Petrobras: industry on the ground
Brazil accounted for 92% of Petrobras's worldwide production in 2014, and daily output was reported at about 2.99 million barrels of oil equivalent in 2025, so most activity is concentrated domestically.
Petrobras is a majority state-owned Brazilian integrated oil and gas company headquartered in Rio de Janeiro. The company runs six business areas: refining, transport and marketing; exploration and production; distribution; gas and power; international; and biofuels, so a buyer must identify which area controls a given site. This page sets out how an intrinsically safe mobile phone supply route to Petrobras will work for the IS-04Z1, and what is and is not available before launch.
Pre-launch · certification in progress · Launching Q4 2026
Short answer. An intrinsically safe mobile phone for Petrobras cannot be bought yet: the SAMS IS-04Z1 is pre-launch (certification in progress, no certificate issued), and the datasheet, certification schedule and safe-area evaluation units are available now.
For the record, no certificate exists for the IS-04Z1 today. The programme is under way ahead of a Q4 2026 launch. An operator's own vendor approval is a separate step. Certification status. Place facts reviewed October 2026.
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Level of protection | ia, ib or ic matched to the zone | ib, for Zone 1 |
| Entity parameters | Uo, Io and Po within the device limits | Published with the certificate |
| Accessories | Chargers and cases certified with the device | Defined at certification |
| Where it applies | Petrobras: Gas processing, Fuel terminals, Offshore platforms and FPSOs | Classified by the site operator |

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Brazil. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
Where it operates and the kinds of classified area a handset would meet there.
Suppliers register through the Petronect portal: identify the company, select supply families, submit documents and pass technical evaluation to receive a registration certificate (CRC). The Corporate Registry is open to foreign companies; the Simplified Registry is for Brazilian companies only. The Ex certificate and an organisation's own vendor or engineering approval are two separate timelines; SAMS is working towards both and holds neither today.
Brazil accounted for 92% of Petrobras's worldwide production in 2014, and daily output was reported at about 2.99 million barrels of oil equivalent in 2025, so most activity is concentrated domestically.
Its refineries include REPLAN at Paulinia (listed at about 415,000 barrels a day), REDUC at Duque de Caxias, RNEST at Suape and REFAP at Canoas, spread across several states.
The Agencia Nacional do Petroleo, Gas Natural e Biocombustiveis (ANP) regulates and supervises the industry, so exploration, production and fuel facilities answer to this national agency as well as to the operator.
Petrobras was created in 1953 with the slogan 'The Oil is Ours' and a legal monopoly, and that monopoly ended with Law 9.478 of 1997, which also created the national petroleum regulator ANP.
Intrinsic safety limits the electrical and thermal energy in a circuit so that neither a spark nor a hot surface can ignite a gas or dust atmosphere, even when a fault occurs. The ib level, used for Zone 1, tolerates one fault. It is the usual way to make a handheld device that a worker carries continuously through a hazardous area.
The IS-04Z1 is designed on this principle for Zone 1 and Zone 21 (marking target II 2 G Ex ib IIC T4). Intrinsic safety is a design basis, not a certificate: certification is in progress and none has been issued yet.
In Petrobras. Offshore rounds on platforms and FPSOs, and inspections at refinery process units and fuel terminals, involve photographing, tag reading and permits in classified areas. A handheld designed as intrinsically safe could carry those tasks on one device. The IS-04Z1 is designed for this, though certification is still in progress.
There is no stock to order for Petrobras yet. The IS-04Z1 is pre-launch, certification is in progress, and supply will run through authorised distributors after the certificates are issued. Procurement teams can prepare now with the datasheet, the certification schedule and a safe-area evaluation.
The technical specification, marking target and conditions of use, sent by email.
Which certificates are in progress, in what order, and what is still to be confirmed.
Evaluation units can be used for connectivity, MDM enrolment and workflow testing outside classified areas.
Tell us the site, zone, gas group and quantity so the right authorised distributor can contact you.
Not today. Until the certificates are issued the IS-04Z1 stays out of classified areas, and until launch there is nothing to purchase. You can ask for the datasheet and the certification schedule, or book a safe-area evaluation unit.
No price is published. While certification is in progress there is no list price and no committed lead time, and a supplier quoting a firm figure for an uncertified Ex handset is promising something it cannot stand behind. Indicative pre-launch pricing is issued in writing against a stated quantity and site.
The circuits are designed to limit energy so a spark or hot surface cannot ignite a gas or dust atmosphere, even with one fault (level ib, Zone 1). Certification of that design is in progress.
Suppliers register through the Petronect portal: identify the company, select supply families, submit documents and pass technical evaluation to receive a registration certificate (CRC). The Corporate Registry is open to foreign companies; the Simplified Registry is for Brazilian companies only.
Through authorised distributors once certificates exist. Until then SAMS can send the datasheet and certification schedule and arrange safe-area evaluation units.
Brazil has its own conformity scheme for equipment in explosive atmospheres, normally run through INMETRO-accredited bodies, rather than relying on ATEX alone. Confirm with Petrobras and the certification body which marking and local certificate are accepted before supplying handheld devices.
Portuguese is the working language across Brazilian sites, so manuals, quick guides and training material are normally expected in Portuguese, with English often acceptable for engineering review. Ask the site's HSE or procurement team which language and format their approval process requires.
Offshore adds salt spray, limited connectivity and confined topsides areas, while refineries have larger process units and more fixed network coverage. Both need the device marking checked against that unit's classification. The IS-04Z1 is not yet certified. Check area documents and the battery plan with Petrobras before use.
Related guides for Petrobras and for Brazil.
Tell us what you need to equip and where. The SAMS team answers by email with the datasheet and where each certification route stands.
Name the site and the operator and we will send what is available before launch.