Nickel hubs
The Indonesia Morowali Industrial Park, begun in 2013 in Central Sulawesi, is reported to be the largest nickel-based industrial area, with 11 smelters.
Indonesian mining includes coal in Kalimantan, nickel in Sulawesi and the Grasberg copper-gold complex in Papua. Nickel laterite is processed in Indonesia by methods including high-pressure acid leaching, which brings pressurised acid and chemical handling areas into mine-site processing plants. An intrinsically safe mobile phone distributor in Indonesian mining regions would carry the IS-04Z1 to these buyers once certification completes.
Pre-launch · certification in progress · Launching Q4 2026
Short answer. Indonesian mining regions has no appointed SAMS distributor yet: the IS-04Z1 is pre-launch (certification in progress, no certificate issued, launch planned for Q4 2026), and distributor applications are open.
Where things stand: the IS-04Z1 has not launched, and none of its four certification routes has produced a certificate yet. Operator approval runs on its own timeline. Certification status. Place facts reviewed October 2026.
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Level of protection | ia, ib or ic matched to the zone | ib, for Zone 1 |
| Entity parameters | Uo, Io and Po within the device limits | Published with the certificate |
| Accessories | Chargers and cases certified with the device | Defined at certification |
| Where it applies | Indonesian mining regions: Underground mine areas, Smelter and process plant areas, Coal handling and preparation plants (dust, Zone 21) | Classified by the site operator |

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Indonesia Mining. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
A short profile of the site and the kinds of classified area that matter for portable equipment.
The Indonesia Morowali Industrial Park, begun in 2013 in Central Sulawesi, is reported to be the largest nickel-based industrial area, with 11 smelters.
Hot, wet tropical conditions at lowland sites; cooler and very wet in the Papua highlands.
PT Borneo Alumina Indonesia finished an alumina refinery in West Kalimantan with a capacity of 1 million tonnes a year, starting operations in December 2024, and Freeport built a 0.6 million tonne copper smelter at Manyar in East Java.
Nickel output reached about 2.2 million tonnes in 2023 and relies heavily on coal-fired power, accounting for around 22 percent of national energy and industrial emissions, so captive coal power plants sit beside many smelters.
The Indonesia Morowali Industrial Park in Central Sulawesi, the country's largest nickel processing site, covers 2,000 hectares and is served by its own seaport, an airport and a 2 GW coal power plant.
In 2024 Indonesia was estimated to be the world's leading producer of mined nickel at 62 percent of global output, and second for tin at 19 percent and cobalt at 12 percent.
Intrinsic safety limits the electrical and thermal energy in a circuit so that neither a spark nor a hot surface can ignite a gas or dust atmosphere, even when a fault occurs. The ib level, used for Zone 1, tolerates one fault. It is the usual way to make a handheld device that a worker carries continuously through a hazardous area.
The IS-04Z1 is designed on this principle for Zone 1 and Zone 21 (marking target II 2 G Ex ib IIC T4). Intrinsic safety is a design basis, not a certificate: certification is in progress and none has been issued yet.
In Indonesian mining regions. Mine inspections, fuel storage checks and plant rounds are spread over large, remote sites. A handheld designed for intrinsically safe use could keep checklists and photos on one device, but only where its gas marking suits the area. Underground and dust areas need separate assessment.
A distributor for Indonesian mining regions would carry the IS-04Z1 after certification completes; the Q4 2026 launch is the planning date and no appointment has been made. SAMS reviews applicants one by one and prefers companies with their own Ex-competent technical and service staff, since certified devices must not be repaired outside approved channels.
Not yet. The IS-04Z1 is pre-launch and its certification is still in progress ahead of a Q4 2026 launch. No unit goes into a classified area before the certificate covering it exists. The datasheet, the certification schedule and safe-area evaluation units are available now.
No price is published. While certification is in progress there is no list price and no committed lead time, and a supplier quoting a firm figure for an uncertified Ex handset is promising something it cannot stand behind. Indicative pre-launch pricing is issued in writing against a stated quantity and site.
The circuits are designed to limit energy so a spark or hot surface cannot ignite a gas or dust atmosphere, even with one fault (level ib, Zone 1). Certification of that design is in progress.
Likely candidates are coal handling and preparation plants (dust, zone 21), fuel and lubricant storage, underground mine areas, smelter and process plant areas. Which areas are classified, and to what zone, is set by the site operator's own area classification drawings.
Apply through the distributor page with your company details and the territory you cover. SAMS reviews applications company by company and has not yet granted a territory for Indonesian mining regions.
Mining activity falls under the Energy and Mineral Resources Ministry, with the Directorate General of Mineral and Coal setting policy under the mining law. Equipment and radio requirements may involve other agencies, so confirm approvals with the operator and your adviser.
Many sites are in Kalimantan, Sulawesi or Papua and need sea or air freight plus long road legs. Typically contractors stock spare batteries and chargers on site, and allow longer lead times for repairs and import clearance.
The target marking, II 2 G Ex ib IIC T4, is for gas atmospheres. Coal preparation plants are dust areas, which need a dust marking and separate assessment. Do not assume coverage. Confirm requirements for each area with the mine operator's safety department.
Other guides for Indonesia Mining, other places in Indonesia, and the pages behind them.
Send the site, zone and gas group and roughly how many handsets. We reply by email with the datasheet and the certification schedule.
Send the zone and gas group of your site and we will reply with the datasheet and schedule.