France: industry on the ground
Fos-sur-Mer's port includes container terminals and a methane terminal, and its waterside industrial zone attracts steel, chemical and oil industry sites, making it a typical mixed-hazard industrial coast.
The IS-04Z1 is an intrinsically safe Android handset designed for Zone 1 and Zone 21, aimed at the refineries, chemical platforms and LNG terminals that make up the French Seveso estate. The Lacq gas field in Nouvelle-Aquitaine was discovered in 1950 and began production in 1958; its sour gas comes from about 4,000 metres depth. Distribution partners for France are being identified ahead of the Q4 2026 launch of the IS-04Z1.
Pre-launch · certification in progress · Launching Q4 2026
Short answer. France has no appointed SAMS distributor yet: the IS-04Z1 is pre-launch (certification in progress, no certificate issued, launch planned for Q4 2026), and distributor applications are open.
Where things stand: the IS-04Z1 has not launched, and none of its four certification routes has produced a certificate yet. An operator's own vendor approval is a separate step. Certification status. Place facts reviewed October 2026.
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Level of protection | ia, ib or ic matched to the zone | ib, for Zone 1 |
| Entity parameters | Uo, Io and Po within the device limits | Published with the certificate |
| Accessories | Chargers and cases certified with the device | Defined at certification |
| Where it applies | France: Donges, Montoir-de-Bretagne, Feyzin and the Vallée de la Chimie | Classified by the site operator |

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in France. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
The classified areas, operators and sites below are the ones covered in the SAMS France market guide.
Fos-sur-Mer's port includes container terminals and a methane terminal, and its waterside industrial zone attracts steel, chemical and oil industry sites, making it a typical mixed-hazard industrial coast.
In 2022 France announced plans to build six new reactors, reversing a 2014 plan to reduce nuclear supply, which points to long-running construction and maintenance work.
Nuclear power produces around 70% of France's electricity from 56 active reactors in 2023, so large plant outages bring many contractors to a small number of sites.
Le Havre is France's second-largest commercial port by tonnage and its largest for containers, managed since 2008 by the state agency Grand Port Maritime du Havre, a key entry point for imported equipment.
Intrinsic safety limits the electrical and thermal energy in a circuit so that neither a spark nor a hot surface can ignite a gas or dust atmosphere, even when a fault occurs. The ib level, used for Zone 1, tolerates one fault. It is the usual way to make a handheld device that a worker carries continuously through a hazardous area.
The IS-04Z1 is designed on this principle for Zone 1 and Zone 21 (marking target II 2 G Ex ib IIC T4). Intrinsic safety is a design basis, not a certificate: certification is in progress and none has been issued yet.
In France. A grand arrêt on a French refinery or chemical platform puts large contractor crews through many zones in a short window. An intrinsically safe handheld lets inspectors photograph, record and sign off at the point of work. That is the design intent; the device is not yet certified.
Distribution of the IS-04Z1 is by authorised partners only, and SAMS has not yet granted a territory for France. Each application is reviewed on its merits. Because opening a certified Ex handset in an ordinary workshop invalidates its certificate, the partner must be able to support and service the device locally.
No. Nothing can be bought or taken into a classified area today: certification is in progress and launch is planned for Q4 2026. What is available now is the datasheet, the written certification schedule and evaluation units for safe-area use.
No price is published. While certification is in progress there is no list price and no committed lead time, and a supplier quoting a firm figure for an uncertified Ex handset is promising something it cannot stand behind. Indicative pre-launch pricing is issued in writing against a stated quantity and site.
The circuits are designed to limit energy so a spark or hot surface cannot ignite a gas or dust atmosphere, even with one fault (level ib, Zone 1). Certification of that design is in progress.
The market guide for France covers Gonfreville-l'Orcher, Port-Jérôme, Donges, Montoir-de-Bretagne, among others. Site-level pages are linked below.
Apply through the distributor page with your company details and the territory you cover. SAMS reviews applications company by company and has not yet granted a territory for France.
The Fos-sur-Mer and Marseille coast combines a gas terminal, steel, chemistry and oil industries, and the country also has many nuclear and hydro sites. Details of individual plants and zones come from each operator, so request their site layout and approval procedure.
Yes, as an EU member France applies ATEX Directive 2014/34/EU to equipment and zoning under Directive 1999/92/EC. Zone 1 or Zone 2 devices should carry CE and Ex markings with instructions in French. Operators usually add their own approval and permit rules.
Android lets the interface language be set per user, and a fleet can be managed through EMM or MDM. Confirm the exact language support and any locked configuration on the datasheet. Contractor crews often prefer a common set-up agreed before a shutdown.
Other guides for France, other places in France, and the pages behind them.
Share the site details and quantity. You will get the datasheet and the certification schedule back by email; pricing is indicative only until launch.
Send the zone and gas group of your site and we will reply with the datasheet and schedule.