North Hub project
Reports describe an FPSO designed for 1 billion standard cubic feet of gas a day, in about 2,000 metres of water, with first steel cut in July 2026 and commercial production targeted for the fourth quarter of 2028.
Indonesia's offshore oil and gas includes the Kutai Basin off East Kalimantan, where the Makassar Strait North Hub project, operated by the Searah venture of Eni and Petronas, is building a floating production unit. Platforms, FPSOs and drilling rigs are classified hazardous areas. If you are specifying an intrinsically safe mobile phone for Indonesian offshore oil and gas fields, this page covers the markings, the approvals and the current certification status of the IS-04Z1.
Pre-launch · certification in progress · Launching Q4 2026
Short answer. The SAMS IS-04Z1 is the intrinsically safe smartphone covered here for Indonesian offshore oil and gas fields: pre-launch, designed for Zone 1 and Zone 21 (marking target Ex ib IIC T4), with certification in progress and no certificate issued.
Status: pre-launch. IECEx, ATEX, UKEX and NEC 500 certification is in progress and no certificate has been issued; launch is planned for Q4 2026. Operator approval runs on its own timeline. Certification status. Place facts reviewed October 2026.
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Level of protection | ia, ib or ic matched to the zone | ib, for Zone 1 |
| Entity parameters | Uo, Io and Po within the device limits | Published with the certificate |
| Accessories | Chargers and cases certified with the device | Defined at certification |
| Where it applies | Indonesian offshore oil and gas fields: Offshore production platforms, FPSO process and storage areas, Drilling rigs | Classified by the site operator |

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Indonesia Offshore Rigs. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
Who operates there and which kinds of classified area a handset would meet, from the SAMS site research.
Reports describe an FPSO designed for 1 billion standard cubic feet of gas a day, in about 2,000 metres of water, with first steel cut in July 2026 and commercial production targeted for the fourth quarter of 2028.
Crews and equipment move by supply vessel or helicopter, so equipment is normally certified and approved before mobilisation.
The Batam Industrial Development Authority, now BP Batam, was created by a 1973 presidential decree to manage a 415 square kilometre industrial complex for heavy industry, where previously only Pertamina was based.
The Tangguh field in Bintuni Bay, West Papua, has estimated proven gas reserves of 4.4 trillion cubic feet, with annual output hoped to reach about 7.6 million tonnes of liquefied natural gas.
The Masela block, east of Timor island, was described as likely to become Indonesia's biggest deepwater gas project, with over 10 trillion cubic feet of gas and an estimated 14 to 19 billion dollars of investment.
Indonesia was a significant oil exporter in the 1980s, but since 2000 consumption has risen while production has fallen, so offshore and mature-field drilling carries national importance.
Intrinsic safety limits the electrical and thermal energy in a circuit so that neither a spark nor a hot surface can ignite a gas or dust atmosphere, even when a fault occurs. The ib level, used for Zone 1, tolerates one fault. It is the usual way to make a handheld device that a worker carries continuously through a hazardous area.
The IS-04Z1 is designed on this principle for Zone 1 and Zone 21 (marking target II 2 G Ex ib IIC T4). Intrinsic safety is a design basis, not a certificate: certification is in progress and none has been issued yet.
In Indonesian offshore oil and gas fields. Offshore rounds cover wellhead areas, drilling decks and FPSO process and storage spaces, where crew time is costly and access is limited. A handheld designed for intrinsic safety could carry permits, checklists and photos in one device, once certified and accepted by the operator.
A short checklist for anyone writing or reviewing the specification, with the IS-04Z1 status against each point.
No. Nothing can be bought or taken into a classified area today: certification is in progress and launch is planned for Q4 2026. What is available now is the datasheet, the written certification schedule and evaluation units for safe-area use.
No price is published. While certification is in progress there is no list price and no committed lead time, and a supplier quoting a firm figure for an uncertified Ex handset is promising something it cannot stand behind. Indicative pre-launch pricing is issued in writing against a stated quantity and site.
The circuits are designed to limit energy so a spark or hot surface cannot ignite a gas or dust atmosphere, even with one fault (level ib, Zone 1). Certification of that design is in progress.
Likely candidates are offshore production platforms, fpso process and storage areas, drilling rigs, wellhead areas. Which areas are classified, and to what zone, is set by the site operator's own area classification drawings.
Not exactly. Explosion proof is a broad everyday term; intrinsic safety is one protection concept, which limits energy so ignition cannot occur. Flameproof (Ex d) is a different concept that contains an explosion. The IS-04Z1 is intrinsically safe by design.
Rigs are normally supplied from shore bases by supply boat or helicopter, so deliveries follow set schedules and weight limits. Plan spare batteries and chargers well ahead, and confirm customs and radio type-approval needs for each landing point.
Rigs typically follow the standards of their flag state or classification society, often IECEx or ATEX based, together with the operator's own rules. Confirm with the rig operator which certification marks it accepts for portable devices and how permits to work are issued.
Crews and equipment move by supply vessel or helicopter, so replacing or approving a device on the platform is slow. Operators therefore expect certification and approval onshore. Ask the operator or its contractor for the approval route. Confirm with them.
Other guides for Indonesia Offshore Rigs, other places in Indonesia, and the pages behind them.
Send the site, zone and gas group and roughly how many handsets. We reply by email with the datasheet and the certification schedule.
Tell us the zone, gas group and operator. We will send the datasheet and the certification schedule.