India: rules and approvals
Telecom approvals involve TEC's MTCTE scheme, WPC Equipment Type Approval for radio equipment, BIS registration for electronics, and trusted-source designation for equipment connected to licensed networks.
The IS-04Z1 is designed for people who work inside classified areas at Indian refineries, gas plants, LNG jetties and API blocks: field operators, inspection engineers, shift in-charges, and the HSE and materials teams whose sign-off a device has to survive. This page explains what to look for in an industrial mobile phone for India, and where the IS-04Z1 stands against that list today.
Pre-launch · certification in progress · Launching Q4 2026
Short answer. The SAMS IS-04Z1 is the intrinsically safe smartphone covered here for India: pre-launch, designed for Zone 1 and Zone 21 (marking target Ex ib IIC T4), with certification in progress and no certificate issued.
Current position: certification in progress, nothing issued, launch targeted for Q4 2026. A buyer's engineering review is separate from the certificate. Certification status. Place facts reviewed October 2026.
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Ingress protection | IP rating for dust and water | IP68 design |
| Fleet management | EMM and MDM support | Android 16 with EMM and MDM |
| Explosion protection | A separate certificate and marking | In progress; not issued |
| Where it applies | India: Jamnagar, Gujarat, Dahej and the Gujarat PCPIR, Hazira and Surat | Classified by the site operator |

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in India. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
The main operators, industrial areas and sites that the SAMS India market guide covers.
Telecom approvals involve TEC's MTCTE scheme, WPC Equipment Type Approval for radio equipment, BIS registration for electronics, and trusted-source designation for equipment connected to licensed networks.
The Jamnagar refinery in Gujarat, commissioned in July 1999, now has installed capacity of 1.24 million barrels a day, the most at any single location in the world.
A July 2025 PESO procedure accepts an IECEx certificate with test report for all manufacturers, and EU-type examination certificates only from EU-based manufacturers.
PESO approval from the Chief Controller of Explosives is required for Ex electrical apparatus at petroleum, gas cylinder and pressure vessel premises, under rules such as the Petroleum Rules 2002.
“Industrial” describes a phone built for plant conditions: sealed, drop-resistant and manageable at fleet scale through Android Enterprise. It does not by itself mean the phone may enter a classified area. Only a device with a valid explosion-protection certificate and marking may do that.
The IS-04Z1 is designed to be both an industrial Android phone (IP68, 4,000 mAh battery, 50 MP camera, Android 16 with EMM and MDM support) and an intrinsically safe one. Its explosion-protection certificates are in progress and have not been issued.
In India. Indian sites mix operator staff and large contractor crews for shutdowns, so EMM or MDM enrolment helps provision and remove devices by contract. The IS-04Z1 is designed for managed deployment. Charging belongs in safe areas, and connectivity at remote or offshore-support sites needs planning with the site team.
A short checklist for anyone writing or reviewing the specification, with the IS-04Z1 status against each point.
No. Nothing can be bought or taken into a classified area today: certification is in progress and launch is planned for Q4 2026. What is available now is the datasheet, the written certification schedule and evaluation units for safe-area use.
There is no list price yet. SAMS gives indicative pre-launch pricing in writing, against a stated quantity and site, and does not commit to a lead time before certification completes.
Yes by design: IP68 sealing, a 4,000 mAh battery, a 50 MP camera and Android 16 with EMM and MDM support. The explosion-protection certificates are separate and still in progress.
The market guide for India covers Jamnagar, Gujarat, Dahej and the Gujarat PCPIR, Hazira and Surat, Vadodara, Koyali, Ankleshwar, among others. Site-level pages are linked below.
Not exactly. Explosion proof is a broad everyday term; intrinsic safety is one protection concept, which limits energy so ignition cannot occur. Flameproof (Ex d) is a different concept that contains an explosion. The IS-04Z1 is intrinsically safe by design.
Supplier guides list TEC's MTCTE scheme, WPC Equipment Type Approval for radio equipment, BIS registration and trusted-source designation for network equipment, each with its own scope. Which ones apply depends on the device, so check current requirements with the Department of Telecommunications or an agent.
A July 2025 procedure accepts an IECEx certificate of conformity with its test report from all manufacturers, and EU-type examination certificates from EU-based manufacturers only. Edition lists and document requirements change, so check the current PESO notice or ask a consultant before applying.
The IS-04Z1 has IP68 sealing, which helps with water and dust. That is an ingress rating only, and battery behaviour in heat and humidity is worth testing. Ask for the datasheet's operating ranges and trial a unit on a coastal site round.
More on India, and on other places in India.
Tell us what you need to equip and where. The SAMS team answers by email with the datasheet and where each certification route stands.
Name the site and the operator and we will send what is available before launch.