IIC T4 on the rating plate | Design target; not yet marked |
| EU-type examination certificate | Notified body number and certificate ID | In progress with TÜV; not issued |
| IECEx certificate of conformity | Number listed on the IECEx online register | In progress; not issued |
| Where it applies | Borouge: Polyethylene and polypropylene plants, Cross-linked polyethylene (XLPE) plant, Polymer powder and pellet handling | Classified by the site operator |

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in United Arab Emirates. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
A short profile of its operations and the kinds of classified area that matter for portable equipment.
Borouge's e-procurement page directs suppliers to register on the ADNOC Commercial Directory (not applicable in Asia Pacific, where the local Borouge office is the contact); confirm current requirements with its procurement and HSE teams. The Ex certificate and an organisation's own vendor or engineering approval are two separate timelines; SAMS is working towards both and holds neither today.
The business has two parts: Abu Dhabi Polymers Company, the production company in Abu Dhabi, and Borouge Pte Ltd, which is based in Singapore.
In March 2025 ADNOC and OMV announced the merger of Borouge with Borealis and the acquisition of NOVA Chemicals, creating a polyolefins group ranked fourth in the world by capacity.
Borouge was founded in 1998 as a polyolefins joint venture of ADNOC and Borealis, and in 2022 it listed on the Abu Dhabi Securities Exchange, raising about 2 billion US dollars.
Borouge was reported to have a workforce of more than 3,100 people, so the Ruwais plants run as a staffed industrial site with its own induction and permit practice.
ATEX is the European legal framework for equipment used in explosive atmospheres (Directive 2014/34/EU). IECEx is the international certification scheme built on the IEC 60079 standards. Buyers outside Europe often ask for both: an IECEx certificate is the technical evidence most national regimes build on, while ATEX is the legal route into the European market.
For the IS-04Z1 both routes are in progress with TÜV in Germany and neither certificate has been issued. The marking target is II 2 G Ex ib IIC T4: equipment Group II (surface industry), Category 2 (Zone 1 gas), protection concept ib (intrinsic safety), gas group IIC and temperature class T4.
In Borouge. A Borouge reviewer at Ruwais would expect certificate evidence naming the exact model and marking for its ethane cracker and polymer plants. International contractors on the Borouge 4 expansion may carry ATEX or IECEx papers, so a dual route helps comparison. The IS-04Z1 programme is in progress.
There is no stock to order for Borouge yet. The IS-04Z1 is pre-launch, certification is in progress, and supply will run through authorised distributors after the certificates are issued. Procurement teams can prepare now with the datasheet, the certification schedule and a safe-area evaluation.
The technical specification, marking target and conditions of use, sent by email.
Which certificates are in progress, in what order, and what is still to be confirmed.
Evaluation units can be used for connectivity, MDM enrolment and workflow testing outside classified areas.
Tell us the site, zone, gas group and quantity so the right authorised distributor can contact you.
No. Nothing can be bought or taken into a classified area today: certification is in progress and launch is planned for Q4 2026. What is available now is the datasheet, the written certification schedule and evaluation units for safe-area use.
No price is published. While certification is in progress there is no list price and no committed lead time, and a supplier quoting a firm figure for an uncertified Ex handset is promising something it cannot stand behind. Indicative pre-launch pricing is issued in writing against a stated quantity and site.
Not yet. Both routes are in progress with TÜV in Germany and no certificate has been issued. Any listing that says otherwise is wrong.
Borouge's e-procurement page directs suppliers to register on the ADNOC Commercial Directory (not applicable in Asia Pacific, where the local Borouge office is the contact); confirm current requirements with its procurement and HSE teams.
Through authorised distributors once certificates exist. Until then SAMS can send the datasheet and certification schedule and arrange safe-area evaluation units.
Ethane cracker and polyethylene and polypropylene units typically have flammable gas zones around reactors, compressors and storage, and powder and pellet handling brings combustible dust zones. Borouge classifies each unit, so ask for the area drawing, gas and dust group and temperature class.
Since 31 March 2026 Borouge Plc has been part of Borouge Group International AG, formed from Borouge, Borealis and NOVA Chemicals. Supplier registration may now follow group processes, so confirm current requirements with Borouge procurement and HSE before assuming older procedures still apply.
The sheet's start-up status for Borouge 4 comes only from a search snippet, so it should not be assumed. It describes the Ruwais complex as being expanded with a new ethane cracker and polyethylene plants. Confirm current status with Borouge. The IS-04Z1 is pre-launch with no certificate.
Other guides for Borouge, other places in United Arab Emirates, and the pages behind them.
Share the site details and quantity. You will get the datasheet and the certification schedule back by email; pricing is indicative only until launch.
Name the site and the operator and we will send what is available before launch.