SABIC: industry on the ground
SABIC's production grew from 6.5 million tonnes in 1985 to more than 60 million tonnes by 2012, with ethylene and its derivatives among the key products.
SABIC is a Saudi chemicals company headquartered in Riyadh, 70% owned by Saudi Aramco with the rest publicly traded. SABIC's manufacturing network in Saudi Arabia consists of 18 affiliates, most in Al-Jubail Industrial City on the Gulf, two in Yanbu on the Red Sea and one in Dammam. Buyers searching for an intrinsically safe mobile phone supplier for SABIC can take the datasheet and the certification schedule for the IS-04Z1 now; supply follows certification.
Pre-launch · certification in progress · Launching Q4 2026
Short answer. An intrinsically safe mobile phone for SABIC cannot be bought yet: the SAMS IS-04Z1 is pre-launch (certification in progress, no certificate issued), and the datasheet, certification schedule and safe-area evaluation units are available now.
Where things stand: the IS-04Z1 has not launched, and none of its four certification routes has produced a certificate yet. Operator approval runs on its own timeline. Certification status. Place facts reviewed October 2026.
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Level of protection | ia, ib or ic matched to the zone | ib, for Zone 1 |
| Entity parameters | Uo, Io and Po within the device limits | Published with the certificate |
| Accessories | Chargers and cases certified with the device | Defined at certification |
| Where it applies | SABIC: Fertiliser units, Chemical storage and handling, Petrochemical plants | Classified by the site operator |

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Saudi Arabia. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
A short profile of its operations and the kinds of classified area that matter for portable equipment.
SABIC runs a Supplier Portal (supplier.sabic.com): applicants use the Supplier Registration link and complete a short form, after which SABIC's supplier relationship team sends instructions for the full registration. Confirm current requirements with its procurement and HSE teams. The Ex certificate and an organisation's own vendor or engineering approval are two separate timelines; SAMS is working towards both and holds neither today.
SABIC's production grew from 6.5 million tonnes in 1985 to more than 60 million tonnes by 2012, with ethylene and its derivatives among the key products.
SABIC employs more than 40,000 people globally, and its Saudi manufacturing is concentrated in a few industrial cities, mainly Jubail, rather than spread across the Kingdom.
Saudi Aramco agreed to buy a 70 per cent stake in SABIC from the Public Investment Fund in 2019 and the transaction completed in June 2020, linking SABIC closely to Aramco feedstock.
Jubail is on the Gulf coast and Yanbu on the Red Sea, on opposite sides of the Kingdom, so equipment planning, logistics and climate differ between the two sites.
Intrinsic safety limits the electrical and thermal energy in a circuit so that neither a spark nor a hot surface can ignite a gas or dust atmosphere, even when a fault occurs. The ib level, used for Zone 1, tolerates one fault. It is the usual way to make a handheld device that a worker carries continuously through a hazardous area.
The IS-04Z1 is designed on this principle for Zone 1 and Zone 21 (marking target II 2 G Ex ib IIC T4). Intrinsic safety is a design basis, not a certificate: certification is in progress and none has been issued yet.
In SABIC. Plant rounds across petrochemical, polymer and fertiliser units and chemical storage involve gauge readings, valve checks and permit-linked inspections. A handheld designed for intrinsic safety could do the work of photos, checklists and calls in classified spots if its certificate allows. Permit rules at Jubail and Yanbu belong to SABIC.
There is no stock to order for SABIC yet. The IS-04Z1 is pre-launch, certification is in progress, and supply will run through authorised distributors after the certificates are issued. Procurement teams can prepare now with the datasheet, the certification schedule and a safe-area evaluation.
The technical specification, marking target and conditions of use, sent by email.
Which certificates are in progress, in what order, and what is still to be confirmed.
Evaluation units can be used for connectivity, MDM enrolment and workflow testing outside classified areas.
Tell us the site, zone, gas group and quantity so the right authorised distributor can contact you.
Not yet. The IS-04Z1 is pre-launch and its certification is still in progress ahead of a Q4 2026 launch. No unit goes into a classified area before the certificate covering it exists. The datasheet, the certification schedule and safe-area evaluation units are available now.
There is no list price yet. SAMS gives indicative pre-launch pricing in writing, against a stated quantity and site, and does not commit to a lead time before certification completes.
The circuits are designed to limit energy so a spark or hot surface cannot ignite a gas or dust atmosphere, even with one fault (level ib, Zone 1). Certification of that design is in progress.
SABIC runs a Supplier Portal (supplier.sabic.com): applicants use the Supplier Registration link and complete a short form, after which SABIC's supplier relationship team sends instructions for the full registration. Confirm current requirements with its procurement and HSE teams.
Through authorised distributors once certificates exist. Until then SAMS can send the datasheet and certification schedule and arrange safe-area evaluation units.
No. SABIC works through affiliates such as United and Yansab in Jubail and Yanbu, and each plant normally runs its own operations, HSE and approved-vendor lists, even though group standards apply. Confirm the supplier registration and equipment approval route with the specific affiliate's procurement and HSE teams.
Cracker and polymer plants, tank farms, loading areas and fertiliser units typically contain flammable gas and liquid areas, and polymer powder handling can add combustible dust zones. Each affiliate issues its own area classification, so request the drawings and the gas group and temperature class before choosing equipment.
It is designed to suit intrinsically safe handheld use, with EMM and MDM enrolment for contractor fleets and IP68 for the coastal climate. Suitability depends on the area classification and the final certificate. No certificate has been issued yet, so ask the site operator before planning deployment.
Related guides for SABIC and for Saudi Arabia.
Send the site, zone and gas group and roughly how many handsets. We reply by email with the datasheet and the certification schedule.
Tell us the zone, gas group and operator. We will send the datasheet and the certification schedule.