SABIC: projects and investment
SABIC partners in three regional ventures based in Bahrain as well as its Saudi affiliates, so Gulf-wide operations share some site practice.
SABIC is a Saudi chemicals company headquartered in Riyadh, 70% owned by Saudi Aramco with the rest publicly traded. It makes chemicals, industrial polymers and fertilisers, with major industrial operations in Jubail Industrial City on the Gulf and in Yanbu on the Red Sea. Buyers searching for an IECEx mobile phone supplier for SABIC can take the datasheet and the certification schedule for the IS-04Z1 now; supply follows certification.
Pre-launch · certification in progress · Launching Q4 2026
Short answer. An IECEx mobile phone for SABIC cannot be bought yet: the SAMS IS-04Z1 is pre-launch (certification in progress, no certificate issued), and the datasheet, certification schedule and safe-area evaluation units are available now.
Current position: certification in progress, nothing issued, launch targeted for Q4 2026. An operator's own vendor approval is a separate step. Certification status. Place facts reviewed October 2026.
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Certificate of conformity | Number checkable on the IECEx online register | In progress; not issued |
| Standards edition | The IEC 60079 edition the certificate cites | Stated on the certificate when issued |
| Schedule of conditions | Limits of use, batteries and accessories | Published with the certificate |
| Where it applies | SABIC: Fertiliser units, Chemical storage and handling, Petrochemical plants | Classified by the site operator |

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Saudi Arabia. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
Where it operates and the kinds of classified area a handset would meet there.
SABIC runs a Supplier Portal (supplier.sabic.com): applicants use the Supplier Registration link and complete a short form, after which SABIC's supplier relationship team sends instructions for the full registration. Confirm current requirements with its procurement and HSE teams. The Ex certificate and an organisation's own vendor or engineering approval are two separate timelines; SAMS is working towards both and holds neither today.
SABIC partners in three regional ventures based in Bahrain as well as its Saudi affiliates, so Gulf-wide operations share some site practice.
SABIC's manufacturing network in Saudi Arabia consists of 18 affiliates, most in Al-Jubail Industrial City on the Gulf, two in Yanbu on the Red Sea and one in Dammam.
SABIC was founded by royal decree in September 1976 to turn oil by-products into chemicals, polymers and fertilisers, and its founding turned the fishing villages of Jubail and Yanbu into industrial cities.
Named affiliates include Jubail United Petrochemical Company (United) and Yanbu National Petrochemical Company (Yansab), which operate separately within the group.
IECEx is the international scheme for certifying equipment used in explosive atmospheres. A certificate of conformity is issued by an accredited certification body against a specific edition of the IEC 60079 standards and carries a schedule of conditions of safe use. It is not a legal requirement in most countries on its own, but many national schemes accept it as the technical basis.
The IECEx certificate for the IS-04Z1 is in progress and has not been issued. The marking target is Ex ib IIC T4, the intrinsic safety concept for Zone 1 gas with the hardest gas group (IIC) and a 135 °C temperature class.
In SABIC. At Jubail Industrial City and Yanbu Industrial City, international EPCs and licensors build and maintain plants, and many know the IECEx system. A reviewer should read the certificate of conformity with its schedule of conditions. The IS-04Z1 is designed for IECEx, and certification is in progress, so nothing is available as certified yet.
There is no stock to order for SABIC yet. The IS-04Z1 is pre-launch, certification is in progress, and supply will run through authorised distributors after the certificates are issued. Procurement teams can prepare now with the datasheet, the certification schedule and a safe-area evaluation.
The technical specification, marking target and conditions of use, sent by email.
Which certificates are in progress, in what order, and what is still to be confirmed.
Evaluation units can be used for connectivity, MDM enrolment and workflow testing outside classified areas.
Tell us the site, zone, gas group and quantity so the right authorised distributor can contact you.
Not yet. The IS-04Z1 is pre-launch and its certification is still in progress ahead of a Q4 2026 launch. No unit goes into a classified area before the certificate covering it exists. The datasheet, the certification schedule and safe-area evaluation units are available now.
SAMS has not published a price. Any figure you are offered for an uncertified Ex phone should be treated with caution; written indicative pricing is available for a defined quantity and site.
No. The IECEx certificate is in progress and has not been issued. SAMS will publish the number when it exists.
SABIC runs a Supplier Portal (supplier.sabic.com): applicants use the Supplier Registration link and complete a short form, after which SABIC's supplier relationship team sends instructions for the full registration. Confirm current requirements with its procurement and HSE teams.
Through authorised distributors once certificates exist. Until then SAMS can send the datasheet and certification schedule and arrange safe-area evaluation units.
No. SABIC works through affiliates such as United and Yansab in Jubail and Yanbu, and each plant normally runs its own operations, HSE and approved-vendor lists, even though group standards apply. Confirm the supplier registration and equipment approval route with the specific affiliate's procurement and HSE teams.
Cracker and polymer plants, tank farms, loading areas and fertiliser units typically contain flammable gas and liquid areas, and polymer powder handling can add combustible dust zones. Each affiliate issues its own area classification, so request the drawings and the gas group and temperature class before choosing equipment.
It is designed to suit intrinsically safe handheld use, with EMM and MDM enrolment for contractor fleets and IP68 for the coastal climate. Suitability depends on the area classification and the final certificate. No certificate has been issued yet, so ask the site operator before planning deployment.
Related guides for SABIC and for Saudi Arabia.
Send the site, zone and gas group and roughly how many handsets. We reply by email with the datasheet and the certification schedule.
Send the zone and gas group of your site and we will reply with the datasheet and schedule.