Skip to content
Certification In Progress · Launching Q4 2026 Become a Distributor
Certification In Progress · Launching Q4 2026 Product Certifications Industries Blog About Contact Become a Distributor
Australia · explosion proof

Explosion-Proof Mobile Phone Supplier in Australia

A Zone 1 / Zone 21 smartphone for crews on Australian LNG trains, offshore facilities, processing plants and remote mine sites. This page sets out how an explosion proof mobile phone supply route to Australia will work for the IS-04Z1, and what is and is not available before launch.

Pre-launch · certification in progress · Launching Q4 2026

SAMS IS-04Z1 intrinsically safe smartphone for Australia, front view
Marking targetEx ib IIC T4Intrinsic safety, Zone 1 / 21 design target · certification in progress
AvailabilityQ4 2026via authorised distributors
Search topicexplosion proof
DeviceMobile Phone
RouteSupply
WhereAustralia

Short answer. An explosion proof mobile phone for Australia cannot be bought yet: the SAMS IS-04Z1 is pre-launch (certification in progress, no certificate issued), and the datasheet, certification schedule and safe-area evaluation units are available now.

Current position: certification in progress, nothing issued, launch targeted for Q4 2026. Operator approval runs on its own timeline. Certification status. Place facts reviewed October 2026.

At a glance · explosion proof

Checklist: explosion proof mobile phone for Australia

Specification checklist against the IS-04Z1 today
CheckWhat to look forIS-04Z1 today
Protection conceptFlameproof (Ex d) or intrinsic safety (Ex i)Intrinsic safety, level ib
Zone suitabilityZone 1 gas and Zone 21 dustDesign target for Zone 1 and 21
CertificateNumber, issuing body and schedule of conditionsIn progress; not issued
Where it appliesAustralia: Bowen Basin, Queensland, Pilbara, Western Australia, Karratha and the Burrup PeninsulaClassified by the site operator
Product · Australia

The product behind this search: the SAMS IS-04Z1.

SAMS IS-04Z1 explosion proof mobile phone, front view

SAMS IS-04Z1

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Australia. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.

  • IP68 sealed
  • 4,000 mAh battery
  • 50 MP camera
  • Android 16
  • Zone 1 / Zone 21 design target
The market · Australia

Hazardous-area industry in Australia

The main operators, industrial areas and sites that the SAMS Australia market guide covers.

Operators, EPCs and contractors

Woodside Energy
North West Shelf, Pluto LNG and the Karratha Gas Plant
Chevron Australia
Gorgon on Barrow Island and Wheatstone at Onslow
INPEX
Ichthys LNG at Darwin and Browse Basin facilities
Shell Australia
Prelude FLNG and QCLNG on Curtis Island
Santos
GLNG at Gladstone and the Moomba gas plant
ConocoPhillips and Origin Energy
Australia Pacific LNG and Surat Basin coal seam gas

Industrial areas and sites

Karratha and the Burrup Peninsula
Karratha Gas Plant, Pluto LNG and offshore support
Onslow, Western Australia
Wheatstone LNG and the Ashburton North estate
Darwin
Ichthys LNG, marine supply base and harbour work
Gladstone and Curtis Island
Three LNG trains plus alumina and coal wharves
Bowen Basin, Queensland
Coal mining, methane drainage and handling plants
Pilbara, Western Australia
Iron ore mines, workshops and bulk fuel handling
Field notes · Australia

More about Australia that matters for portable equipment

Australia: people and language

The Pilbara has more than 45,000 residents, most living in the western third in towns such as Port Hedland, Karratha and Wickham, while the eastern third is almost entirely desert.

Australia: geography and layout

The Pilbara covers 507,896 square kilometres in the north of Western Australia, a large, dry, sparsely populated region known for iron ore, with four local government areas.

Australia: rules and approvals

ANZEx has been owned by JAS-ANZ since August 2016, and Queensland's Electrical Safety Regulation 2026 took effect on 1 September 2026, so state rules continue to evolve.

Australia: rules and approvals

Operators typically check for a current IECEx or ANZEx certificate, a suitable gas group and temperature class, a Hazardous Area Verification Dossier under AS/NZS 60079.14 and installer competency.

The term · explosion proof

What “explosion proof” means for a smartphone

“Explosion proof” is the phrase most buyers use for equipment that may be taken into a classified hazardous area. Strictly, it covers several protection concepts: a flameproof enclosure (Ex d) contains an internal explosion, while intrinsic safety (Ex i) limits electrical energy so that an ignition cannot start. Phones are normally intrinsically safe, because a flameproof handset would be too heavy to carry all shift.

The IS-04Z1 uses intrinsic safety, with a marking target of Ex ib IIC T4, and is designed for Zone 1 and Zone 21. It is pre-launch, certification is in progress and no certificate has been issued.

In Australia. Explosion-proof is the everyday phrase, but at the Karratha Gas Plant or a Curtis Island LNG train the question is which protection concept fits. Flameproof Ex d contains an internal explosion; the IS-04Z1 uses intrinsic safety to limit energy instead, which suits a handheld carried through liquefaction and processing areas. The operator classifies the area.

The route · supply

Sourcing the IS-04Z1 for Australia

Nothing can be bought for Australia today: the IS-04Z1 is pre-launch, and SAMS will supply end users through authorised distributors once certificates exist. What a buyer can do now is take the specification, ask for the written certification schedule and arrange a safe-area evaluation, so that the right local channel contacts you at launch.

  1. 01

    Request the datasheet

    The technical specification, marking target and conditions of use, sent by email.

  2. 02

    Ask for the certification schedule

    Which certificates are in progress, in what order, and what is still to be confirmed.

  3. 03

    Evaluate in a safe area

    Evaluation units can be used for connectivity, MDM enrolment and workflow testing outside classified areas.

  4. 04

    Register for launch

    Tell us the site, zone, gas group and quantity so the right authorised distributor can contact you.

Questions · Australia

Frequently asked questions

Can we buy an explosion proof mobile phone in Australia today?

Not today. Until the certificates are issued the IS-04Z1 stays out of classified areas, and until launch there is nothing to purchase. You can ask for the datasheet and the certification schedule, or book a safe-area evaluation unit.

What does an explosion proof mobile phone in Australia cost?

No price is published. While certification is in progress there is no list price and no committed lead time, and a supplier quoting a firm figure for an uncertified Ex handset is promising something it cannot stand behind. Indicative pre-launch pricing is issued in writing against a stated quantity and site.

Is the IS-04Z1 explosion proof or intrinsically safe?

It is intrinsically safe (marking target Ex ib IIC T4), which is the usual way to make a phone for hazardous areas. It is not a flameproof (Ex d) design, and certification is still in progress.

Which sites in Australia does this cover?

The market guide for Australia covers Karratha and the Burrup Peninsula, Onslow, Western Australia, Darwin, Gladstone and Curtis Island, among others. Site-level pages are linked below.

How will SAMS supply Australia?

Through authorised distributors once certificates exist. Until then SAMS can send the datasheet and certification schedule and arrange safe-area evaluation units.

What conditions affect devices in the Pilbara?

The Pilbara is hot, dry and dusty, with long distances between sites and towns. Check the operating temperature range, dust ingress rating and battery life in heat, and confirm with the operator any site rules on permits, inductions and mobile devices in classified areas.

What is the Hazardous Area Verification Dossier?

It is the installation documentation expected under AS/NZS 60079.14, showing that the equipment, its certificate and its installation suit the classified area. Operators and inspectors look for it before energising equipment, so ask the site electrical team what must be supplied with portable and fixed equipment.

Will a handset cope with Pilbara heat and a long roster day?

The target marking is T4 with the ambient range to be fixed on the certificate, which is not yet issued. The 4,000 mAh battery is sized for a roster day with radio, camera and GNSS running. Check the certified range against your site's worst summer ambient and trial a unit before fleet orders.

Enquiry · Australia

Ask about the IS-04Z1 for Australia

Share the site details and quantity. You will get the datasheet and the certification schedule back by email; pricing is indicative only until launch.

Enquiry · Australia

Please enter your name.
Please enter your company name.
Enter a valid email address.
Please enter your target market.
Please select one.

Launching Q4 2026

Planning for Australia?

Name the site and the operator and we will send what is available before launch.