Operating refineries
Reported capacities are roughly 270,000 barrels a day at ExxonMobil's Fawley on Southampton Water, about 296,000 at Stanlow in Cheshire and about 221,000 at Phillips 66's Humber site in North Lincolnshire.
England hosts three of the UK's four operating refineries, Fawley, Stanlow and Humber, with Pembroke in Wales the fourth. Classified areas also occur at fuel terminals, gas networks and chemical sites. Lindsey stopped refining in 2025. An Ex-proof mobile phone distributor in England would carry the IS-04Z1 to these buyers once certification completes.
Pre-launch · certification in progress · Launching Q4 2026
Short answer. England has no appointed SAMS distributor yet: the IS-04Z1 is pre-launch (certification in progress, no certificate issued, launch planned for Q4 2026), and distributor applications are open.
For the record, no certificate exists for the IS-04Z1 today. The programme is under way ahead of a Q4 2026 launch. An operator's own vendor approval is a separate step. Certification status. Place facts reviewed October 2026.
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Ex marking | Group, category, protection concept, gas group, temperature class | II 2 G Ex ib IIC T4 (target) |
| Gas group | IIA, IIB or IIC matched to the area drawing | IIC (target) |
| Temperature class | T-class below the ignition temperature of the gas | T4, 135 °C (target) |
| Where it applies | England: Marine oil jetties, Petrochemical units, Refinery process units | Classified by the site operator |

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in England. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
A short profile of the site and the kinds of classified area that matter for portable equipment.
Reported capacities are roughly 270,000 barrels a day at ExxonMobil's Fawley on Southampton Water, about 296,000 at Stanlow in Cheshire and about 221,000 at Phillips 66's Humber site in North Lincolnshire.
Lindsey closed in 2025 after owner Prax became insolvent; Phillips 66 agreed in January 2026 to acquire assets but said it will not restart it as a standalone refinery.
DSEAR duties fall on employers and the self-employed and also protect members of the public who may be put at risk by work activity, so contractors share responsibility with site owners.
In Great Britain, the 2016 EPS Regulations implement the ATEX equipment directive, and the UK government has extended recognition of goods meeting EU requirements, including CE marking, indefinitely beyond 2024 for many products, in force from 1 October 2024.
The Dangerous Substances and Explosive Atmospheres Regulations 2002, known as DSEAR, require employers to control risks to safety from fire, explosion and substances corrosive to metals in the workplace.
Employers must also prepare plans for accidents and emergencies and make sure staff are informed and trained to deal with dangerous-substance risks, which is why site inductions usually cover equipment rules.
“Ex-proof” is shorthand for equipment carrying an explosion-protection marking (the Ex mark) that matches the area it enters. The marking states the protection concept, gas or dust group and temperature class, and it must be backed by a certificate issued by a recognised body, so a phone described as Ex-proof should come with a certificate number you can check.
The IS-04Z1 is designed to carry the marking II 2 G Ex ib IIC T4. That is a target: certification is in progress, no certificate has been issued, and SAMS will publish the certificate numbers when they exist.
In England. A marking check at an English refinery would compare each area's classification with the equipment label, covering zone, gas group and temperature class. Petrochemical units may call for IIC, whereas fuel areas are usually a lower group. The IS-04Z1 target marking is II 2 G Ex ib IIC T4, pending certification, so confirm it against the operator's list.
SAMS is appointing authorised distributors ahead of the Q4 2026 launch. No territory has been granted for England yet and applications are reviewed company by company. Because a certified Ex device cannot be opened by an ordinary phone workshop without invalidating its certificate, SAMS looks for partners who can provide competent technical support and after-sales service locally.
Not yet. The IS-04Z1 is pre-launch and its certification is still in progress ahead of a Q4 2026 launch. No unit goes into a classified area before the certificate covering it exists. The datasheet, the certification schedule and safe-area evaluation units are available now.
No price is published. While certification is in progress there is no list price and no committed lead time, and a supplier quoting a firm figure for an uncertified Ex handset is promising something it cannot stand behind. Indicative pre-launch pricing is issued in writing against a stated quantity and site.
The marking target is II 2 G Ex ib IIC T4. It becomes a marking only when the certificate is issued; until then it is a design target.
Likely candidates are refinery process units, fuel terminals and tank farms, marine oil jetties, petrochemical units. Which areas are classified, and to what zone, is set by the site operator's own area classification drawings.
Apply through the distributor page with your company details and the territory you cover. SAMS reviews applications company by company and has not yet granted a territory for England.
COMAH applies to major-hazard sites such as large chemical and fuel storage establishments and adds management duties on top of DSEAR. Each operator typically sets its own rules for portable electronics, so check the site's permit and induction requirements.
The Dangerous Substances and Explosive Atmospheres Regulations 2002 require employers to classify hazardous areas and avoid ignition sources. Equipment choice is then based on the zone, gas group and temperature class, so ask the site for its hazardous-area register.
Guidance says CE marking is recognised alongside UKCA for Great Britain, with the recognition period currently running to 31 December 2027, and that date may change. Buyers should check the current gov.uk guidance and ask their operator's procurement team what evidence they require.
Related guides for England and for United Kingdom.
Send the site, zone and gas group and roughly how many handsets. We reply by email with the datasheet and the certification schedule.
Send the zone and gas group of your site and we will reply with the datasheet and schedule.