Australia: rules and approvals
An ATEX marking alone is not automatically accepted, because ATEX is an EU directive that allows self-declaration for some categories, and such equipment usually needs a conformity assessment.
Australia · industrial
Industrial Mobile Phone Distributor in Australia
A Zone 1 / Zone 21 smartphone for crews on Australian LNG trains, offshore facilities, processing plants and remote mine sites. Operators typically check for a current IECEx or ANZEx certificate, a suitable gas group and temperature class, a Hazardous Area Verification Dossier under AS/NZS 60079.14 and installer competency. Distribution partners for Australia are being identified ahead of the Q4 2026 launch of the IS-04Z1.
Pre-launch · certification in progress · Launching Q4 2026
Marking targetEx ib IIC T4Intrinsic safety, Zone 1 / 21 design target · certification in progress
AvailabilityQ4 2026via authorised distributors
Search topicindustrial
DeviceMobile Phone
RouteDistribution
WhereAustralia
Short answer. Australia has no appointed SAMS distributor yet: the IS-04Z1 is pre-launch (certification in progress, no certificate issued, launch planned for Q4 2026), and distributor applications are open.
For the record, no certificate exists for the IS-04Z1 today. The programme is under way ahead of a Q4 2026 launch. An operator's own vendor approval is a separate step. Certification status. Place facts reviewed October 2026.
At a glance · industrial
Checklist: industrial mobile phone for Australia
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Ingress protection | IP rating for dust and water | IP68 design |
| Fleet management | EMM and MDM support | Android 16 with EMM and MDM |
| Explosion protection | A separate certificate and marking | In progress; not issued |
| Where it applies | Australia: Darwin, Gladstone and Curtis Island, Bowen Basin, Queensland | Classified by the site operator |
Product · Australia
The product behind this search: the SAMS IS-04Z1.
SAMS IS-04Z1
An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Australia. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
- IP68 sealed
- 4,000 mAh battery
- 50 MP camera
- Android 16
- Zone 1 / Zone 21 design target
The market · Australia
Where an Ex phone is used in Australia
Operators and classified areas drawn from the SAMS Australia market guide.
Operators, EPCs and contractors
- Woodside Energy
- North West Shelf, Pluto LNG and the Karratha Gas Plant
- Chevron Australia
- Gorgon on Barrow Island and Wheatstone at Onslow
- INPEX
- Ichthys LNG at Darwin and Browse Basin facilities
- Shell Australia
- Prelude FLNG and QCLNG on Curtis Island
- Santos
- GLNG at Gladstone and the Moomba gas plant
- ConocoPhillips and Origin Energy
- Australia Pacific LNG and Surat Basin coal seam gas
Industrial areas and sites
- Karratha and the Burrup Peninsula
- Karratha Gas Plant, Pluto LNG and offshore support
- Onslow, Western Australia
- Wheatstone LNG and the Ashburton North estate
- Darwin
- Ichthys LNG, marine supply base and harbour work
- Gladstone and Curtis Island
- Three LNG trains plus alumina and coal wharves
- Bowen Basin, Queensland
- Coal mining, methane drainage and handling plants
- Pilbara, Western Australia
- Iron ore mines, workshops and bulk fuel handling
Field notes · Australia
More about Australia that matters for portable equipment
Australia: people and language
The Pilbara has more than 45,000 residents, most living in the western third in towns such as Port Hedland, Karratha and Wickham, while the eastern third is almost entirely desert.
Australia: geography and layout
The Pilbara covers 507,896 square kilometres in the north of Western Australia, a large, dry, sparsely populated region known for iron ore, with four local government areas.
Australia: rules and approvals
ANZEx has been owned by JAS-ANZ since August 2016, and Queensland's Electrical Safety Regulation 2026 took effect on 1 September 2026, so state rules continue to evolve.
The term · industrial
What “industrial” means for a smartphone
“Industrial” describes a phone built for plant conditions: sealed, drop-resistant and manageable at fleet scale through Android Enterprise. It does not by itself mean the phone may enter a classified area. Only a device with a valid explosion-protection certificate and marking may do that.
The IS-04Z1 is designed to be both an industrial Android phone (IP68, 4,000 mAh battery, 50 MP camera, Android 16 with EMM and MDM support) and an intrinsically safe one. Its explosion-protection certificates are in progress and have not been issued.
In Australia. Rostered crews and contractors rotate through sites, so handsets move between people. Android 16 with EMM and MDM support allows enrolment, remote lock, remote wipe and controlled updates when crews change. Coverage uses 4G LTE, Wi-Fi, Bluetooth and NFC, with four-constellation GNSS holding a position in a pit, and charging stays in a safe area.
The route · distribution
Distributing the IS-04Z1 in Australia
SAMS is appointing authorised distributors ahead of the Q4 2026 launch. No territory has been granted for Australia yet and applications are reviewed company by company. Because a certified Ex device cannot be opened by an ordinary phone workshop without invalidating its certificate, SAMS looks for partners who can provide competent technical support and after-sales service locally.
What SAMS looks for in a partner
- Operator relationships
- Existing supplier registrations or a clear route to them with the main operators and contractors in Australia.
- Ex-competent staff
- People who understand zone classification, markings and the conditions of a certificate.
And equally important
- Local-language support
- Documentation, training and helpdesk in the languages the workforce uses.
- Service capability
- Spares, battery replacement and repair routed through SAMS-approved channels.
Questions · Australia
Frequently asked questions
Can we buy an industrial mobile phone in Australia today?
Not today. Until the certificates are issued the IS-04Z1 stays out of classified areas, and until launch there is nothing to purchase. You can ask for the datasheet and the certification schedule, or book a safe-area evaluation unit.
What does an industrial mobile phone in Australia cost?
No price is published. While certification is in progress there is no list price and no committed lead time, and a supplier quoting a firm figure for an uncertified Ex handset is promising something it cannot stand behind. Indicative pre-launch pricing is issued in writing against a stated quantity and site.
Is the IS-04Z1 an industrial phone as well as an Ex phone?
Yes by design: IP68 sealing, a 4,000 mAh battery, a 50 MP camera and Android 16 with EMM and MDM support. The explosion-protection certificates are separate and still in progress.
Which sites in Australia does this cover?
The market guide for Australia covers Karratha and the Burrup Peninsula, Onslow, Western Australia, Darwin, Gladstone and Curtis Island, among others. Site-level pages are linked below.
How do I become a SAMS distributor for Australia?
Apply through the distributor page with your company details and the territory you cover. SAMS reviews applications company by company and has not yet granted a territory for Australia.
Do assemblies of certified items need extra checks in Australia?
Often yes. An IECEx certificate for an assembly is not automatically accepted unless validated against the current AS/NZS 60079.14 or the assembly is independently inspected. Ask the site engineer or an inspection body how a packaged or modular system will be treated before shipping.
Is IECEx certification accepted in Australia?
Yes. Australia accepts a current IECEx or ANZEx Certificate of Conformity under the AS/NZS 60079 series, with the gas group and temperature class matching the classified area. ATEX-only equipment is not automatically accepted. Confirm the installation documentation expected for your site with the operator's electrical engineer.
Can the phone be used in underground coal mines?
No: underground coal equipment is Group I, regulated at state level, which is a different regime from the Group II surface certification the IS-04Z1 targets. Surface coal handling with Zone 21 dust, and gas areas at LNG and processing plants, are the intended duty. Check the classification with the mine operator and regulator.
Related guides
Keep exploring
More on Australia, and on other places in Australia.
ATEX and IECEx Mobile Phone Supplier in AustraliaSame place, different guide
Rugged Mobile Phone Supplier in AustraliaSame place, different guide
IECEx Mobile Phone Distributor in AustraliaSame place, different guide
Hazardous Area Mobile Phone Distributor in AustraliaSame place, different guide
Ex-Proof Mobile Phone in AustraliaSame place, different guide
Intrinsically Safe Mobile Phone in AustraliaSame place, different guide
Australia market guideCertification route and regulators
All guides for AustraliaEvery route we cover
Certification statusWhat is in progress
Enquiry · Australia
Ask about the IS-04Z1 for Australia
Tell us what you need to equip and where. The SAMS team answers by email with the datasheet and where each certification route stands.
Enquiry · Australia
Launching Q4 2026
Planning for Australia?
Name the site and the operator and we will send what is available before launch.