Lindsey
Lindsey closed in 2025 after owner Prax became insolvent; Phillips 66 agreed in January 2026 to acquire assets but said it will not restart it as a standalone refinery.
England · ATEX and IECEx
ATEX and IECEx Smartphone Distributor in England
England hosts three of the UK's four operating refineries, Fawley, Stanlow and Humber, with Pembroke in Wales the fourth. COMAH 2015 is enforced by a joint Competent Authority: HSE, or the Office for Nuclear Regulation for nuclear sites, working with the Environment Agency in England, Natural Resources Wales or SEPA in Scotland. Distribution partners for England are being identified ahead of the Q4 2026 launch of the IS-04Z1.
Pre-launch · certification in progress · Launching Q4 2026
Marking targetEx ib IIC T4Intrinsic safety, Zone 1 / 21 design target · certification in progress
AvailabilityQ4 2026via authorised distributors
Search topicATEX and IECEx
DeviceSmartphone
RouteDistribution
WhereEngland
Short answer. England has no appointed SAMS distributor yet: the IS-04Z1 is pre-launch (certification in progress, no certificate issued, launch planned for Q4 2026), and distributor applications are open.
Status: pre-launch. IECEx, ATEX, UKEX and NEC 500 certification is in progress and no certificate has been issued; launch is planned for Q4 2026. An operator's own vendor approval is a separate step. Certification status. Place facts reviewed October 2026.
At a glance · ATEX and IECEx
Checklist: ATEX and IECEx smartphone for England
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Marking | II 2 G Ex ib IIC T4 on the rating plate | Design target; not yet marked |
| EU-type examination certificate | Notified body number and certificate ID | In progress with TÜV; not issued |
| IECEx certificate of conformity | Number listed on the IECEx online register | In progress; not issued |
| Where it applies | England: Marine oil jetties, Petrochemical units, Refinery process units | Classified by the site operator |
Product · England
The product behind this search: the SAMS IS-04Z1.
SAMS IS-04Z1
An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in England. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
- IP68 sealed
- 4,000 mAh battery
- 50 MP camera
- Android 16
- Zone 1 / Zone 21 design target
The site · England
England at a glance: who is there, what is classified
A short profile of the site and the kinds of classified area that matter for portable equipment.
Operators and companies on site
- ExxonMobil
- EET Fuels (Essar)
- Phillips 66
Classified areas to expect
- Refinery process units
- Fuel terminals and tank farms
- Marine oil jetties
- Petrochemical units
Local conditions · England
What England means for portable equipment
Regulation
DSEAR applies, and the UK recognises CE marking alongside UKCA for Great Britain, with the recognition period currently running to 31 December 2027.
Field notes · England
More about England that matters for portable equipment
England: rules and approvals
In Great Britain, the 2016 EPS Regulations implement the ATEX equipment directive, and the UK government has extended recognition of goods meeting EU requirements, including CE marking, indefinitely beyond 2024 for many products, in force from 1 October 2024.
England: rules and approvals
The Dangerous Substances and Explosive Atmospheres Regulations 2002, known as DSEAR, require employers to control risks to safety from fire, explosion and substances corrosive to metals in the workplace.
England: who works there
Employers must also prepare plans for accidents and emergencies and make sure staff are informed and trained to deal with dangerous-substance risks, which is why site inductions usually cover equipment rules.
England: projects and investment
Major-hazard sites fall under the Control of Major Accident Hazards Regulations 2015, with HSE publishing guidance and public information on establishments covered, so top-tier and lower-tier sites follow a further regime.
The term · ATEX and IECEx
What “ATEX and IECEx” means for a smartphone
ATEX is the European legal framework for equipment used in explosive atmospheres (Directive 2014/34/EU). IECEx is the international certification scheme built on the IEC 60079 standards. Buyers outside Europe often ask for both: an IECEx certificate is the technical evidence most national regimes build on, while ATEX is the legal route into the European market.
For the IS-04Z1 both routes are in progress with TÜV in Germany and neither certificate has been issued. The marking target is II 2 G Ex ib IIC T4: equipment Group II (surface industry), Category 2 (Zone 1 gas), protection concept ib (intrinsic safety), gas group IIC and temperature class T4.
In England. Across England, an HSE or procurement reviewer typically expects equipment evidence matched to the employer's DSEAR assessment. Refinery and terminal operators at Fawley, Stanlow and Humber also employ international contractors who carry ATEX or IECEx paperwork. A dual route is designed to serve both. Both certifications are in progress for SAMS and none has been issued.
The route · distribution
Distributing the IS-04Z1 in England
SAMS is appointing authorised distributors ahead of the Q4 2026 launch. No territory has been granted for England yet and applications are reviewed company by company. Because a certified Ex device cannot be opened by an ordinary phone workshop without invalidating its certificate, SAMS looks for partners who can provide competent technical support and after-sales service locally.
What SAMS looks for in a partner
- Operator relationships
- Existing supplier registrations or a clear route to them with the main operators and contractors in England.
- Ex-competent staff
- People who understand zone classification, markings and the conditions of a certificate.
And equally important
- Local-language support
- Documentation, training and helpdesk in the languages the workforce uses.
- Service capability
- Spares, battery replacement and repair routed through SAMS-approved channels.
Questions · England
Frequently asked questions
Can we buy an ATEX and IECEx smartphone in England today?
Not yet. The IS-04Z1 is pre-launch and its certification is still in progress ahead of a Q4 2026 launch. No unit goes into a classified area before the certificate covering it exists. The datasheet, the certification schedule and safe-area evaluation units are available now.
What does an ATEX and IECEx smartphone in England cost?
SAMS has not published a price. Any figure you are offered for an uncertified Ex phone should be treated with caution; written indicative pricing is available for a defined quantity and site.
Is the IS-04Z1 ATEX and IECEx certified?
Not yet. Both routes are in progress with TÜV in Germany and no certificate has been issued. Any listing that says otherwise is wrong.
Which areas at England would use it?
Likely candidates are refinery process units, fuel terminals and tank farms, marine oil jetties, petrochemical units. Which areas are classified, and to what zone, is set by the site operator's own area classification drawings.
How do I become a SAMS distributor for England?
Apply through the distributor page with your company details and the territory you cover. SAMS reviews applications company by company and has not yet granted a territory for England.
Does COMAH affect which equipment I can use?
COMAH applies to major-hazard sites such as large chemical and fuel storage establishments and adds management duties on top of DSEAR. Each operator typically sets its own rules for portable electronics, so check the site's permit and induction requirements.
Which regulations govern portable electronics in explosive atmospheres in England?
The Dangerous Substances and Explosive Atmospheres Regulations 2002 require employers to classify hazardous areas and avoid ignition sources. Equipment choice is then based on the zone, gas group and temperature class, so ask the site for its hazardous-area register.
Does the UK accept CE marking or only UKCA?
Guidance says CE marking is recognised alongside UKCA for Great Britain, with the recognition period currently running to 31 December 2027, and that date may change. Buyers should check the current gov.uk guidance and ask their operator's procurement team what evidence they require.
Related guides
Keep exploring
Related guides for England and for United Kingdom.
IECEx Mobile Phone Distributor in EnglandSame place, different guide
Ex-Proof Mobile Phone Distributor in EnglandSame place, different guide
Intrinsically Safe Mobile Phone in EnglandSame place, different guide
Industrial Mobile Phone Distributor in EnglandSame place, different guide
Rugged Mobile Phone in EnglandSame place, different guide
Hazardous Area Mobile Phone in EnglandSame place, different guide
ATEX and IECEx Mobile Phone Distributor in Northern IrelandElsewhere in United Kingdom
ATEX and IECEx Mobile Phone Distributor in ScotlandElsewhere in United Kingdom
ATEX and IECEx Mobile Phone Distributor in LondonElsewhere in United Kingdom
ATEX and IECEx Mobile Phone Distributor in CardiffElsewhere in United Kingdom
United Kingdom market guideCertification route and regulators
All guides for United KingdomEvery route we cover
Certification statusWhat is in progress
Enquiry · England
Ask about the IS-04Z1 for England, United Kingdom
Share the site details and quantity. You will get the datasheet and the certification schedule back by email; pricing is indicative only until launch.
Enquiry · England
Launching Q4 2026
Planning for England?
Name the site and the operator and we will send what is available before launch.