France: rules and approvals
ATEX has two equipment groups, Group I for mining and Group II for surface industries, and CE plus Ex marking lets compliant equipment be sold anywhere in the EU, including France.
The IS-04Z1 is an intrinsically safe Android handset designed for Zone 1 and Zone 21, aimed at the refineries, chemical platforms and LNG terminals that make up the French Seveso estate. If you are specifying a rugged smartphone for France, this page covers the markings, the approvals and the current certification status of the IS-04Z1.
Pre-launch · certification in progress · Launching Q4 2026
Short answer. The SAMS IS-04Z1 is the intrinsically safe smartphone covered here for France: pre-launch, designed for Zone 1 and Zone 21 (marking target Ex ib IIC T4), with certification in progress and no certificate issued.
For the record, no certificate exists for the IS-04Z1 today. The programme is under way ahead of a Q4 2026 launch. An operator's own vendor approval is a separate step. Certification status. Place facts reviewed October 2026.
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Ingress protection | IP65 to IP68 sealing | IP68 design |
| Drop and shock | A stated drop height onto concrete | Specification on request |
| Explosion protection | A separate certificate and marking | In progress; not issued |
| Where it applies | France: Gonfreville-l'Orcher, Port-Jérôme, Donges | Classified by the site operator |

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in France. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
The main operators, industrial areas and sites that the SAMS France market guide covers.
ATEX has two equipment groups, Group I for mining and Group II for surface industries, and CE plus Ex marking lets compliant equipment be sold anywhere in the EU, including France.
Fos-sur-Mer lies about 50 km north-west of Marseille on the Mediterranean coast, west of the Etang de Berre, and hosts a major port development run by the Autonomous Port of Marseille.
Fos-sur-Mer's port includes container terminals and a methane terminal, and its waterside industrial zone attracts steel, chemical and oil industry sites, making it a typical mixed-hazard industrial coast.
In 2022 France announced plans to build six new reactors, reversing a 2014 plan to reduce nuclear supply, which points to long-running construction and maintenance work.
A rugged phone is built to survive water, dust, drops and rough handling, usually rated by an IP code and a drop specification. Ruggedness is an environmental property: it says nothing about whether a phone may be used where flammable gas or dust is present. That is decided by explosion-protection certification and marking.
The IS-04Z1 combines both: an IP68 sealed rugged build and a design for Zone 1 and Zone 21 (marking target Ex ib IIC T4). The explosion-protection certificates are in progress and none has been issued.
In France. From the Étang de Berre and the Loire estuary to the Rhône valley, French plateformes face heat, wind and coastal salt air at some sites. IP68 sealing helps with water and dust ingress and suits washdowns and rain. It is not an explosion-protection rating; that must come from certification and the zone marking.
A short checklist for anyone writing or reviewing the specification, with the IS-04Z1 status against each point.
No. Nothing can be bought or taken into a classified area today: certification is in progress and launch is planned for Q4 2026. What is available now is the datasheet, the written certification schedule and evaluation units for safe-area use.
No price is published. While certification is in progress there is no list price and no committed lead time, and a supplier quoting a firm figure for an uncertified Ex handset is promising something it cannot stand behind. Indicative pre-launch pricing is issued in writing against a stated quantity and site.
It is designed to IP68 sealing, with glove-friendly controls. Ruggedness is not explosion protection: that depends on the certificates, which are in progress.
The market guide for France covers Gonfreville-l'Orcher, Port-Jérôme, Donges, Montoir-de-Bretagne, among others. Site-level pages are linked below.
Not exactly. Explosion proof is a broad everyday term; intrinsic safety is one protection concept, which limits energy so ignition cannot occur. Flameproof (Ex d) is a different concept that contains an explosion. The IS-04Z1 is intrinsically safe by design.
French is generally expected for instructions and safety documentation at French sites, and ATEX user instructions are typically required in the language of the destination country. International operators may also accept English. Ask the site contact which language they require for contractor equipment files.
Large reactor outages bring many contractors at once, so site access, induction and equipment registration can be tightly scheduled. Nuclear sites also have conventional hazardous areas, for example for hydrogen and fuel stores, so agree device approval early with the plant's safety office.
Zones and rules are set by the site operator and can differ between units on the same platform. A device would need a marking suitable for each zone it enters. Check the zone plan and permit rules with the platform operator before carrying a handset in.
Related guides for France and for France.
Tell us what you need to equip and where. The SAMS team answers by email with the datasheet and where each certification route stands.
Tell us the zone, gas group and operator. We will send the datasheet and the certification schedule.