Seatrium yards
Seatrium's own contact page lists a Pioneer Yard at 50 Gul Road, a Benoi Yard at 15 Benoi Road and a Tuas Yard at 51 Pioneer Sector 1.
Pioneer is a heavily industrial planning area of 12.2 square kilometres in western Singapore, part of the Jurong Industrial Estate. Joo Koon MRT station opened on 28 February 2009 to serve Jurong Industrial Estate, and the East-West Line now runs further west to Tuas Link, so the estate has a direct rail link for staff. Distribution partners for Pioneer, Jurong Industrial Estate are being identified ahead of the Q4 2026 launch of the IS-04Z1.
Pre-launch · certification in progress · Launching Q4 2026
Short answer. Pioneer, Jurong Industrial Estate has no appointed SAMS distributor yet: the IS-04Z1 is pre-launch (certification in progress, no certificate issued, launch planned for Q4 2026), and distributor applications are open.
Where things stand: the IS-04Z1 has not launched, and none of its four certification routes has produced a certificate yet. Operator approval runs on its own timeline. Certification status. Place facts reviewed October 2026.
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Level of protection | ia, ib or ic matched to the zone | ib, for Zone 1 |
| Entity parameters | Uo, Io and Po within the device limits | Published with the certificate |
| Accessories | Chargers and cases certified with the device | Defined at certification |
| Where it applies | Pioneer, Jurong Industrial Estate: Shipyard and marine work areas, Paint and coating shops, Fabrication yards | Classified by the site operator |

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Pioneer Industrial Area. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
A short profile of the site and the kinds of classified area that matter for portable equipment.
Seatrium's own contact page lists a Pioneer Yard at 50 Gul Road, a Benoi Yard at 15 Benoi Road and a Tuas Yard at 51 Pioneer Sector 1.
ST Engineering bought the roughly 141,000 square metre Gul yard in 2023 for ship repair, in addition to its Benoi yard, which is mainly for shipbuilding.
Seatrium lists Pioneer Yard at 50 Gul Road, Tuas Yard at 51 Pioneer Sector 1 and Benoi Yard at 15 Benoi Road, three separate gates within the same western industrial belt.
Seatrium's Pioneer Yard has a 1,400 metre quay with 8 to 10 metres of depth, and a second yard adds a 350 metre quay, giving long continuous berths for vessels under repair.
Pioneer is bounded by Jurong West, Boon Lay, Tuas and the Jurong Strait, and has five subzones: Benoi Sector, Gul Basin, Gul Circle, Joo Koon and Pioneer Sector.
The area was once called Jalan Besi, meaning Metal Road, until JTC renamed local roads in English during the development of Jurong Industrial Estate.
Intrinsic safety limits the electrical and thermal energy in a circuit so that neither a spark nor a hot surface can ignite a gas or dust atmosphere, even when a fault occurs. The ib level, used for Zone 1, tolerates one fault. It is the usual way to make a handheld device that a worker carries continuously through a hazardous area.
The IS-04Z1 is designed on this principle for Zone 1 and Zone 21 (marking target II 2 G Ex ib IIC T4). Intrinsic safety is a design basis, not a certificate: certification is in progress and none has been issued yet.
In Pioneer, Jurong Industrial Estate. Fabrication yards and shipyard work areas mix general work with occasional classified spaces. A handheld intrinsically safe device lets an inspector move between them without changing equipment, photographing coatings and logging measurements. The IS-04Z1 is designed for Zone 1 use, with a 50 MP camera.
SAMS is appointing authorised distributors ahead of the Q4 2026 launch. No territory has been granted for Pioneer, Jurong Industrial Estate yet and applications are reviewed company by company. Because a certified Ex device cannot be opened by an ordinary phone workshop without invalidating its certificate, SAMS looks for partners who can provide competent technical support and after-sales service locally.
Not today. Until the certificates are issued the IS-04Z1 stays out of classified areas, and until launch there is nothing to purchase. You can ask for the datasheet and the certification schedule, or book a safe-area evaluation unit.
No price is published. While certification is in progress there is no list price and no committed lead time, and a supplier quoting a firm figure for an uncertified Ex handset is promising something it cannot stand behind. Indicative pre-launch pricing is issued in writing against a stated quantity and site.
The circuits are designed to limit energy so a spark or hot surface cannot ignite a gas or dust atmosphere, even with one fault (level ib, Zone 1). Certification of that design is in progress.
Likely candidates are shipyard and marine work areas, paint and coating shops, fabrication yards. Which areas are classified, and to what zone, is set by the site operator's own area classification drawings.
Apply through the distributor page with your company details and the territory you cover. SAMS reviews applications company by company and has not yet granted a territory for Pioneer, Jurong Industrial Estate.
Not necessarily. Each yard has its own address, switchboard and gate, and contractor induction and permit steps are normally run per yard and per project. Ask your sponsor for the rules for the specific yard and the vessel you will board.
Seatrium describes repair and upgrade work on LNG and LPG carriers, floating production units, jack-up rigs, tankers, container ships and heavy-lift vessels. Gas carriers and floating production units generally bring the strictest hazardous-area controls.
No. Each tenant has a different hazard profile, and classification is set tenant by tenant. A coating shop, a dry dock and a fabrication yard can differ. Confirm with the site operator which areas, if any, are classified before choosing a handheld for the task.
Other guides for Pioneer Industrial Area, other places in Singapore, and the pages behind them.
Share the site details and quantity. You will get the datasheet and the certification schedule back by email; pricing is indicative only until launch.
Send the zone and gas group of your site and we will reply with the datasheet and schedule.