Australia: rules and approvals
An IECEx certificate for an assembly of several items is not automatically accepted unless it is validated against the current AS/NZS 60079.14 or the assembly is independently inspected.
Australia · IECEx
IECEx Smartphone Supplier in Australia
A Zone 1 / Zone 21 smartphone for crews on Australian LNG trains, offshore facilities, processing plants and remote mine sites. Buyers searching for an IECEx smartphone supplier for Australia can take the datasheet and the certification schedule for the IS-04Z1 now; supply follows certification.
Pre-launch · certification in progress · Launching Q4 2026
Marking targetEx ib IIC T4Intrinsic safety, Zone 1 / 21 design target · certification in progress
AvailabilityQ4 2026via authorised distributors
Search topicIECEx
DeviceSmartphone
RouteSupply
WhereAustralia
Short answer. An IECEx smartphone for Australia cannot be bought yet: the SAMS IS-04Z1 is pre-launch (certification in progress, no certificate issued), and the datasheet, certification schedule and safe-area evaluation units are available now.
Status: pre-launch. IECEx, ATEX, UKEX and NEC 500 certification is in progress and no certificate has been issued; launch is planned for Q4 2026. Operator approval runs on its own timeline. Certification status. Place facts reviewed October 2026.
At a glance · IECEx
Checklist: IECEx smartphone for Australia
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Certificate of conformity | Number checkable on the IECEx online register | In progress; not issued |
| Standards edition | The IEC 60079 edition the certificate cites | Stated on the certificate when issued |
| Schedule of conditions | Limits of use, batteries and accessories | Published with the certificate |
| Where it applies | Australia: Bowen Basin, Queensland, Pilbara, Western Australia, Karratha and the Burrup Peninsula | Classified by the site operator |
Product · Australia
The product behind this search: the SAMS IS-04Z1.
SAMS IS-04Z1
An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Australia. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
- IP68 sealed
- 4,000 mAh battery
- 50 MP camera
- Android 16
- Zone 1 / Zone 21 design target
The market · Australia
Where this applies in Australia
The classified areas, operators and sites below are the ones covered in the SAMS Australia market guide.
Operators, EPCs and contractors
- Woodside Energy
- North West Shelf, Pluto LNG and the Karratha Gas Plant
- Chevron Australia
- Gorgon on Barrow Island and Wheatstone at Onslow
- INPEX
- Ichthys LNG at Darwin and Browse Basin facilities
- Shell Australia
- Prelude FLNG and QCLNG on Curtis Island
- Santos
- GLNG at Gladstone and the Moomba gas plant
- ConocoPhillips and Origin Energy
- Australia Pacific LNG and Surat Basin coal seam gas
Industrial areas and sites
- Karratha and the Burrup Peninsula
- Karratha Gas Plant, Pluto LNG and offshore support
- Onslow, Western Australia
- Wheatstone LNG and the Ashburton North estate
- Darwin
- Ichthys LNG, marine supply base and harbour work
- Gladstone and Curtis Island
- Three LNG trains plus alumina and coal wharves
- Bowen Basin, Queensland
- Coal mining, methane drainage and handling plants
- Pilbara, Western Australia
- Iron ore mines, workshops and bulk fuel handling
Field notes · Australia
More about Australia that matters for portable equipment
Australia: rules and approvals
Australia works on the IECEx scheme and the AS/NZS 60079 series, and the national ANZEx scheme is harmonised with IECEx, so IECEx-certified equipment can be used almost without separate national testing.
Australia: rules and approvals
The Australian Communications and Media Authority regulates the supply of radiocommunications equipment and made rule changes in 2023 to simplify and streamline that regulation.
Australia: rules and approvals
An ATEX marking alone is not automatically accepted, because ATEX is an EU directive that allows self-declaration for some categories, and such equipment usually needs a conformity assessment.
The term · IECEx
What “IECEx” means for a smartphone
IECEx is the international scheme for certifying equipment used in explosive atmospheres. A certificate of conformity is issued by an accredited certification body against a specific edition of the IEC 60079 standards and carries a schedule of conditions of safe use. It is not a legal requirement in most countries on its own, but many national schemes accept it as the technical basis.
The IECEx certificate for the IS-04Z1 is in progress and has not been issued. The marking target is Ex ib IIC T4, the intrinsic safety concept for Zone 1 gas with the hardest gas group (IIC) and a 135 °C temperature class.
In Australia. Australia takes part directly in the IECEx system, and AS/NZS 60079 is harmonised with IEC 60079, so the certificate of conformity is the practical basis for equipment at Woodside, Chevron, INPEX, Shell and Santos sites. The reviewer reads the schedule of conditions for ambient range and special conditions. The ANZEx certificate would follow from the same test reports.
The route · supply
Sourcing the IS-04Z1 for Australia
Nothing can be bought for Australia today: the IS-04Z1 is pre-launch, and SAMS will supply end users through authorised distributors once certificates exist. What a buyer can do now is take the specification, ask for the written certification schedule and arrange a safe-area evaluation, so that the right local channel contacts you at launch.
- 01
Request the datasheet
The technical specification, marking target and conditions of use, sent by email.
- 02
Ask for the certification schedule
Which certificates are in progress, in what order, and what is still to be confirmed.
- 03
Evaluate in a safe area
Evaluation units can be used for connectivity, MDM enrolment and workflow testing outside classified areas.
- 04
Register for launch
Tell us the site, zone, gas group and quantity so the right authorised distributor can contact you.
Questions · Australia
Frequently asked questions
Can we buy an IECEx smartphone in Australia today?
No. Nothing can be bought or taken into a classified area today: certification is in progress and launch is planned for Q4 2026. What is available now is the datasheet, the written certification schedule and evaluation units for safe-area use.
What does an IECEx smartphone in Australia cost?
There is no list price yet. SAMS gives indicative pre-launch pricing in writing, against a stated quantity and site, and does not commit to a lead time before certification completes.
Does the IS-04Z1 hold an IECEx certificate?
No. The IECEx certificate is in progress and has not been issued. SAMS will publish the number when it exists.
Which sites in Australia does this cover?
The market guide for Australia covers Karratha and the Burrup Peninsula, Onslow, Western Australia, Darwin, Gladstone and Curtis Island, among others. Site-level pages are linked below.
How will SAMS supply Australia?
Through authorised distributors once certificates exist. Until then SAMS can send the datasheet and certification schedule and arrange safe-area evaluation units.
Do assemblies of certified items need extra checks in Australia?
Often yes. An IECEx certificate for an assembly is not automatically accepted unless validated against the current AS/NZS 60079.14 or the assembly is independently inspected. Ask the site engineer or an inspection body how a packaged or modular system will be treated before shipping.
Is IECEx certification accepted in Australia?
Yes. Australia accepts a current IECEx or ANZEx Certificate of Conformity under the AS/NZS 60079 series, with the gas group and temperature class matching the classified area. ATEX-only equipment is not automatically accepted. Confirm the installation documentation expected for your site with the operator's electrical engineer.
Can the phone be used in underground coal mines?
No: underground coal equipment is Group I, regulated at state level, which is a different regime from the Group II surface certification the IS-04Z1 targets. Surface coal handling with Zone 21 dust, and gas areas at LNG and processing plants, are the intended duty. Check the classification with the mine operator and regulator.
Related guides
Keep exploring
Related guides for Australia and for Australia.
ATEX and IECEx Mobile Phone Distributor in AustraliaSame place, different guide
Intrinsically Safe Mobile Phone in AustraliaSame place, different guide
Industrial Mobile Phone Distributor in AustraliaSame place, different guide
Ex-Proof Mobile Phone Distributor in AustraliaSame place, different guide
Explosion-Proof Mobile Phone Supplier in AustraliaSame place, different guide
Rugged Mobile Phone Supplier in AustraliaSame place, different guide
Australia market guideCertification route and regulators
All guides for AustraliaEvery route we cover
Certification statusWhat is in progress
Enquiry · Australia
Ask about the IS-04Z1 for Australia
Send the site, zone and gas group and roughly how many handsets. We reply by email with the datasheet and the certification schedule.
Enquiry · Australia
Launching Q4 2026
Planning for Australia?
Send the zone and gas group of your site and we will reply with the datasheet and schedule.