ADNOC: who works there
ADNOC Drilling, formerly National Drilling Company, is ADNOC's oldest subsidiary and the largest drilling company in the Middle East, drilling both onshore and offshore in Abu Dhabi.
ADNOC is the Abu Dhabi state-owned energy group, with subsidiaries across upstream, midstream and downstream activities including refining, gas processing and petrochemicals. In May 2026 ADNOC announced it would accelerate its West-East Pipeline project, doubling oil export capacity through the port of Fujairah, with the expanded line expected to operate by 2027. Buyers searching for an ATEX and IECEx smartphone supplier for ADNOC can take the datasheet and the certification schedule for the IS-04Z1 now; supply follows certification.
Pre-launch · certification in progress · Launching Q4 2026
Short answer. An ATEX and IECEx smartphone for ADNOC cannot be bought yet: the SAMS IS-04Z1 is pre-launch (certification in progress, no certificate issued), and the datasheet, certification schedule and safe-area evaluation units are available now.
Where things stand: the IS-04Z1 has not launched, and none of its four certification routes has produced a certificate yet. An operator's own vendor approval is a separate step. Certification status. Place facts reviewed October 2026.
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Marking | II 2 G Ex ib IIC T4 on the rating plate | Design target; not yet marked |
| EU-type examination certificate | Notified body number and certificate ID | In progress with TÜV; not issued |
| IECEx certificate of conformity | Number listed on the IECEx online register | In progress; not issued |
| Where it applies | ADNOC: Refinery process units, NGL fractionation, Offshore production facilities | Classified by the site operator |

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in United Arab Emirates. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
A short profile of its operations and the kinds of classified area that matter for portable equipment.
ADNOC's website links suppliers to the ADNOC Supplier Hub, which has a supplier registration service and an In-Country Value (ICV) programme section; the page content could not be read in full, so confirm current requirements with the relevant group company. The Ex certificate and an organisation's own vendor or engineering approval are two separate timelines; SAMS is working towards both and holds neither today.
ADNOC Drilling, formerly National Drilling Company, is ADNOC's oldest subsidiary and the largest drilling company in the Middle East, drilling both onshore and offshore in Abu Dhabi.
ADNOC was founded in 1971 and now has 16 subsidiary companies across upstream, midstream and downstream activities, so site practice can differ from one group company to another.
ADNOC Industrial Gas, founded in 2007 with Linde, makes industrial gases used by the oil, gas and petrochemical industries and works closely with gas processing.
A joint venture between ADNOC (60 per cent) and ADQ (40 per cent) was launched in 2020 to invest in chemicals projects in the planned Ruwais Derivatives Park.
ATEX is the European legal framework for equipment used in explosive atmospheres (Directive 2014/34/EU). IECEx is the international certification scheme built on the IEC 60079 standards. Buyers outside Europe often ask for both: an IECEx certificate is the technical evidence most national regimes build on, while ATEX is the legal route into the European market.
For the IS-04Z1 both routes are in progress with TÜV in Germany and neither certificate has been issued. The marking target is II 2 G Ex ib IIC T4: equipment Group II (surface industry), Category 2 (Zone 1 gas), protection concept ib (intrinsic safety), gas group IIC and temperature class T4.
In ADNOC. An ADNOC procurement or HSE reviewer would expect certificate evidence naming the exact model and marking, as the group spans fields, gas processing, refining and petrochemicals. International contractors across group companies bring ATEX or IECEx papers, so a dual route helps. The IS-04Z1 programme is in progress.
Nothing can be bought for ADNOC today: the IS-04Z1 is pre-launch, and SAMS will supply end users through authorised distributors once certificates exist. What a buyer can do now is take the specification, ask for the written certification schedule and arrange a safe-area evaluation, so that the right local channel contacts you at launch.
The technical specification, marking target and conditions of use, sent by email.
Which certificates are in progress, in what order, and what is still to be confirmed.
Evaluation units can be used for connectivity, MDM enrolment and workflow testing outside classified areas.
Tell us the site, zone, gas group and quantity so the right authorised distributor can contact you.
No. Nothing can be bought or taken into a classified area today: certification is in progress and launch is planned for Q4 2026. What is available now is the datasheet, the written certification schedule and evaluation units for safe-area use.
There is no list price yet. SAMS gives indicative pre-launch pricing in writing, against a stated quantity and site, and does not commit to a lead time before certification completes.
Not yet. Both routes are in progress with TÜV in Germany and no certificate has been issued. Any listing that says otherwise is wrong.
ADNOC's website links suppliers to the ADNOC Supplier Hub, which has a supplier registration service and an In-Country Value (ICV) programme section; the page content could not be read in full, so confirm current requirements with the relevant group company.
Through authorised distributors once certificates exist. Until then SAMS can send the datasheet and certification schedule and arrange safe-area evaluation units.
Das Island and offshore platforms involve marine transfer, salt air, high humidity and strong heat, plus controlled access by boat or helicopter. Check corrosion resistance, ingress protection and temperature range, and ask the operator about transfer rules and any restrictions on batteries or devices.
Typically gas processing trains, LNG and NGL units, refinery process areas, petrochemical plants and offshore platforms. Each ADNOC group company classifies its own facilities, so request the hazardous-area drawing, gas group and temperature class from the specific operating company before choosing equipment.
The sheet says suppliers are directed to ADNOC's supplier registration (the ADNOC Commercial Directory, now under its Supplier Hub) for Group tenders, and an In-Country Value certificate is generally required, per third-party guides. Confirm with the relevant group company. The IS-04Z1 has no certificate.
Other guides for ADNOC, other places in United Arab Emirates, and the pages behind them.
Share the site details and quantity. You will get the datasheet and the certification schedule back by email; pricing is indicative only until launch.
Name the site and the operator and we will send what is available before launch.