South Africa: rules and approvals
ICASA, based in Centurion, sets radio type approval, relying on EU test reports for spectrum, EMC and electrical safety, and a conformity label must be affixed to the equipment and the packaging.
South Africa · intrinsically safe
Intrinsically Safe Smartphone Distributor in South Africa
A Zone 1 / Zone 21 smartphone for crews at the Secunda and Sasolburg complexes, the Natref and Cape Town refineries, Mossel Bay, the fuel terminals and the surface plants of South African mining. The code references a family of SANS standards, including SANS 10086 on installation, inspection and maintenance of equipment in explosive atmospheres, SANS 1489 on connectors and SANS 1515 on gas measuring equipment for mines. Distribution partners for South Africa are being identified ahead of the Q4 2026 launch of the IS-04Z1.
Pre-launch · certification in progress · Launching Q4 2026
Marking targetEx ib IIC T4Intrinsic safety, Zone 1 / 21 design target · certification in progress
AvailabilityQ4 2026via authorised distributors
Search topicintrinsically safe
DeviceSmartphone
RouteDistribution
WhereSouth Africa
Short answer. South Africa has no appointed SAMS distributor yet: the IS-04Z1 is pre-launch (certification in progress, no certificate issued, launch planned for Q4 2026), and distributor applications are open.
For the record, no certificate exists for the IS-04Z1 today. The programme is under way ahead of a Q4 2026 launch. An operator's own vendor approval is a separate step. Certification status. Place facts reviewed October 2026.
At a glance · intrinsically safe
Checklist: intrinsically safe smartphone for South Africa
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Level of protection | ia, ib or ic matched to the zone | ib, for Zone 1 |
| Entity parameters | Uo, Io and Po within the device limits | Published with the certificate |
| Accessories | Chargers and cases certified with the device | Defined at certification |
| Where it applies | South Africa: Milnerton, Cape Town, Mossel Bay, Western Cape, Durban | Classified by the site operator |
Product · South Africa
The product behind this search: the SAMS IS-04Z1.
SAMS IS-04Z1
An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in South Africa. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
- IP68 sealed
- 4,000 mAh battery
- 50 MP camera
- Android 16
- Zone 1 / Zone 21 design target
The market · South Africa
Hazardous-area industry in South Africa
The main operators, industrial areas and sites that the SAMS South Africa market guide covers.
Operators, EPCs and contractors
- Sasol
- Synthetic fuels and chemicals at Secunda and Sasolburg
- Natref
- The inland refinery at Sasolburg
- Astron Energy
- The Cape Town refinery and fuel distribution
- PetroSA
- The gas to liquids complex at Mossel Bay
- Transnet Pipelines
- Fuel pipelines and terminals between Durban and Gauteng
- Eskom
- Coal-fired power stations and their coal handling plants
Industrial areas and sites
- Secunda, Mpumalanga
- Synthetic fuels and chemicals complex
- Sasolburg, Free State
- Chemicals production and the Natref refinery
- Milnerton, Cape Town
- The Astron Energy refinery
- Mossel Bay, Western Cape
- Gas to liquids complex and offshore gas
- Durban
- Fuel import terminals, tank farms and the chemical cluster
- Richards Bay
- Coal export terminal and bulk liquid storage
Field notes · South Africa
More about South Africa that matters for portable equipment
South Africa: rules and approvals
South Africa has a National Code of Practice for Electrical Machinery in Hazardous Locations under the Occupational Health and Safety Act 1993, with a section on regulatory requirements for explosion-protected apparatus.
South Africa: industry on the ground
Secunda CTL, owned by Sasol, is the world's largest coal liquefaction plant, with capacity of 160,000 barrels a day from units built in 1980 and 1984, so synthetic fuel gas and liquids handling is extensive.
South Africa: geography and layout
Mining areas range from the Witwatersrand gold fields to Limpopo platinum mines such as Two Rivers at Steelpoort, so remote sites and deep underground workings are both common.
The term · intrinsically safe
What “intrinsically safe” means for a smartphone
Intrinsic safety limits the electrical and thermal energy in a circuit so that neither a spark nor a hot surface can ignite a gas or dust atmosphere, even when a fault occurs. The ib level, used for Zone 1, tolerates one fault. It is the usual way to make a handheld device that a worker carries continuously through a hazardous area.
The IS-04Z1 is designed on this principle for Zone 1 and Zone 21 (marking target II 2 G Ex ib IIC T4). Intrinsic safety is a design basis, not a certificate: certification is in progress and none has been issued yet.
In South Africa. Intrinsic safety suits long inspection routes across very large sites such as Secunda and the Mpumalanga coalfields, where process plant and conveyor routes offer no safe-area socket mid-shift. A handheld that limits ignition energy allows camera, torch and GNSS use on the round without leaving the area.
The route · distribution
Distributing the IS-04Z1 in South Africa
A distributor for South Africa would carry the IS-04Z1 after certification completes; the Q4 2026 launch is the planning date and no appointment has been made. SAMS reviews applicants one by one and prefers companies with their own Ex-competent technical and service staff, since certified devices must not be repaired outside approved channels.
What SAMS looks for in a partner
- Operator relationships
- Existing supplier registrations or a clear route to them with the main operators and contractors in South Africa.
- Ex-competent staff
- People who understand zone classification, markings and the conditions of a certificate.
And equally important
- Local-language support
- Documentation, training and helpdesk in the languages the workforce uses.
- Service capability
- Spares, battery replacement and repair routed through SAMS-approved channels.
Questions · South Africa
Frequently asked questions
Can we buy an intrinsically safe smartphone in South Africa today?
Not yet. The IS-04Z1 is pre-launch and its certification is still in progress ahead of a Q4 2026 launch. No unit goes into a classified area before the certificate covering it exists. The datasheet, the certification schedule and safe-area evaluation units are available now.
What does an intrinsically safe smartphone in South Africa cost?
There is no list price yet. SAMS gives indicative pre-launch pricing in writing, against a stated quantity and site, and does not commit to a lead time before certification completes.
What does ‘intrinsically safe’ mean for the IS-04Z1?
The circuits are designed to limit energy so a spark or hot surface cannot ignite a gas or dust atmosphere, even with one fault (level ib, Zone 1). Certification of that design is in progress.
Which sites in South Africa does this cover?
The market guide for South Africa covers Secunda, Mpumalanga, Sasolburg, Free State, Milnerton, Cape Town, Mossel Bay, Western Cape, among others. Site-level pages are linked below.
How do I become a SAMS distributor for South Africa?
Apply through the distributor page with your company details and the territory you cover. SAMS reviews applications company by company and has not yet granted a territory for South Africa.
Do mines in South Africa have different requirements from process plants?
Underground mines typically use Group I classification, with methane and coal-dust risks, while surface plants use Group II and III. SANS standards such as SANS 1515 cover mine gas-measuring equipment. Ask the mine or plant engineer which group and protection level the area drawing specifies before ordering.
Is there a national code for hazardous locations in South Africa?
Yes. The National Code of Practice for Electrical Machinery in Hazardous Locations sits under the Occupational Health and Safety Act 1993 and refers to SANS standards. Mines also have their own regulations and standards, so confirm which rules apply with the site's engineering and compliance team.
Can the IS-04Z1 be used underground in a South African mine?
No. Underground mining is equipment Group I, which is outside the scope of this device. The IS-04Z1 targets surface areas such as coal handling plants and process units using Zone 1 and Zone 21. Confirm the area and equipment group with the mine's safety officer.
Related guides
Keep exploring
Related guides for South Africa and for South Africa.
IECEx Mobile Phone Distributor in South AfricaSame place, different guide
Ex-Proof Mobile Phone Supplier in South AfricaSame place, different guide
Explosion-Proof Mobile Phone in South AfricaSame place, different guide
Industrial Mobile Phone in South AfricaSame place, different guide
ATEX and IECEx Mobile Phone Supplier in South AfricaSame place, different guide
Hazardous Area Mobile Phone Distributor in South AfricaSame place, different guide
South Africa market guideCertification route and regulators
All guides for South AfricaEvery route we cover
Certification statusWhat is in progress
Enquiry · South Africa
Ask about the IS-04Z1 for South Africa
Share the site details and quantity. You will get the datasheet and the certification schedule back by email; pricing is indicative only until launch.
Enquiry · South Africa
Launching Q4 2026
Planning for South Africa?
Name the site and the operator and we will send what is available before launch.